• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.63-71
• /
• 1989

The objective of this study is to enhance the reliability of the computed results by setting up of an improved treatments onto the open boundary condition for tidal motion in finite domain. By the $L^2-norm$ and RMS error tests, it was revealed that Sommerfeld's radiating condition gives better result than a forced boundary condition. In the numerical tests for a long wave in a simplified rectangular bay, it was found that the computational accuracy of the newly improved technique to the Sommerfeld condition, suggested in this study with the 2 dimensional shallow finite element model, could be improved by 30% of RMS error to the existing Sommerfeld condition.

• Journal of Energy Engineering
• /
• v.5 no.2
• /
• pp.146-152
• /
• 1996

A small power reactor core of 108 MW$\_$th/ was designed with some design constraints: 2 year refueling cycle length, soluble boron free operation, low power density, and proven fuel assembly design - Uljin 3'||'&'||'4 design specifications. CASMO-3 and KINS-3 was used to evaluate operational capability for power level control via control rods. Cycle length, power peaking factor, M.T.C., and power coefficients were also checked. Designed core loaded with KOFAs satisfied all design goals. We found that much more burnable poisons are to be loaded with axial enrichment zoning. Control rod assemblies should be located at every other assemblies with more than 3 banks. Additional shutdown banks are proposed for the safe plant cooldown, which could be located at core periphery.

• Applied Biological Chemistry
• /
• v.27 no.1
• /
• pp.29-33
• /
• 1984

Chemical composition and condition of acid hydrolysis of waste composts during the cultivation of oyster mushroom (Pleurotus ostreatus) were determined. Ash content of composts increased while organic matter content decreased as the cultivation progressed. More than 90% of mushroom was produced from the first and second cropping period. An optimum condition for acid hydrolysis was at 2.0% $H_{2}SO_{4},\;1.5kg/cm^{2}$ vapor pressure for 30min and 20times (acid/compost). Formation of furfural in acid hydrolysis increased remarkably as acid concentration increased.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.5
• /
• pp.349-357
• /
• 2009

Effect of computational domain size in simulating of periodic obstacle flow has been investigated for the flow past tube banks. Reynolds number, defined by freestream velocity ($U_{\infty}$) and cylinder diameter (d), was fixed as 200, and center-to-center distance (P) as 1.5d. In-line square array and staggered square array were considered. Drag coefficient, lift coefficient and Strouhal number were calculated depending on domain size. Circular cylinders were implemented on a Cartesian grid system by using an immersed boundary method. Boundary condition is periodic in both streamwise and lateral directions. Previous studies in literature often use a square domain with a side length of P, which contains only one cylinder. However, this study reveals that the domain size is improper. Especially, RMS values of flow-induced forces are most sensitive to the domain size.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.527-536
• /
• 2009

A cascade apparatus was designed with only one blade. Its passage is a 160% width of the cascade pitch. This kind of apparatus can give more accurate experimental result than those applying multi-blades even though the apparatus is small. However, this causes difficulties to make the periodic condition along the pitchwise direction. In this study, sidewalls were designed to satisfy the periodic condition based on the flow structure using a gradient based optimization and a genetic algorism. The objective function was adopted the surface Mach number obtained on the cascade and fourteen design variables were selected for controlling sidewall shapes. The designed sidewalls using the genetic algorism shows better result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1099-1103
• /
• 2011

Since the mechanical strength and stiffness of wire-woven bulk Kagome (BK) have been theoretically estimated by assuming that WBK is composed of straight struts, the analytical solutions occasionally give substantial errors as compared with the experimental results. The struts of WBK are helically formed, which results in errors in the estimations In this study, for accurately predicting the mechanical properties of WBK, the effects of waviness and brazed part are taken into account for estimating the strength and stiffness of WBK. The results are compared with the measured experimental results and the results estimated by a finite element analysis performed on a unit cell under periodic boundary conditions (PBC).

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.93-99
• /
• 2011

In this study, a series of laboratory experiments are carried out to analyze fluid behaviors around multi-arranged (2 pieces) floating breakwaters with various parameters such as distance between structures, wave periods and steepness. The rate of wave transmission is shown to be affected directly by wave periods of incident waves and the breakwaters with multi-arranged structures show the highest rate of wave protection compared with other cases. The velocity fields around the breakwaters are measured by using the Laser Doppler Velocimetry system. The transmission coefficients are also measured in laboratory experiments. Finally, laboratory observed data are compared with numerical experimental results and analyzed in detail.

• Korean Journal of Ichthyology
• /
• v.13 no.2
• /
• pp.111-116
• /
• 2001

Factors influencing elongation of the ovipositor in the bitterling Rhodeus uyekii were examined under several conditions. The ovipositors of the females were periodically elongated under the presence of mussels or males, and in some cases without either. When females were reared without mussels and males, the ovipositor did not elongate in one fish in a large aquarium, but it did become elongated in another fish in a small aquarium and in many fishes in a large aquarium. Duration of the elongated state of the ovipositor was 1~3 days (mean 1.2~2.5 days) and the periodicity of elongation was 4~15 days (mean 6.4~11.9 days). Length of the elongated ovipositor was 68~100% (mean 78.5~98.8%). Length of ovipositor in the interpeak period was 20~51% (mean 27.3~33.1%); in the post-elongation period it did not elongated further 3~30% (mean 11.1~19.9%). The effect of aquarium size and number of individuals in the aquarium on the elongation of the ovipositor, and inter-specific or inter-generic differences based on previous reports are discussed.

• Tunnel and Underground Space
• /
• v.10 no.1
• /
• pp.45-58
• /
• 2000

Cyclic shear test system, which is capable of measuring flow rate inside rock joint, was established to investigate the hydraulic behavior of rough rock joints under various loading conditions. Laboratory hydraulic tests during compression and shear were conducted for artificial rough rock joints. Prior to tests, aperture characteristics of specimens were examined by measuring surface topography. Permeability changes under compression were well approximated with several hydraulic model. Hydraulic behavior conformed to dilation characteristics in the first stage, and permeability increased with increase of dilation. As the shear displacement progressed, flow rate became somewhat constant due to gouge production and offset of apertures. Hydraulic behavior under cyclic shear loading was also influenced by the degradation of asperities and gouge production. In addition. the relation between hydraulic aperture and mechanical aperture under compression and shear loading was investigated and compared.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.381-386
• /
• 2014

In order to investigate the effect of contact load, which is one of the fretting corrosion factors affecting the electric connector, a coupled fretting corrosion specimens were prepared using a tin-plated brass coupon with a thickness of $3{\mu}m$. Electric resistance of the contact was measured during the fretting corrosion test period. There was increase in resistance with fretting cycles. The change in resistance can be classified by 3 stages. The first stage exhibited low and stable resistance. Second stage showed steady increment of the resistance and third stage showed very high and intermittent resistance. The relationship between the failure cycle (Nf) and contact force (P) can be drawn as; It is possible to draw the prediction equation for the failure cycle of the electric connector corresponding to the very high and intermittent resistance under various environment conditions through the fretting tests under various conditions such as load, displacement, temperature.