• Title/Summary/Keyword: 좌초

Search Result 152, Processing Time 0.033 seconds

부산항 등부표 접촉사고 확률산출에 대한 연구

  • Sin, Dae-Un;Park, Yeong-Su;Guk, Seung-Gi;Lee, Myeong-Gi
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.05a
    • /
    • pp.304-305
    • /
    • 2018
  • 충돌확률은 선박 충돌, 좌초사고를 교통량 관측에 기초한 사고 발생건수와 수로의 지형적인 조건에 따른 기하확률로 정량화한 자료이다. 1970년대 Fujii와 Macduff의 연구를 시작으로 많은 연구기관에서 충돌확률을 제시하였지만, 우리나라 해역의 조건에 적합한 충돌, 좌초확률은 없는 실정이다. 이에 본 연구는 부산항 제5항로에서 등부표 접촉사고 발생건수를 바탕으로 진입항로, 직선항로, 변침항로를 구분하여 좌초발생확률($P_a$) 및 준사고(좌초)발생확률($P_c$)을 도출하였다. 사고 발생율이 높은 진입항로에서 좌초발생확률($P_a$) $2.26{\times}10^{-5}$, 준사고(좌초) 발생확률($P_c$) $2.30{\times}10^{-3}$으로 산출되어 타 항로보다 등부표 접촉사고 확률이 높은 것으로 분석되었다. 추후 각 해역별 충돌확률을 도출하여 선박 안전성 평가의 기준을 구하고자 한다.

  • PDF

실시간 위치기반 선박 좌초 위험도 모델 개발에 관한 연구

  • Song, Jae-Uk;Lee, Jeong-Jin;Jeong, Min;Lee, Jin-Seok;Park, Su-Ji
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2013.10a
    • /
    • pp.53-55
    • /
    • 2013
  • 우리나라의 최근 수년간 선박의 교통관련 사고(충돌, 좌초, 접촉)를 분석해 보면 가장 많이 일어나는 사고가 충돌이고, 그 다음으로 많이 발생하는 사고는 좌초이다. 그동안 충돌 사고에 관한 연구는 활발히 진행되었지만, 그에 반해 좌초의 사고 빈도가 높음에도 불구하고 많은 연구가 이루어지지 않았다. 본 연구에서는 선박이 아닌 제 3의 위치에서 실시간으로 좌초 위험도를 계산하는 모델을 연구하였다. 위험도를 수심, DCPA, TCPA를 이용하여 0~100의 값으로 산출하였으며, 이 연구의 최종 목표는 전자해도 상에 색상을 달리하여 해역 전체의 위험도를 표시하는 프로그램을 개발하는 것이다.

  • PDF

A Study on a Method to Reduce Marine Pollution Accidents through Tugboat Grounding - Focusing on an Experiment of Indicating the Location of Stranded Accidents on GPS Plotters - (예인선 좌초에 의한 해양오염사고 감소방안에 관한 연구 - GPS 플로터에 좌초사고 위치표시 실험을 중점으로 -)

  • Kim, Do-Hoon;Kang, Woo-Kyung
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.1
    • /
    • pp.29-37
    • /
    • 2021
  • In the event of a marine pollution accident, Korea, which is bordered by the sea on three sides, would suffer tremendous damage. According to an analysis of marine pollution accidents in Korea, most pollutants were small fishing boats and tugboats. In particular, urgent safety measures are required due to the high incidence of marine pollution accidents caused by stranded tugboats. This study aims to decrease secondary marine pollution accidents by preparing measures to prevent accidents by stranded tugboats, the main source of pollution accidents. To this end an experiment was conducted to mark 63 locations where stranded accidents have occurred on the GPS plotters of 61 tugboats operating in Boryeong sea area. Its effectiveness was then investigated. The result showed that there was no stranded accident by the subject ship during the 20-month experiment period. As a result of survey of the captains, 36 out of 40 respondents (90%) stated that the experiment was significantly helpful in ensuring safe navigation, thus confirming its effectiveness. Various measures were proposed to prevent stranded accidents, including providing information to manufacturers and users by marking the location of grounded accidents on GPS plotters and posting the location information of unknown reefs on the official website of institution Korea Hydrographic and Oceanographic Agency.

Analysis of Grounding Accidents in Small Fishing Vessels and Suggestions to Reduce Them (소형어선의 좌초사고 분석과 사고 저감을 위한 제언)

  • Chong, Dae-Yul
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.28 no.4
    • /
    • pp.533-541
    • /
    • 2022
  • An analysis of marine accidents that occurred in the last five years, revealed that 77.0 % of all grounding accidents and 66.1% of all marine casualties involved small vessels, which was a very high level relatively. The Mokpo Regional Maritime Safety Tribunal (Mokpo-KMST) inquired on 72 cases of marine accidents in 2021, of which 10 cases were grounding accidents. Furthermore, eight cases of grounding accidents occurred in small fishing vessels. This study analyzed eight cases of grounding accidents on small fishing vessels that inquired in the jurisdictional area of Mokpo-KMST in 2021. I found out that this grounding occurred in clear weather with good visibility (2-4 miles) and good sea conditions with a wave height of less than 1 meter. Furthermore, I found that the main causes of grounding were drowsy navigation due to fatigue, neglect of vigilance, neglect of checking ship's position, overconfidence in GPS plotter, and lack of understanding of chart symbols and tidal differences. To reduce grounding accidents of small fishing vessels, I suggested the following measures. First, crew members who have completed the able seafarer training course on bridge watchkeeping should assist to the master. Second, alarm systems to prevent drowsiness should be installed in the bridge. Third, the regulation should be prepared for the performance standards and updating GPS plotter. Finally, the skipper of small vessels should be trained periodically to be familiar with chart symbols and basic terrestrial navigation.

Structural Damage and Residual Strength of Ships in Grounding with a Forward Speed (전진형 좌초시 선박의 구조손상 및 잔류강도)

  • J.K. Paik;T.K. Lee
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.32 no.4
    • /
    • pp.73-86
    • /
    • 1995
  • In this paper, the mechanics of ships in grounding with a forward speed is analyzed. A raking damage estimate model in grounding of ships is proposed. The accuracy and applicability of the model are verified by a comparison of experimental results. The progressive collapse analysis of damaged gull sections under vertical bending moments is described by using the ALPS/ISUM computer code. The procedure is applied to grounding simulation of a double hull tanker with a transverseless system.

  • PDF

On the Grounding Damage of Ship Bottom Stiffened Platings(Part I: Experiment) (좌초시 선저보강판의 손상에 관한 연구(제1보: 실험))

  • Jeom-K. Paik;Myung-H. Hyun;Tak-K. Lee
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.31 no.1
    • /
    • pp.121-132
    • /
    • 1994
  • The aim of the present paper is to clarify the damage characteristics fur ship bottom stiffened platings in grounding. For this purpose, a series of tests are performed. A rigid wedge is quasi-statically pushed into the high tensile steel plates with two stiffeners. The aspect ratio of plates(a/B) is in the range from 1.0 to 2.5 and the thickness of plates is in the range from 3.4 to 7.0mm. Also other parameters, namely the shape of wedge tip, wedge angle and property/direction of stiffeners are varied. The test is carried out using the 100ton universal test machine. During the loading. both applied force and length of cutting(penetration) resulting in the grounding force-penetration response are measured.

  • PDF

Strength Analysis of Double Bottom Structures in Stranding by Idealized Structural Unit Method (이상화(理想化) 구조요소법(構造要素法)에 의한 좌초시(坐礁時) 이중저(二重底) 구조(構造)의 손상 및 강도(强度) 해석(解析))

  • Jeom-K. Paik;Chang-Y. Kim
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.28 no.1
    • /
    • pp.125-138
    • /
    • 1991
  • In this paper, an efficient method for the analysis of damage and strength of double bottom structure in stranding is described by using idealized structural unit method. Also a procedure for the determination of the effective double bottom height which is required in order to protect the inner-bottom plate is proposed. In the comparison between the present solution and he existing experimental and numerical results in stranding, its observed that the present method gives reasonable results requiring very shorts computiong times. The present method is then applied to the double bottom structure of 40K product oil carrier which is designed by the double skin design concept as an example. By performing the series of analysis, the influence of vertical member space, plate thickness and double bottom height on the energy absorption capacity of the double bottom structure in stranding is investigated. Also the minimum double bottom height with varying each design variable Is calculated based on the above result.

  • PDF