• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.2
• /
• pp.51-61
• /
• 2002

In this research, a numerical algorithm is developed for the response analysis of burined pipelines considering longitudinal permanent ground deformation(PGD) due to liquefaction induced lateral spreading. Buried pipelines and surrounding soil are modeled as continuous pipelines using the beam elements and a series of elasto-plastic springs represented for equivalent soil stiffness, respectively. Idealized various PGD patterns based on the observation of PGD are used as a loading configuration and the length of the lateral spread zone is considered as loading parameter. Numerical results are verified with other research results and efficient applicability of developed procedure is shown. Analyses are performed by varying different parameters such as PGD pattern, pipe diameter and pipe thickness. Through these procedures, relative influences of various parameters on the response of buried pipeline subject to longitudinal PGD are investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7870-7877
• /
• 2015

In the case of CWR (Continuous welded rail) located on the railway bridge, the CWR has additional axial force due to interaction of bridge and track. Therefore, the CWR tracks located on the bridge have to secure the safety of running train and CWR track through mitigating influence for interaction of bridge and track. The railway design guide in Korea (KR C-08080) provides a certain value for property of longitudinal friction behavior of rail fastening system that is major parameter of interaction behavior by applying European codes. However, in order to apply to domestic railway, it is necessary to review property characteristics of the rail fastening system in actual use. In this paper, the experiment for longitudinal friction behavior of rail fastener applied to concrete track on the railway bridge in Korea was carried out, and statistical characteristic for property of the rail fastener was analyzed from the result of the experiment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.499-509
• /
• 2016

In recent years, the use of underground spaces becomes more frequent and the demands for urban tunnels are rapidly increasing. The urban tunnels constructed in the ground with a shallow and soft cover might be deformed in various forms on the face, which would lead, the tunnels to behavior 3-dimensionally, which may have a great impact on the longitudinal load transfer. The tunnel face might deform in various forms depending on the construction method, overburden and the heterogeneity of the ground. And accordingly, the type and size of the distribution of the load transferred to the ground adjacent to the tunnel face as well as the form of the loosened ground may appear in various ways depending on the deformation form of the tunnel face. Therefore, in this study was conducted model tests by idealizing the deformation behavior of the tunnel face, that were constant deformation, the maximum deformation on the top and the maximum deformation on the bottom. And the test results were analyzed focusing on the deformation of the face and the longitudinal load transfer at the ground above the tunnel. As results, it turned out that the size and the distribution type of the load, which was transferred to the tunnel as well as the earth pressure on the face were affected by the deformation type of the face. The largest load was transferred to the tunnel when the deformation was in a constant form. Less load was transferred when the maximum deformation on the bottom, and the least load was transferred when the maximum deformation on the top. In addition, it turned out that, if the cover became more shallow, a longitudinal load transfer in the tunnel would limited to the region close to the face; however, if the cover became higher than a certain value, the area of the load transfer would become wider.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.475-475
• /
• 2023

직경 5 mm 이하의 미세플라스틱은 인류 활동에 의해 생산되어 하수처리장 처리수, 우수토구, 도로 분진 등 다양한 경로를 통해 하천에 유입되고 있다. 하천에 유입된 미세플라스틱은 하천흐름을 따라 하류로 이동하여 해양환경에까지 이른다. 미세플라스틱은 수체를 따라 이동할 뿐 아니라 수생생물에 의해 섭식되기도 하여 인체 위해성이 우려되는 상황이다. 특히 서울과 경기도의 주요 상수원인 팔당호는 북한강, 남한강, 경안천이 유입되어 형성되기 때문에 미세플라스틱의 유입에 따른 이송-분산 거동 평가가 중요한 영역이다. 본 연구에서는 준3차원 입자추적기법을 이용한 미세플라스틱 거동해석 모형, MPT-Q3D를 개발하였으며 팔당호 내 미세플라스틱의 거동 특성을 분석하였다. MPT-Q3D 모형은 2차원 흐름해석모형과 연계한 입자의 준3차원 거동해석을 위해 step-by-step computation method를 적용하였으며, 전단류에 의한 입자의 수평거동과 난류확산에 및 침강속도에 의한 연직거동 두 단계 계산과정에 따라 입자의 거동을 해석했다. 전단류는 2차원 흐름해석결과로부터 유속의 연직분포식을 적용하여 생성하였으며, 생성된 전단류에 의해 각 연직층 별 유속이 계산되고 𝚫t 이후 입자의 종, 횡 방향 이동거리를 계산한다. 또한 난류확산에 의한 무작위적 거동 계산을 위해 Gaussian 분포를 따른 난수 생성을 통해 무작위적 거동을 계산했다. 각 연직층에 위치한 미세플라스틱 입자의 종, 횡 방향 거동을 계산한 후 입자의 연직거동을 계산한다. 입자의 연직 위치는 난류확산과 침강속도에 따라 계산되며 침강속도는 미세플라스틱의 밀도 및 직경에 따라 결정된다. 현장 샘플링 결과에 따라 팔당호로 유입되는 미세플라스틱은 폴리스틸렌(PS), 폴리에틸렌(PE), 폴리에스테르(Polyester)가 있으므로, 세 종류의 미세플라스틱을 동시에 주입하여 팔당호 내 거동을 분석했다. 남한강, 북한강, 경안천의 유량 차이로 인해 팔당호로 유입되는 미세플라스틱은 대체로 남한강과 북한강의 흐름특성에 영향을 받았다. 경안천의 경우 유량이 낮아 팔당호로 유입되지 못하고 좌안을 따라 하류로 이동됐다. 남한강과 북한강에서 유입된 미세플라스틱은 주로 팔당호 내 소내섬을 거쳐 팔당댐 쪽으로 이동했다. 또한 팔당댐 인근에서는 PP, PE, Polyester 순으로 많은 양이 유입되는 결과가 나타났다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.3-12
• /
• 2005

The behaviors of the ground in crossed zone and the existing upper tunnel in shallow cover due to the excavation of new lower tunnel Rectangularly crossed to that was studied. Model tests were performed in the large scale test pit, the size was '$4.0m(width){\times}3.8m(height){\times}4.1m(length)$'. Test ground was constructed uniformly by sand in middle density. Results of the model tests show that earth pressure and settlement of the ground in crossed zone were redistributed due to the longitudinal arching effect by the excavation of lower tunnel. Upper tunnel blocks stress flow due to the longitudinal arching effect by excavation of lower tunnel.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.139-148
• /
• 2015

The purpose of this paper is to induce the ductile behavior of the UHPFRC member after the peak load by using the bundle of longitudinal reinforcing bar as a substitute for steel fiber. Experiments on the flexural behavior of the Ultra High Performance Concrete rectangular beam with the combination of the steel fiber and longitudinal reinforcing bar were carried out. The volume fractions of steel fiber are 0%, 0.7%, 1%, 1.5%, 2% and the reinforcement ratios of longitudinal reinforcing bar which induce the ductile behavior are 0.0036, 0.016, 0.028 and 0.036. 15 UHPC beams were made with the combination of these test factors. Not only steel fiber but also bundle of longitudinal reinforcing bar has the effect to induce ductile behavior of UHPC structural member. The combination of 0.7% volume fraction of steel fiber and 0.028 reinforcement ratio showed the most economic combination. The relationship of load-deflection, strain variation of the concrete and the crack pattern indicate the usefulness of the bundle of the longitudinal bar which has small diameter with close arrangement each other.

• Journal of Welding and Joining
• /
• v.6 no.1
• /
• pp.35-45
• /
• 1988

오-스테나이트계 스테인레스강에 대한 용접은 용접재료의 개발과 더불어 각종 산업계에 널리 이용되고 있으며 최근 Type 303 오-스테나이트계 스테인레스강 등은 free machining재로써 널리 응용되고 있다. 그러나 이 303계는 피삭성, 절삭성, 칩형성개선을 위한 특수원소(Se, S 등)의 첨가 때문에 용접성에 문제점을 제기하고 있다. 본 연구에서는 Type 303을 중심으로 AISI 304-316NG 및 347NG계의 오-스테나이트계 스테인레스강의 고온연성거동과 고온균열감수성(용접성)에 관한 연구에 대한 검토중 고온연성거동에 관하여 조사하였다. 고온연성평가는 Gleeble Simulator에 의하여 재료와 방향성에 따라 검토하였으며, 그 결과 모든 재료는 압연방향을 종방으로 시험하였을 때는 거의 유사한 고온연성을 나타내었으나 횡방향으로 시험하였을 때는 종방향에 비하여 연성저하를 나타내었다. 이와 같은 고온연성은 후속연구에서 검토될 고온균열 감수성과 밀접한 관련성에 의하여 용접성을 평가할 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.667-674
• /
• 2015

In this paper, shear behavior of concrete wide beam reinforced with plates with openings was evaluated. For this evaluation, evelen specimens were manufactured. One specimen was non-shear reinforced, five specimens were reinforced with steel plates and the other five specimens were reinforced GFRP plates. Shear strengths measured through experiments were compared with ones calculated from the equation provided by ACI 318. Longitudinal spacing of shear reinforcement, transverse spacing of shear reinforcement and shear reinforcement material were considered as variables. Test results showed that the shear strength increased as the transverse and longitudinal spacing of shear reinforcement became narrow. Also, regardless of material type of shear reinforcement, the shear capacity was similar when the amount of shear reinforcement was the same.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.48-53
• /
• 2003

최근 기존 암거구조물에 하수관로 등 추가적인 관로의 설치에 의해 암거 구조물이 손상을 입는 경우가 종종 발생되고 있으나, 현장여건상 이에 대한 구조적 안전성의 검토가 미비한 채 시공이 이루어지는 경우가 많다. 이에 본 연구에서는 기존 암거의 상단부에 흄관이 관통하였을 경우 block-out된 암거구조물의 구조적 거동을 검토하기 위하여, 암거구조물의 손상 인접부위의 종방향 및 횡방향 휨모멘트를 구조해석에 의해 산출하고, 이들 구조해석 결과에 의해 block-out된 암거의 손상 인접부위에 대한 구조안전성 검토를 수행하였다.(중략)

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.3
• /
• pp.185-193
• /
• 2002

In this paper, deformation behavior of shallow subway tunnel excavated in weathered soil and reinforcement effects of longitudinal support measures are investigated via three dimensional FDM analysis. Two excavation methods, half-face excavation and full-face excavation, are considered in simulation to study the influences of excavation methods on tunnel deformation behavior. In addition, the reinforcing effects of RPUM and fiberglass pipe are compared. Face extrusion, covergence, preconvergence, and sidewall displacement are investigated to analyze tunnel deformation behavior, and surface settlement is used to analyze the effects of excavation methods and longitudinal supports measures. The simulation results show that half-face excavation induces larger convergence, preconvergence, sidewall displacement, surface settlement than full-face excavation, while full-face excavation induces larger extrusion than half-face excavation. In addition, under same excavation method, all displacements are larger when RPUM is only used for longitudinal support than when RPUM is jointly used with fiberglass pipes.