• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.513-523
• /
• 1996

This study was a med at predicting running speed related to alignment factors of forest road, and recommending the improvement method of forest road construction using the running speed of vehicles. For these purposes, this study proceeds to select forest roads after reviewing the planning papers and maps, to measure the road alignment factors such as longitudinal gradient, width of roadway, radius of curve, length of curve, superelevation, and conditions of road surface on the subject forest road. It was found that the running speed of vehicle on forest road is mainly influenced by the conditions of road surface, radios of curve, compound gradient, length of curve, longitudinal gradient and so on. The average running speed of cargo truck showed lower value than that of the expected speed of 'Forest Road Construction Regulations and Rules', and the average running speed of loaded truck showed 70-85% of the speed of empty truck. According to the road conditions, the changes of running speed can be expressed mathematically in terms of the increment of radius of curve and longitudinal gradient. The results of the study on the running speed of vehicle subject to the alignment of forest roads make it possible for one to judge the quality of the existing and to be constructed forest roads, to select the structure of forest road to improve the running speed of vehicle on forest road.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.165-172
• /
• 2014

When a vehicle is running on the road, the surface conditions and environment of road by reason of insufficient road design standards is so greatly that have an effect on drivers. In particular, the road design of the past is conducted empirical and ideal judgment, but recently, the new technical development is attempted that three and four dimensional parameters is reconsidering and adjusting at the same time. In this study, we analyzed the vehicle behavior characteristics according to the change of driving speed and vertical grades on braking at the peak point of the frozen road by using a PC-crash program for traffic accident reconstruction. As a result, we were conformed the fact that the friction coefficient of road surface and the vehicle speed is affected by vehicle behavior characteristics for intersection vertical grades and were showed the feasibility of verification through a simulation in order to solve the problem of road design in advance.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.473-486
• /
• 2014

This study aims to review whether climbing lane installment is needed by analyzing the impact that standard trucks have on traffic according to vertical alignment at SMART highway, and if climbing lanes are required to propose truck speed change curves based on slope length. We used VISSIM simulation model to obtain the speed change of the standard truck on uphill roads. The standard truck on climbing lanes was set for 100kg/kW (170lb/hp) with the entry speeds set and analyzed by 90, 100, and 110 km/h considering the future speed limit of trucks. The results of the research show that under SMART highway circumstance, the 1 and 2% vertical alignment is not needed at the climbing lane but 3% vertical alignment is necessary. In order to install the climbing lane at 3% vertical alignment, the speed change curve of truck depending on slope length of 90, 100, and 110km/h of entry speed is proposed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.14-20
• /
• 2015

The Korea ministry of land, infrastructure and transport set the goal of cutting greenhouse gas emissions from the transport sector by 34.3% relative to the business as usual scenario by 2020. In order to achieve this goal, support is being given to education and information regarding eco-driving. As a practical measure, however, a vehicle control strategy for decreasing fuel consumptions and emissions is necessary. Therefore, this paper presents an optimized driving model in order to decrease fuel consumption. Scenarios were established by driving mode. The speed profile for each scenario applied to Comprehensive Modal Emission Model and then each fuel consumption was estimated. Scenarios and speed variation with the least fuel consumption were derived by comparing the fuel consumptions of scenarios. The optimized driving model was developed by the derived the results. The speed profiles of general driver were collected by field test. The speed profile of the developed model and the speed profile of general driver were compared and then fuel consumptions for each speed profile were analyzed. The fuel consumptions for optimized driving were decreased by an average of 11.8%.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.195-212
• /
• 1998

본 연구는 새로운 설계일관성 검토기법의 정립을 위하여 수행되었으며, 이를 위해 속도추정 모형을 개발하였다. 본 연구를 통해 개발된 모형은 차량의 주행속도에 가장 큰 영향을 미치는 주 요소를 고려한 장점을 지니고 있다. 즉 평면곡선에서는 운전자의 시각적 판단을 기초로 등판차량의 주행속도를 추정하였다. 또한 이러한 속도추정이 승용차뿐만 아니라 트럭의 경우로 나누어 이루어짐으로써, 차종별 고려가 가능하도록 하였다. 다음은 본 연구를 통해 이루어진 결과이다. 평면곡선에서는 승용차와 트럭의 속도가 같게 추정되었으며, 시거를 통해 산정된 추정속도는 곡선반경과 밀접한 관계를 갖는다. 종단선형에서 승용차의 속도는 구배의 영향을 받지 않으나, 트럭은 구배의 영향으로 속도가 감소한다. 이 때 트럭에 작용되는 가속도는 모두 세 종류로써, 첫째, crawl speed에 도달할 때까지 작용한 가속도$(a_1)$와 둘째, crawl speed 이후 작용한 가속도$(a_2)$ 그리고 셋째, 하향구배 주행시 작용된 가속도$(a_3)$로 구분된다. Watanatade가 제시한 것과 같이 평지에서 나타나는 평면곡선의 주행속도와 구배지에서의 속도를 단순 비교 함으로써, 작은 속도의 궤적을 따라 평지에서 나타나는 평면곡선의 주행속도와 구배지에서의 속도를 단순 비교함으로써, 작은 속도의 궤적을 따라 합성선형의 속도를 추정하는 것은 합성선형이 차량의 주행속도에 미치는 영향을 간과한 것으로 판단할 수 있다. 그러나 본 모형에서는 합성선형의 영향을 고려하여 승용차와 트럭의 주행속도를 추정함으로써, 보다 현실적으로 주행속도를 추정하였다. 본 연구의 결과는 도로의 설계일관성을 검토하는데 매우 유용한 도구가 될 것이며 향후 운전자의 희망속도 결정, 감속율의 산정, 교통류의 고려, 도로설계의 전산화 자료와 연결 등을 통해 보다 실용적인 결과를 산출할 수 있을 것이다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.267-273
• /
• 2011

The importance of networking capability is gaining more weight for enterprise business and high-speed Internet access with guaranteed security management is essential to companies. This paper presents a unified network security management solution to support high-speed Internet access, active security management, traffic classification and control. The presented system provides firewall, VPN, intrusion detection, contents filtering, traffic management, QoS management, and history log functions in unified manner implemented in a single appliance device located at the edge of enterprise networks. This will enable cost effective unified network security solution to companies.

• Journal of Korea Water Resources Association
• /
• v.35 no.1
• /
• pp.13-24
• /
• 2002

In a physically realistic but simplified manner, an attempt is made in this study to develop a predictive model for swash hydrodynamics across the shore due to the storm waves on an arbitrary beach profile. Date from the SUPERTANK laboratory Data Collection Project are used for the model development, in which experiments were designed to simulate dune erosion under storm conditions at a prototype scale. The model predicts variations of swash height, velocity and period across the beach face in a swash zone. In general, the model proves to be capable of predicting variations of swash height, velocity and period across the shore. Quantitatively better predictions for the swash parameters could be achieved by improving the prediction of the beach face elevation, ymax, where the significant swash height becomes zero.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.40-47
• /
• 2002

This paper analyzes the performance of an optical line termination system in ATM based Passive Optical Network(PON) using the operational analysis. We analyze it using system parameters such as utilization, throughput and routing frequency based on the buffer structure in each block of ATM-PON. Furthermore, we derive the mean response time and the visit ratio of each block, and then search the bottleneck block that hinders the system performance. We found that the 622Mbps 16x16 switching block is the bottleneck block for ATM-PON. In this bottleneck block, the loss probability increases rapidly when the cell arrival rate increases.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.153-154
• /
• 2019

본 논문에서는 사물인터넷(Internet of Things, IoT)에 적용되어 사용될 수 있는 다중 게이트웨이 환경에서 각 게이트웨이의 자원 상황에 따라 종단 노드를 클라우드 단으로 직접 트레이드하여 처리함으로서 게이트웨이의 자원 소모를 줄이고 높은 처리량을 요구하는 종단 노드를 빠르게 처리 가능한 기법을 제안한다. 본 논문에서는 해당 기법의 효율성 입증을 위하여 클라우드 컴퓨팅이라는 대규모 환경을 가정하여 실험을 진행하였으며, 해당 실험의 결과에 따르면 높은 처리량을 요구하는 종단 노드를 클라우드 단에 트레이드하여 직접 처리함으로서 클라우드 단 하부의 다중 게이트웨이의 자원 소모율 감소 및 데이터 처리 속도가 증대 되었음을 확인할 수 있다.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.109-125
• /
• 2004

In recent decades, microscopic simulation models have become powerful tools to analyze traffic flow on highways and to assist the investigation of level of service. The existing microscopic simulation models simulate an individual vehicle's speed based on a constant free-flow speed dominantly specified by users and driver's behavior models reflecting vehicle interactions, such as car following and lane changing. They set a single free-flow speed for a single vehicle on a given link and neglect to consider the effects of highway design elements to it in their internal simulation. Due to this, the existing models are limitted to provide with identical simulation results on both curved and tangent sections of highways. This paper presents a model developed to estimate the change of free-flow speeds based on highway design elements. Nine neural network models were trained based on the field data collected from seven different freeway curve sections and three different locations at each section to capture the percent changes of free-flow speeds: 100 m upstream of the point of curve (PC) and the middle of the curve. The model employing seven highway design elements as its input variables was selected as the best : radius of curve, length of curve, superelevation, the number of lanes, grade variations, and the approaching free-flow speed on 100 m upstream of PC. Tests showed that the free-flow speeds estimated by the proposed model were statistically identical to the ones from the field at 95% confidence level at each three different locations described above. The root mean square errors at the starting and the middle of curve section were 6.68 and 10.06, and the R-squares at these points were 0.77 and 0.65, respectively. It was concluded from the study that the proposed model would be one of the potential tools introducing the effects of highway design elements to free-flow speeds in simulation.