• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2883-2890
• /
• 2000

In this study, a Hardware-In-The-Loop-Simulation(HILS) system for developing a Electric-Power-Steering(EPS) system is designed. To test a EPS by HILS system, a mathematical vehicle model with a steering system model has been constructed. This mathematical model has been constructed. This mathematical model has been downloaded to the Digital-Signal-Processor(DSP) board. To realize the lateral force acting on the front wheel in a real car. the steering wheel angle sensor and vehicle velocity have been used for input signal. The force sensor has been used for a feedback signal. The full vehicle states could by simulated by the HILS system. Consequently, the HILS system could by used to analyze control-parameters of a EPS that contributes to the maneuverability and stability of a vehicle. At the same time, the HILS system can evaluate the whole performance of the vehicle-steering system. Also the HILS system could do test could not be executed in real vehicle. The HILs system will useful for developing the control logic for the EPS system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2365-2368
• /
• 2001

This paper describes a fuzzy steering controller for an autonomous mobile robot with MR sensor. Using the magnetic field($B_{x}$, $B_{y}$, $B_{z}$) obtained from the MR sensor, we designed fuzzy controller for driving on the road center. Fuzzy rule base was built to magnetic field($B_{x}$, $B_{y}$, $B_{z}$). To develop an autonomous mobile robot simulation program, we have done modeling MR sensor, dynamic model of mobile robot and coordinate transformation. A computer simulation of the robot (including mobile robot dynamics and steering) was used to verify the steering performance of the mobile robot controller using the fuzzy logic. Good results were obtained by computer simulation. So, we confirmed the robustness of the proposed fuzzy controller by computer simulation. Also, we know that proposed control algorithm was applied to real autonomous mobile robot.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.182-189
• /
• 1999

In this paper, we present an ultrasonic sensor based path planning method using fuzzy logic for obstacle avoidance of an intelligent vehicle in unknown environments. Generally, Robot navigation in unknown terrains is a very complex task difficult to control because of the great amount of imprecise and ambiguous sensor information that has to be considered. In this case, fuzzy logic can satisfactorily deal with such information in quite efficient manner. In this study, we propose two fuzzy logic controller which is composed of steering controller and velocity controller respectively. Our object is to develop a fuzzy controller that can enable a mobile robot to navigate from a start point to a goal point without collisions, in the least possible travel time. The ability and effectiveness for the proposed algorithm will be demonstrated by simulation and expeiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.972-975
• /
• 1999

Until now, all of the port goods are transported by container transporter driven manually but recently there are a lot of researches about unmanned vehicle driven automatically. In this paper, we present a design of the TDOF PID controller using a hybrid schematic algorithm to control steering system. We used the ES and SA algorithms to construct hybrid tuning algorithm. Then the computer simulation shows that our proposed controller has better Performances than the other one.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.13-19
• /
• 2020

This paper presents steering controller for unintended lane departure avoidance under crosswind using vehicle lateral disturbance estimation. Vehicles exposed to crosswind are more likely to deviate from lane, which can lead to accidents. To prevent this, a lateral disturbance estimator and steering controller for compensating disturbance have been proposed. The disturbance affecting lateral motion of the vehicle is estimated using Kalman filter, which is on the basis of the 2-DOF bicycle model and Electric Power Steering (EPS) module. A sliding mode controller is designed to avoid unintended the lane departure using the estimated disturbance. The controller is based on the 2-DOF bicycle model and the vision-based error dynamic model. A torque controller is used to provide appropriate assist torque to driver. The performance of proposed estimator and controller is evaluated via computer simulation using Matlab/Simulink.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.363-369
• /
• 1999

In these days, there are a lot of studies in the port automation, for example, unmanned container trasporter, unmanned gantry crain, and automatic terminal operation systems and so on. In terms of loading and unloading equipments. we can consider container transporter. This paper describes the automatic control for the UCT(unmanned container transporter), especially steering control systems. UCT is now operated on ECT port in Netherland and tested on PSA ports in Singapore. So we present a design on the controller using neural network PID(NNPID) controller to control the steering system and we use the neural network self-tuner to tune the PID parameters. The computer simulations show that our proposed controller has better performances than those of the other.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2025-2027
• /
• 2003

미끄럼방지 제동장치는 차량의 급제동 시 바퀴의 장김을 방지하여, 바퀴의 슬립을 최적으로 유지 시킴으로써 제동거리를 단축시키고, 운전자가 차량 조향성을 유지할 수 있게 만드는 차량 안정장치이다. 이 장치는 비행기의 착륙거리를 줄이기 위해 개발된 이래로, 철도 및 차량 등에도 널리 적용되고 있으며, 국내에서도 이미 승용차를 위주로 양산되고 있는 추세이다. 이러한 미끄럼방지 제동 장치는 공압 브레이크 장치를 사용하는 대형차량 분야에서는 아직 국내에서 적용된 사례가 없었으나, 지난 3 년간의 연구개발의 성과로 대형 버스에 적용 가능한 미끄럼방지 제동장치의 전자제어기가 개발 완료되었으며, 국제 규격을 바탕으로 국내 현실에 적합한 미끄럼방지 제동장치 장착 대형차량의 시험 규격을 정하여 이 규격에 의거 제동시험을 실시하고 개발 제어기의 성능을 평가하였다. 각 제동 시험은 $\mu$-Jump 제동시험 및 Split-$\mu$ 제동시험 등의 직진 주행 중 급제동시험, 급제동 중 차선변경 시험, 장애물 회피 제동시험 등을 포괄하며 국제적인 규격을 기준으로 정한 독자 규격을 만족하였다. 본 논문에서는 공압 브레이크를 장착한 대형차량의 미끄럼방지 제동장치의 제동성능평가 시험방법을 소개하고, 이 방법에 의해 성능평가 시스템 및 측정 시스템을 구성하여, 개발 전자제어기의 우수성을 확인하였으며, 그 측정결과의 일부를 제시하였다.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.240-249
• /
• 2013

This paper discusses the maneuvering control algorithm based on all-wheel independent driving and steering control techniques for special purpose 6WD/WS vehicles. The maneuvering control algorithms considering superior dynamic characteristics of high power in-wheel motors and independent steering system are designed to perform driving, steering, vehicle stability, and fault tolerant control. The maneuvering controller applies sliding and optimal control theories considering optimal torque distribution and friction circle related to the vertical tire force. The fault tolerant control algorithm is applied to obtain the similar maneuverability to that of the non-faulty vehicle. The simulations using the Matlab/Simulink dynamics model and experiments using HIL simulator mounting the real controllers with the designed control algorithms prove the improved performances in terms of vehicle stability and maneuverability.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.1-8
• /
• 2006

The Steer-By-Wire(SBW) system replaces complex mechanical linkages of the current steering system with electric motors, sensors, and electronic control units. However, the SBW system should guarantee its safety and reliability before commercialization, and therefore, a reliable and robust fault-tolerant technology has to be implemented. This paper proposes a fault-tolerant control algorithm for the SBW system. Based on careful analysis on propagation effects of sensor faults, a reliable fault-tolerant control strategy has been developed. The fault-tolerant controller consists of a fault detection part that monitors and detects faults in the steering wheel and road wheel sensors, and a reconfiguration part that switches to normal sensor signal based on fault detection information. It has been demonstrated by simulation that the proposed algorithm detects sensor faults accurately and enables reliable steering control under various dynamic fault situations.

• 대한의용생체공학회:의공학회지
• /
• 제7권1호
• /
• pp.59-66
• /
• 1986

개발된 초음파 섹터 B-스캐너 시제품에서 프론트 엔드 하드웨어는 초음파펄스의 송신 및 수신을 담당하는 부분으로서 변환자에 펄스를 인가하는 펄스발생기, 진폭이 미약한 애널로그 신호를 처리하는 수신회로 및 기계식 섹터 탐촉자를 구동하는 조향제어회로의 3부분으로 크게 나눌 수 있다. 본 논문에서는 위 3부분의 기능 및 설계에 관하여 기술한다. 완성된 프론트 엔드 하드웨어의 특징 가운데 중요한 몇가지만 살펴보면, 링다운 시간을 감소시키는 펄스발생기를 사용하여 축방향의 해상도를 증가시켰고 시가변이득 증폭기에 필요한 제어전압을 여러 형태로 만들 수 있으며 탐촉자내에 있는 감지기의 출력파형을 기준으로 본 초음파 진단장치의 모든 시스템에 공급될 레이트 펄스를 만들어 주는 것이라고 말할 수 있다.