• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.11
• /
• pp.6-12
• /
• 2010

A sigma-delta modulator based class-D audio amplifier is presented. Parallel digital input is serialized to two-bit output by a fourth-order digital sigma-delta noise shaper. The output of the digital sigma-delta noise shaper is applied to a fourth-order analog sigma-delta modulator whose three-level output drives power switches. The pulse density modulated (PDM) output of the power switches is low-pass filtered by an LC-filter. The PDM output of the power switches is fed back to the input of the analog sigma-delta modulator. The first integrator of the analog sigma-delta modulator is a hybrid of continuous-time (CT) and switched-capacitor (SC) integrator. While the sampled input is applied to SC path, the continuous-time feedback signal is applied to CT path to suppress the noise of the PDM output. The class-D audio amplifier is fabricated in a standard $0.13-{\mu}m$ CMOS process and operates for the signal bandwidth from 100-Hz to 20-kHz. With 4-${\Omega}$ load, the maximum output power is 18.3-mW. The total harmonic distortion plus noise and dynamic range are 0.035-% and 80-dB, respectively. The modulator consumes 457-uW from 1.2-V power supply.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.49-55
• /
• 1978

In order to get healthy seedling of rice suitable for rice transplanter, the growing characteristics of the seedling grown under different growing days and sowing densities were invesigated and the results obtained were summarized as follows; In the 20 days old seedling, the difference of growing state of seed ling and its characteristics between the two types of nursery bed was not found, but for the 30 days old seedling, both of the crop growth rate and the relative growth rate on the band-type nursery bed appeared higher than those on the mat-type nursery bed. And also, "the dry weight, the content of cardohydrate and the ratio of dry weight to plant height of the seedling grown on the band-type nursery bed were much higher than those on the mat-type nursery bed, however the amount of difference of seedling characteristics between two types of nursery bed was decreased for 40 days old seedling and leaf number was not increased. The amount of the seedling growth was increased with less density of sowing and for the difference between the higher and the less density, the difference getting bigger with the longer nursery days. The maximum density of sowing was approximately 200cc per nursery case on the band-type nursery bed and 250cc per nursery case on the mat-type nursery bed. It was seemed that the growing uniformity of the seedling grown on the mat-type nursery bed was better than that on the band- type nursery bed, As the coefficient of variation of the plant height and the leaf numbers of the seedling grown on the band- type nursery bed was higher than that on the mat-type nursery bed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.409-422
• /
• 2019

In this study, we carried out the 3D numerical simulation to investigate the hydraulic characteristics of Synchronous Edge wave known as the driving mechanism of beach cusp using the Tool Box called the ihFoam that has its roots on the OpenFoam. As a wave driver, RANS (Reynolds Averaged Navier-Stokes equation) and mass conservation equation are used. In doing so, we materialized short-crested waves known as the prerequisite for the formation of Synchronous Edge waves by generating two obliquely colliding Cnoidal waves. Numerical results show that as can be expected, flow velocity along the cross section where waves are focused are simulated to be much faster than the one along the cross section where waves are diverged. It is also shown that along the cross section where waves are focused, up-rush is moving much faster than its associated back-wash, but a duration period of up-rush is shortened, which complies the typical characteristics of nonlinear waves. On the other hand, due to the water-merging effect triggered by the redirected flow toward wave-diverging area at the pinacle of run-up, along the cross section where waves are diverged, offshore-ward velocity is larger than shore-ward velocity at the vicinity of shore-line, while at the very middle of shoaling process, the asymmetry of flow velocity leaned toward the shore is noticeably weakened. Considering that these flow characteristics can be found without exception in Synchronous Edge waves, the numerical simulation can be regarded to be successfully implemented. In doing so, new insight about how the boundary layer streaming occur are also developed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.4
• /
• pp.359-365
• /
• 1994

A oat (Avena sativa) cultivar, 'Guiri 16', was seeded on Oct. 9, Oct. 24, Nov. 9, Nov. 24, Dec. 9 of 1991 and 1992 to determine usefulness of growing degree days (GDD) for predicting growth duration and the optimum seeding date of oats for grains in Cheju province. The later the seeding, the greater the number of days to emergence but the fewer the number of days to heading and maturity. As seeding was delayed, accumulated GDD from seeding to emergence generally tended to decrease but was less subjective to a constant downward tend over seeding date than the number of days. Accumulated GDD from emergence ot heading decreased with delaying seeding and accumulated GDD from heading to maturity decreased as seeding was delayed up to Nov. 24. As seeding was delayed from Oct. 9 to Dec. 9, to Dec. 9, leaf area index at heading decreased from 7.7 to 5.1 and dry matter yield at maturity from 1920 to 823 kg /10a in 1992-1993, and culm length 120 to 89cm on an average of 1991-1992 and 1992-1993. While the number of grains per panicle and test weight were not affected by seeding date in 1991-1992 and 1992-1993, the number of panicles per m$^2$ and grain yield were decreased when oats were seeded earlier or later than Nov. 9. 1000 grain weight was not affected by seeding date in 1991-1992 but greatest at Nov. 9 seeding in 1992-1993. The results indicate that optimum seeding date of oats in Cheju province would be early November. November.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.97-103
• /
• 1986

In order to investigate the important morphological traits, and grain yield and its components on basis of regional variation of barley plant, Olbori was tested at 3 locations Suwon, Daejeon and Jinju for 3 years. It needed seven days around 15$^{\circ}C$ of daily average temperature for seed emergence. 104 to 144 days for Daejeon and 135 to 142 for Jinju after sowing are needed for productive tillers according to the different sowing dates, and % of productive tillers were ranged on 37-77%, showing higher value at the southern region. Young spike elongated slowly at early stage, and after floret differentiation it appeared rapid development with 1.05-1.95 mm elongating per day. Analysis of variance indicated that only number of kernels/spike showed significant differences among locations, but every traits related to grain yields revealed the significant differences among different sowing dates. Little differences between locations existed on grain yield but its large variation appeared between sowing dates, especially indicating more variation at northern regions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.78-85
• /
• 1987

In order for Paldanghomil (winter rye) to be investigated if its grain yield is able to be produced after clipping just before winter season for forage utilization this experiment was carried out under the four sowing dates of four locations in Korea (Chunchon, Suwon, Hwasung and Chungju). In rye clipping plot earlier sowing showed taller plant height, more number of tillers/㎡ and higher forage yield before winter season, indicating the highest forage yield (1803 kg/10a) in Chunchon by sowing of September II. Forage yield of rye before winter season was mainly influenced by plant height and number of tillers/㎡, showing more effect of plant height. Rye plants were more or less affected on winter damages, late heading and short culm by clipping before winter season. Analysis of variance indicated that only number of spikes/㎡ among grain yield components showed the high significance according to the clipping method, and that there showed little variation for other yield components due to the sowing date and clipping method. There showed more grain yield in non-clipping rather than that of clipping plot, indicating the difference of 46kg/10a. This was resulted from short culm and severe winter damages caused by clipping before winter season. Of the grain yield components, number of spikes/㎡ was greatly influenced for grain yield by analysis of stepwise regression. Therefore, grain yield of rye was able to produce after forage utilization before winter season due to the appropriate crop and soil managements, by resulting from the little variation in grain yield between clipping or non-clipping plots and from the higher grain yield by the early sowing.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.193-197
• /
• 2013

In this study, ultrasonic nonlinear characteristics in the heat-treated aluminum alloy have been evaluated. The nonlinearity of ultrasonic wave has been measured as the acoustic nonlinear parameter ${\beta}$, depending upon the amplitude ratio of the second-order harmonic and the fundamental frequency component of ultrasonic wave propagating through the materials. The parameter ${\beta}$ measurement has been carried out with the reflected signals from the back-wall of specimens at the same plane using the contact-type transducers. The heat-treatment, aging, has been achieved at $300^{\circ}C$ for various durations in the range of 1 to 50 hours. The tensile strength and elongation are obtained by the tensile test and then compared with the parameter ${\beta}$. There is a peak of the acoustic nonlinear parameter ${\beta}$ on 5 hours aging and the ${\beta}$ decreases thereafter, exhibiting closed relations with tensile strength and elongation. Also, the heat-treatment time showing peak in the parameter ${\beta}$ was identical to that showing severe change in the ${\sigma}-{\varepsilon}$ curve. These results suggest that the acoustic nonlinear parameter ${\beta}$ can be used for monitoring the strength variations with aging of aluminum alloys.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.505-511
• /
• 1994

Seeds of Rigitaeda pine tree(Pinus rigida${\times}$P. taeda) was primed with polyethylene glycol(PEG-6000) under different PEG concentrations, treatment period, and temperatures to test uniformity of germination. Coated seeds and PEG treated seeds were sown to compare germination, emergence, establishment, and seedling growth. The results obtained are summarized as follows : 1. As the concentration of PEG increased, as total germination percentage of pine tree was increased. Total germination percentage of pine tree seeds primed with PEG at 15 or $20^{\circ}C$ was better than the seeds treated at $10^{\circ}C$ compared to untreated seeds. 2. Germination rate was improved as primed period long and level of PEG concentration high. 3. Maximum germination rate was high with long PEG treatment period, and markedly improved when the seeds were primed at $20^{\circ}C$ 4. Priming with PEG at $20^{\circ}C$ for 12 days reduced time taken for germination. 5. Osmoconditioned seeds accelerated germination under drought condition with injurious effect of coated seeds by some chemicals. 6. There were much differences in establishment and dry matter production between drill and oversowing method, and primed seeds showed better performances than the coated seeds. Coating effects to seeds were better under drought soil condition rather than moderate moisture condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.215-218
• /
• 2012

We have carried out the experiment to investigate optimal drainage time of barley seeding synchronized with rice harvesting in paddy field. Number of emerged barley seedling on moist paddy field was less than that of common paddy field. It is very hard to plow using combine owing to long time to work on wet condition compared to drying condition of paddy field. According to the drainage time, growth and yield of barley were not significantly different. However, late drainage time decreased the spikes per $m^2$. Rice yield and 1,000 husked rice grain weight were not significant depending on drainage times at 15 days, 20 days and 25 days before barley seeding. The range of 1,000 husked rice grain weight was 21.7~22.2 g on different drainage conditions. In results, on considering of soil hardness and time of labor, the optimal contents of soil moisture was about 33%. This study reveals that drainage time at 20 days before barley seeding is proper to increase seedlings and yield.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.236-241
• /
• 2013

Introduction of rye living mulch in soybean production is important for labor-saving and reduction of herbicide usage for weeding by weed suppression and for soil conservation by mulching of rye. Soybean and rye were row-planted and broadcasted simultaneously at different planting times (May 15, May 25, June 5) and row widths (35 and 70 cm) in 2010, different soybean cultivars (Daepoong, Singi) and planting times (May 15 and June 1) in 2011, respectively, and investigated weed occurrence, early growth and yield of soybean. Acalypha australis, which is known to herbicide-resistant weed, could be controlled ecologically by rye living mulch. Occurrence of Acalypha australis was controlled effectively also by mixture of alachlor and linulon at no mulch in 2011. Early growth amount of soybean plant per area was increased by narrow row width (35 cm) at rye living mulch, which was helpful in the control of weeds, but grain yield of soybean with narrow row was decreased compared to conventional row width (70 cm) at the planting in early June. It is concluded that soybean planting as row width 70 cm in early June is proper at simultaneous planting with rye.