• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.54-63
• /
• 2013

In general, multiple hydraulic servo actuators are installed on one control surface of aero-dynamically highly loaded condition aircraft for redundancy management to satisfy flight control safety requirements. If motions of multiple actuators are not synchronized, control surface is deformed from its free stressed state. In result, force fight conditions are generated on each actuator due to restoration reaction force of deformed control surface. In addition, force fight is induced from severe initial rigging tolerance. Force fight condition of multiple actuators affects control accuracies and reduces operational life of actuators and control surface due to fatigue phenomenon. In this study, we designed controller using force feedback to reduce force fight of duplex servo actuation system.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.82-98
• /
• 1994

A mathematical model for the hydrodynamic forces acting on the ship manoeuvring in waves is formulated and a numerical method for the problem is developed. The motion of a ship, which manoeuvres in waves, may be thought to have two components; one is a high frequency component due to encounter waves, and the other is a low frequency component due to manoeuvring motion. So the method of two time scale expansion is used to divide linear boundary value problem. For the effects of waves on the manoeuvring motion of a ship, only the second order drift forces are considered. The integral equation for the velocity potential is solved by 3 dimensional panel method and hydrodynamic forces are calculated by direct integral method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.17-20
• /
• 1991

금형의 제작이 쉽고 작은 힘으로 소재 가공을 할 수 있는 공정중의 하나가 원추형금형을 이용한 압출이다. 원추형 금형 압출은 현장에서 많이 사용되고 있으며 이에 대한 해석도 많이 이뤄졌었다. 그러나 정상상태의 해석이 대부분이었고 비정상상태 열간해석은 거의 이뤄지지않았다.(중략)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.1
• /
• pp.57-62
• /
• 2009

In order to investigate the hydrodynamic interaction between the tug-barge and bank or ship which is crossing to the opposite direction, the towing simulations of tug-barge transportation were performed. Heading of barge, yaw moment and lateral force of tug boat were obtained by this simulation. The characteristics of results were analyzed and the safety towing method for tug-barge operation was proposed. In order to reduce the slewing motion of barge for safe towing operation, the speed of tug boat should be kept slow ahead state with shortened towing line as length of barge within the limits of the possible.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.426-426
• /
• 2006

선박이 천 흘수 및 수로를 운항하는 경우 바닥과 벽면의 영향으로 인해 선체침하 및 비대칭적인 힘이 선체 주위에 발생하여 바닥이나 다른 선박 혹은 수로의 벽에 충돌하는 현상이 발생한다. 특히, 수로가 많은 유럽이나 북미를 운항하는 해운회사와 항해사들은 선박의 충돌을 방지하기 위해서 중요한 문제로 다루고 있다. 따라서, 본 연구에서는 선박의 안전한 항해를 위해 수치해석을 이용하여 선박과 벽면 사이에 발생하는 유체역학적 힘, 즉 Sway force와 Yaw Moment를 정성적으로 추정하고자 하였다. 천 흘수 유동 해석용 프로그램을 작성하였으며, 검증을 위해서 Wigley 선형에 적용하여 h/T별로 계산을 수행하여 시험결과와 비교하였다. 그리고, 벽면효과를 해석 할 수 있는 프로그램을 작성하여 실적선인 원유운반선 2척에 대하여 3가지 파라메터, 즉 선속, 수심 그리고 선박과 벽면 사이 거리의 변화에 따른 다양한 계산을 수행하였다. 계산된 결과는 시험결과 및 기 발표된 수치해석 결과와 비교하였다. 기 발표된 논문에서는 시험결과와 계산결과가 상이한 결론을 보여 주었는데, 그 이유는 수치해석에 있어서 자유표면 문제를 선형화된 자유표면 조건식을 사용한 부분을 가장 큰 이유로 언급하였다. 하지만, 본 연구의 결과는 Sway force와 Yaw Moment가 기 발표된 논문의 시험결과와 정성적으로 일치함을 보여 주었다. 본 연구를 통해 수치해석 방법으로 선박에 작용하는 비대칭 유동에 대한 유체역학적인 힘을 정성적으로 추정할 수 있었고, 제한된 수로에서 선박의 조종성 예측 및 수로 설계시 유용한 정보를 제공할 수 있을 것이라고 판단되어 진다.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.613-618
• /
• 2012

For the tug-barge simulation, captive model test(Horizontal Planar Motion Mechanism) of the barge model is carried out. From the result of HPMM test, a resistance coefficient, maneuvering coefficients of the barge are obtained. A mathmatical model of the barge is validated by turning simulations with different angle of towing line applied a simple towing line model and the tactical diameter compared to sea trial data. As a result, the tactical diameter of the barge is smaller as the angle of towing line is bigger. The tactical diameter from simulations is smaller than that from sea trial data, may be caused by increased displacement of the barge.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.10
• /
• pp.2501-2513
• /
• 1994

In this paper, a compact, light-weight, universal, spherical 3-degree-of-freedom, parallel-structured manual controller with high reflecting-force capability is implemented. First, the position analysis, kinematic modeling and analysis, force reflecting transformation, and applied force control schemes for a parallel structured 3 degree-of-freedom spherical system have been described. Then, a brief description of the system integration, its actual implementation hardware, and its preliminary analysis results are presented. The implemented parallel 3 degree-of-freedom spherical module is equipped with high gear-ratio reducers, and the friction due to the reducers is minimized by employing a force control algorithm, which results in a "power steering" effect for enhanced smoothness and transparency (for compactness and reduced weight).d weight).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1624-1626
• /
• 2013

햅틱 기반 로봇 원격제어를 위해서는 힘 반영을 인지할 수 있어야 한다. 원격조종에서는 데이터 통신과 처리에 소요되는 시간에 따른 지연이 발생하는데, 이 시간 지연은 로봇의 충돌과 제어기-로봇간의 힘 반영 부조화를 초래할 수 있다. 다수의 로봇이 협업을 하는 구조로 원격제어 시스템을 개발하기 위해서는 다수의 오퍼레이터와 다수의 로봇이 원활한 기능 분담을 수행할 수 있어야하는데, 본 논문에서는 원격지 로봇들의 협업을 수행할 수 있는 햅틱 기반 원격제어 시스템 구축 방법에 대하여 기술한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.4
• /
• pp.170-176
• /
• 2020

In this study, the lift, drag and moments of the rudder that influences on the maneuvering ships directly has been investigated using CFD(Computational Fluid Dynamics). One of typical ship rudders effecting on the forces and moments is the bow rudders during maneuvering on the sea. Thus, the forces and moments should be investigated for the bow of ship rudder. Among the IFS bow rudder series, the balance IFS 54 BR 15 is used for study. As a turbulent model, standard k-epsilon is applied to this study. The hydrodynamic of the bow rudder, especially lift, drag and moment coefficients are calculated for the different angles of attack. The angles of attack between water flow and rudder are presented in cases including 0°, 5°, 10°, 15°, 20°, 25°, 30° and 35°. The results of calculation for those influences on maneuvering performance of ships are compared with the relevant results of the previous experimental studies.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.161-169
• /
• 1997

It is known that tire plays an important role to the dynamic performances of a vehicle such as noise, vibration, ride and handling. Therefore, force and moment measurements have been a part of the traditional tire engineering process. In this paper, a computational analysis technique has been explored. A FE model is made to simulate inflation, vertical load due to the vehicle weight, and the slow rolling of a radial tire. A rigid surface with Coulomb friction is included in the model to simulate the slow rolling contact. The tire slip during the in-plane motion of the rigid surface is calculated. Results are presented for both lateral and vertical loads, as well as straight ahead free rolling. The calculated and measured tire slips are in good correlation. A Study on slow Rolling Tire for perdiction of tire Forces and Moments.