• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.361-361
• /
• 2013

비냉각 적외선 검출소자는 빛이 전혀 없는 환경에서도 사물을 감지하는 열상장비의 핵심소자이다. 마이크로볼로미터 적외선 검출기는 상온에서 동작하며, 온도안정화를 위해 TEC를 장착하여 진공패키지로 조립된다. 패키지는 진공을 유지할 수 있도록 일반적으로 메탈로 제작되며, 단가 감소 및 생산성 증대를 위해 wafer level packaging 방법을 이용한다. 마이크로볼로미터의 특성은 패키지의 진공 변화에 매우 민감하다. 센서의 감도를 증가시키기 위해서는 진공환경을 유지해야 한다. 볼로미터 소자의 특성은 상압에서 열전도는 기판과 멤브레인 사이의 에어갭을 통해 열손실을 야기하므로 센서의 반응도가 현저히 줄어든다. 에어갭이 1 um 정도 되더라도 그 사이에 존재하는 열전도가 가능하므로 진공을 유지하여 열고립 상태를 증대시킬 수 있다. 이에 본 연구에서는 소자의 동작시 압력, 즉 진공도가 볼로미터 소자의 반응도 특성에 미치는 영향을 조사하였다. 마이크로볼로미터 소자는 $2{\times}8$ 어레이 형태로 제작하였으며, metal pad를 각 단위셀에 배치하였으며, 공통전극으로 한 개의 metal pad를 넣어 설계하였다. 흡수체로써 VOx를 사용하였으며, 열 고립구조를 위해 2.5 um 공명 흡수층의 floating 구조로 멤브레인을 형성하였다. 진공패키지는 메탈패키지를 제작하여 볼로미터 칩을 TEC 위에 장착하였으며, 신호의 감지를 위해 가변저항을 매칭시켰다. 반응도는 신호 대 잡음 값을 획득하여 소자에 도달하는 적외선 에너지에 대해 반응하는 값을 계산에 의해 얻어내는 것이다. 픽셀 크기는 $50{\times}50$ um이며, 패키지 조립 공정 후 온도변화에 따른 저항 측정을 통해 TCR 값을 얻었다. 이때 TCR은 약 -2.5%/K으로 나타났다. $2{\times}8$의 4개 단위소자에 대해 측정한 값은 균일하게 TCR 값이 나타났다. 광반응 특성은 볼로미터 단위소자에 대해서 먼저 고진공(5e-6 torr) 하에서 측정하였으며, 반응도는 25,000 V/W의 값을 나타내었고, 탐지도는 약 2e+8 $cmHz_{1/2}$/W로 나타났다. 패키지의 압력 조절을 위해 TMP 및 로터리 펌프를 이용하여 100 torr에서 1e-4 torr의 범위에서 압력조절 밸브를 이용하여 질소가스의 압력으로 진공도를 변화시켰다. 적외선 반응신호는 압력이 증가함에 따라 감소하였으며, 2e-1 torr의 압력에서 신호의 크기가 감소하기 시작하여 5 torr에서 반응도의 1/2 값을 나타냄을 알 수 있었다. 30 torr 이상에서는 신호가 잡음값 과거의 동일하여 신호대 잡음비가 1로 나타남을 알 수 있었다. 또한 진공도 변화에 대해, 흑체온도에 따른 반응도 및 탐지도의 특성을 조사한 결과를 발표한다. 반응도의 증가를 위해 진공도는 진공도는 1e-2 torr 이하의 압력을 유지해야 함을 본 실험을 통해 알 수 있었다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.3
• /
• pp.273-278
• /
• 2012

Purpose: Average of the maximum accommodation amplitude of myopia in different generation, early 20's and early 40's were compared according to gender, degree of myopia. Methods: Maximum amplitude of accommodation for each 100 patients of early 20's and 40's were measured with push-up method. Maximum amplitude of accommodation expectations based on Hofstetter formula were classified into three groups of under, normal and excess. Results: The average of amplitude of accommodation was 9.77~11.64 D $(10.77{\pm}2.49D)$ in early 20's and 4.67~6.21 D $(5.34{\pm}1.28D)$ in early 40's. In early 20's, minimum expectations of amplitude of accommodation for under, normal and excess groups were 20%, 75%, and 5%, repectively. In early 40's, excess and under groups were 5% and 18%, repectively, but there was no excess group. Conclusions: According to increasing age, amplitude of accommodation of both age groups showed decreased, and no significant difference was found in degree of myopia with gender. Difference between mean of expected accommodation amplitude and maximum of accommodation amplitude was compared, and it was found that maximum of accommodation amplitude of 20's was smaller than mean of expected accommodation. From the result, it was expected that people in early 20's who have more working times might have festinated accommodative insufficiency than 40's.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.561-566
• /
• 2013

This study aims to develop the control system of vehicle height and apply this developed system to common passenger car. The vibration characteristics to affect ride comfort are examined through driving tests. The hydraulic control system of vehicle height is designed by Macpherson type used most commonly at current passenger car. Tests in this study are operated by the vehicle installed with genuine suspension system of Macpherson type, tuning suspension system and hydraulic control system of vehicle height. As vibration characteristics transmitted to vehicle become random types values of PSD(Power Spectrum Density) are compared.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.321-330
• /
• 2011

This study focuses on the moderating effect of sex role on the relationship between perceived values on the reward program of tele-communication firms and customer satisfaction. To test moderating effect, Difference test for distinct parameters in Amos 18.0 program was used. Results show that both kind of perceived values(utilitarian value and hedonic value) have a significant effect on customer satisfaction. And the moderating effect of sex variable was verified. For male, hedonic value has influenced on the customer satisfaction more than utilitarian value. And for female, reversely, utilitarian value has influenced on the customer satisfaction more than female value.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.05a
• /
• pp.77-82
• /
• 1998

현재 온실 난방에 주로 이용되고 있는 난방기는 대부분이 화석에너지를 연료로 사용하고 있다. 따라서 생산비의 가중이 불가피하며, 또한 연소 과정에서 발생하는 배기 가스로 인하여 환경 오염이 문제시되고 있다. 따라서 태양에너지를 보다 더 적극적으로 활용할 수 있는 기술의 개발이 요구된다. 태양에너지를 시설 농업에 적극적으로 이용하기 위해서는 주간에 밀도가 낮은 태양에너지를 고밀도로 축열하여 기온이 급강하하는 야간의 보온에 활용하여야 한다. 주간의 온실내 잉여 태양에너지를 축열할수 있는 상변화 온도 3$0^{\circ}C$ 수준의 잠열축열재를 개발하기 위하여 수행한 본 연구의 결과를 요약하면 다음과 같다. 1. SCD에 Borax를 0.0~5.0wt% 첨가하여 과냉도를 25.$0^{\circ}C$에서 $1.5^{\circ}C$ 이하로 조절하였으며, Borax의 적정 함량은 3.0wt%였다. 2. SCD에 Carbopol을 0.0~3.0wt% 첨가하여 상분리량을 70.0%에서 0.0%로 조절하였으며, Carbopol의 적정 함량은 1.5wt%였다.3. 축열재 내구성 검증을 위하여 0~1,500회의 상변화 사이클을 수행하였다. 이때 상변화 온도의 변화량이 $\pm$1.$0^{\circ}C$ 이하, 잠열량 변화가 $\pm$2.0 kacl/kg 이하로서 안정된 값을 보였다. 이상의 결과로 볼 때 축열재의 수명을 10년까지는 보장할 수 있는 것으로 판단되었다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.3
• /
• pp.231-236
• /
• 2015

In this study, we propose a non-contact circular eddy current load brake using permanent magnet that can be applied to the rehabilitation exercise equipment. The circular eddy current load brake is manufactured and is evaluated for performance. This has the torque value of 49% compared to a "ㄷ" type eddy current load brake having a fixed load. And we confirmed that load is regulated due to the conductivity and air gap. Proposed load brake is adjustable according to the user's condition and can be applied to the equipment having advantages such as miniaturization and cost reduction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1319-1324
• /
• 2007

Accurately controlling the shape of the read/write head structure is critical in the performance of a modem hard disk drive. The sliders investigated are composed of alumina and titanium carbide(AITiC) and act as an air bearing when passing over the disks. Controlling the curvature of the slider is of primary importance. A laser scribing system that produces curvature by inducing residual stress into the slider can be utilized. Predicting the curvature created by a pattern of scribes is of great importance to increase the control over the sliders' shape. The force system that produces stresses similar to the laser scribing is applied to the finite element analysis model. The curvatures created by the force system are calibrated to experimental measurements.

• Journal of radiological science and technology
• /
• v.35 no.3
• /
• pp.255-263
• /
• 2012

The aim of this study was to evaluate the patient specific quality assurance (QA) results of intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) through the AAPM Task Group Report 119. Using the treatment planning system, both IMRT and VMAT treatment plans were established. The absolute dose and relative dose for the target and OAR were measured by using an ion chamber and the bi-planar diode array, respectively. The plan evaluation was used by the Dose volume histogram (DVH) and the dose verification was implemented by compare the measured value with the calculated value. For the evaluation of plan, in case of prostate, both IMRT and VMAT were closed the goal of target and OARs. In case of H&N and Multi-target, IMRT was not reached the goal of target, but VMAT was reached the goal of target and OARs. In case of C-shape(easy), both were reached the goal of target and OARs. In case of C-shape(hard), both were reached the goal of target but not reached the goal of OARs. For the evaluation of absolute dose, in case of IMRT, the mean of relative error (%) between measured and calculated value was $1.24{\pm}2.06%$ and $1.4{\pm}2.9%$ for target and OAR, respectively. The confidence limits were 3.65% and 4.39% for target and OAR, respectively. In case of VMAT the mean of relative error was $2.06{\pm}0.64%$ and $2.21{\pm}0.74%$ for target and OAR, respectively. The confidence limits were 4.09% and 3.04% for target and OAR, respectively. For the evaluation of relative dose, in case of IMRT, the average percentage of passing gamma criteria (3mm/3%) were $98.3{\pm}1.5%$ and the confidence limits were 3.78%. In case of VMAT, the average percentage were $98.2{\pm}1.1%$ and the confidence limits were 3.95%. We performed IMRT and VMAT patient specific QA using TG-119 based procedure, all analyzed results were satisfied with acceptance criteria based on TG-119. So, the IMRT and VMAT of our institution was confirmed the accuracy.

• Clean Technology
• /
• v.23 no.1
• /
• pp.42-53
• /
• 2017

Numerical analysis was done to evaluate the fluid distribution inside of the mixing quencher to increase the reaction efficiency of the aqueous hydrogen peroxide solution in the scrubbing column which is used for simultaneous desulfurization and denitrification. Effective injection of the aqueous hydrogen peroxide ($H_2O_2$) solution in the mixing quencher has major effects for improving the reaction efficiency in the scrubbing column by enhancing the mixing of the aqueous $H_2O_2$ solution with the exhaust gas. The current study is to optimize the array of nozzles and the spray angles of the aqueous $H_2O_2$ solution in the mixing quencher by using the computational method. Main concerns of the analysis are how to enhance the uniformity of the $H_2O_2$ concentration distribution in the internal flow. Numerical analysis was done to check the distribution of the internal flow in the mixing quencher in terms of RMS values of the $H_2O_2$ concentration at the end of quencher. The concentration distribution of $H_2O_2$ at the end of is evaluated with respect to the different array of the nozzle pipes and the nozzle tip angles, and we also analyzed the turbulence formation and fluid mixing in the zone. The effect of the spray angle was evaluated with respect to the mixing efficiency in different flow directions. The optimized mixing quencher had the nozzle array at location of 0.3 m from the inlet duct surface and the spray angle is $15^{\circ}$ with the co-current flow. The RMS value of the $H_2O_2$ concentration at the end of the mixing quencher was 12.4%.

• Korean small business review
• /
• v.41 no.4
• /
• pp.65-86
• /
• 2019

This study empirically analyzed how the elements of entrepreneurship and the fear of entrepreneurial failure influence entrepreneurial intention with each other in a situation that encourages startups. In particular, the moderating effect of fear of entrepreneurial failure was verified by dividing the fear of entrepreneurial failure into three sub-variables: fear of financial loss, fear of psychological loss, and fear of career loss. As a result, it was found that proactiveness and risk-taking had a positive effect on entrepreneurial intention, but innovativeness did not. Fear of entrepreneurial failure(all of sub-variables) was found to have no significantly moderating effect on the relationship between entrepreneurship and entrepreneurial intention. Therefore it seemed to have a negative effect as a independent variable. However, considering the regression coefficient(β) is positive or negative depending on the interaction terms of the sub-variables of fear of entrepreneurial failure and the entrepreneurship, it could be inferred that the moderating effect could be positive or negative. Based on this research results, a sophisticated entrepreneurship education program to inspire entrepreneurship and lower the fear of failure is needed in order to promote startups. And at the same time, a social safety net construction plan to reduce the fear of entrepreneurial failure needs to be prepared.