• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.35-44
• /
• 2002

In this paper, the analytic studies on the wave control performance of moored pontoon-type floating breakwater are presented. A two-dimensional eigenfunction expansion method is adopted to study the motion responses and the transmission coefficients of pontoon-type floating breakwater in beam waves. The stiffness coefficients of mooring line are idealized as linear elastic spring. Comparison of the analytical results with a numerical results (FEM) shows good agreement over a wide range of frequencies. The performance of mooed pontoon-type floating breakwater is tested with various design parameters such as sectional geometry, mooring line characteristics and wave frequencies. It is found that the properly designed floating breakwater can be an effective wave control structure.

• Journal of Korean Society on Water Environment
• /
• v.29 no.1
• /
• pp.127-137
• /
• 2013

Reuse of wastewater will intensify in the coming decades due to water shortage, the change of climatic conditions, the need for industrial and agricultural use and the necessity of improving health and environmental conditions for the growing population. This paper considers (a) the status and trends of wastewater reuse and reclamation in the world, (b) case studies of wastewater reuse projects, (c) analysis of technology level, (d) forecast of global market, and (e) the future views and directions in development of wastewater reuse technologies. Based on the available documented literature, this paper provides a review assessment of the current status of the wastewater treatment processes including potential applications for reuse. Key challenges for both wastewater treatment and reuse are also discussed in the paper and include recommendations, e.g. cost, effluent water quality, energy use and technical solutions, for future developments.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.6
• /
• pp.586-595
• /
• 2007

The analytic solution of wave scattering of monochromatic waves on a pile breakwater by an eigenfunction expansion method is extended to the case of directional irregular waves. The scattering wave spectrum and the force spectrum can be expressed from the reflection coefficient, transmission coefficient and the wave forces obtained from changing frequencies and incident angles in monochromatic waves. By numerical integration of 2-dimensional spectrum which is function of frequencies and incident angles, the representative values for the scattered waves and wave forces are obtained and the dependence of the transmission coefficients and wave forces on the directional distribution function, the principal wave direction, the submergence depth, and porosity is analyzed.

• Atmosphere
• /
• v.21 no.2
• /
• pp.151-162
• /
• 2011

One-layer solar radiation(GWNU; Gangneung-Wonju National University) model is developed in order to resolve the lack of vertical observations and fast calculation with high resolution. GWNU model is based on IQBAL(Iqbal, 1983) and NREL(National Renewable Energy Laboratory) methods and corrected by precise multi-layer LBL(Line-by-line) model. Input data were used 42 atmospheric profiles from Garand et al.(2001) for calculation of global radiation by the Multi-layer and one-layer solar radiation models. GWNU model has error of about -0.10% compared with LBL model while IQBAL and NREL models have errors of about -3.92 and -2.57%, respectively. Global solar radiation was calculated by corrected GWNU solar model with satellites(MODIS, OMI and MTSAT-1R), RDPS model prediction data in Korea peninsula in 2009, and the results were compared to surface solar radiation observed by 22 KMA solar sites. All models have correlation($R^2$) of 0.91 with the observed hourly solar radiation, and root mean square errors of IQBAL, NREL and GWNU models are 69.16, 69.74 and $67.53W/m^2$, respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.5-8
• /
• 2007

Selection of proper root barrier as destination part of greening is very important in Root penetration resistance plan. To select proper root barrier, it need to understand composition of greening part, size, kind of plant, connection with waterproofing layer. In this point of view, we have establish greening on the roof or concrete structure, not been understand the structural mechanism. It means that we misunderstood about purpose of greening and using it. So, chosen materials and construction method was not proper for greening, it caused water leakage and decrease performance of concrete structure. Therefore, we examine the practical use of copper sheet considering environmental condition for green roof. Watertightness by water of greening part, root penetration resistance test by root penetration, bacteria resistance by must or bacteria in soil, chemical resistance by rain and chemical agent of fertilizer, and load resistance by soil depth, sire of plant. These suggested test methods could be referred as guideline to test in green roof system because of not exist any performance appraisal guideline or standard. Consequently, it should be analysis as technical and institutional subdividing test methods and it need to study constantly as varied angles.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.151-154
• /
• 2007

To build up the green roofs, it must not adverse effect to durability and structural safety. That is conducted by safety system which consist of waterproofing to form basically, root barrier to protect the waterproofing. The reason why root barrier form is to protect the penetration force of root growth and the root could penetrate concrete surface, move inward so far. It may cause shorten the life span on concrete structure. For this problem, government constantly demand the solution to form the root barrier for waterproofing and concrete structure before the building is service. However, the technical action is not fully prepared. Therefore, in this study, we would like to suggest the workability and suitability of the copper plate to solve not only the side of waterproofing but also root barrier for green roof system and exhibit the mechanism for root penetration resistance and corrosion resistance.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.87-93
• /
• 1993

The motion response of a ship moored in a rectangular harbor excited by long waves has been studied theoretically and experimentally. Experiments are performed in a shallow basin. A ship model is set moored by soft springs at various positions in a model harbor subjected to regular waves with period ranging from 2 to 3 seconds. Wave and ship responses are measured and compared with theory. It is found that theoretical results agree qualitatively with experimental results. The main source of quantitative discrepancies is presumably due to real fluid effects such as separation at the harbor entrance and friction on harbor boundaries.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.55-60
• /
• 1992

A study has been made on the hydrodynamic forces on and the motion response of a sliding block in a bay within the framework of linear potential theory. To simplify the problem, following assumptions are made : The configuration of the bay is a long channel with narrow width, constant depth and straight coastline. Incident waves are long compared to the depth. We applied matched asymptotic expansion techniques. The flued domain is subdivided into three regions ; ocean, bay entrance, bay regions. Boundary-vague problems are solved first in each region. Then unknown coefficients are determined by matching individual solutions at the intermediate region between two neighboring legions. It is found that the motion of the block is greatly amplified at the resonant frequencies, in particular at the quarter wavelength mode. We examined the mechanism of negative added mass, which results from the localized hydrodynamic resonance.

• Elastomers and Composites
• /
• v.43 no.2
• /
• pp.124-132
• /
• 2008

Thermal and mechanical properties of flexible polyurethane foam modified by urushiol and cardanol which have been known to be antibiotic were investigated. It was observed from FT-IR spectra analysis that the urushiol reacted with isocyanate was participated in synthesis of polyurethane. It was also seen that the modification using urushiol and cardanol made the PU more thermally stable without deterioration of mechanical properties. The modified PU foams showed increased antibacterial properties compared with neat PU foam.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.67-68
• /
• 2016

본 연구는 매해 가트너에서 발표하는 'Emerging Technology'들 중 최근 5년간의 하이프 기술들의 포지셔닝을 기준으로 주요 국가의 연구 문헌과 특허 정보를 이용하여 국가별 기술 경쟁력 평가 지표에 대한 다면적 분석 방법을 제안한다. 급변하는 IT 기술 환경에서 미래 산업을 선도하기 위해서는 국가 R&D 기획에 있어 더욱 면밀하고 창의적인 방안들의 연구가 필요하며, 특히 다양한 산업 분야 중 급속한 변화를 보여주는 ICT 분야에 있어서는 이를 뒷받침할 고도의 R&D 투자방향을 예측할 수 있어야 한다. 이를 위해 본 연구는 많은 방법들 중 세계 기술 성숙도를 다루는 가트너 하이프 사이클과 연구 개발 투자가 집중되는 특허 정보 다면적 요소들을 통합 분석한 후, 국가별 기술 경쟁력의 평가 지표를 선정하였고, 이를 판단할 수 있는 기준으로 시장성, 잠재성, 확장성, 감소성을 제시하였다. 그 결과 가트너 하이프 사이클 기술들의 포지셔닝의 움직임과 다면적 분석 결과 변화가 유사하게 나타났다. 이에 따라 본 연구를 통해 ICT 기술 변화와 경쟁력 등을 직관적으로 파악할 수 있었고, 국가 R&D 투자방향을 설정하는데 도움을 줄 수 있을 것으로 예상된다