• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.70-80
• /
• 2000

Princeton Ocean Model (POM) is modified to construct a three-dimensional, semi-implicit hydro¬dynamic model with a wetting-and-drying scheme. The model employs semi-implicit treatment of the barotropic pressure gradient terms and the vertical mixing terms in the momentum equations, and the velocity divergence term in the vertically-integrated continuity equation. Such treatment removes the external mode and thus the mode splitting scheme in POM, allowing the semi-implicit model to use a larger time step. Applied to hypothetical systems, both the semi-implicit model and POM give nearly the same results. The semi-implicit model, however, runs approximately 4.4 times faster than POM showing its improved computational efficiency. Applied to a hypothetical system with intertidal flats, POM employing the mode splitting scheme produces noises at the intertidal flats, that propagate into the main channel resulting in unstable current velocities. Despite its larger time step, the semi-implicit model gives stable current velocities both at the intertidal flats and main channel. The semi-implicit model when applied to Kyeonggi Bay gives a good reproduction of the observed tides and tidal currents throughout the modeling domain, demonstrating its prototype applicability.

• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.107-115
• /
• 2021

In order to analyze wave propagation, tidal current, and sediment transport in the vicinity of the Gaeya open channel, it was classified into before(CASE1W) and after(CASE2W) installation of various artificial structures, and the calculation results for CASE1W and CASE2W were compared. For wave propagation, the results of incident and reflected waves were derived using the SWAN numerical model, and the tidal current velocity results were derived using the FLOW2DH numerical model for tidal current. The results of the SWAN numerical model and the FLOW2DH numerical model became the input conditions for the SEDTRAN numerical model that predicts sediment transport, and the maximum bed shear stress and suspended sediment concentration distribution near the Gaeya open channel were calculated through the SEDTRAN numerical model. As a result of the calculation of the SWAN numerical model, the wave height of CASE2W was increased by 40~50 % compared to CASE1W because the incident wave was diffracted and superimposed and the reflected wave was generated by about 7 km long northen jetty. As a result of the calculation of the FLOW2DH numerical model, According to the northen breakwater, the northen jetty and Geumrando, CASE2W was calculated 10~30 % faster than CASE1W in the tidal current of the Gaeya open channel. As a result of the calculation of the SEDTRAN numerical model, the section where the maximum bed shear stress is 1.0 N/m² or more and the suspended concentration is 80mg/L or more was widely distributed in the Gaeya open channel from the marine environment by the complex wave field(incident wave, reflected wave and tidal wave) and the installation of various artificial structures. it is believed that a sedimentation phenomenon occurred in the Gaeya open channel.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.190-195
• /
• 2003

For many coastal problems, such as wave transformation, tidal circulation, sediment transports and diffusion phenomena, we resort to numerical techniques. The representative numerical techniques are the method of finite differences and finite elements. The approximate algebraic equations, referred to as finite difference equations(FDEs), are subsequently solved at discrete grid points within the domain of interests. Therefore, a set of grid points within the domain, as well as the boundaries of the domain, must be specified. The generation of grids for FDEs, with uniform spacing, is very simple compared to that of finite elements. However, within a very complex domain, there are few grid generation tools we can use conveniently. Unfortunately, most of the commercial grid generation programs are developed only for finite element method. In this paper, grid generation method using digitizer, with uniform rectangular spacing, are introduced in detail. Didger and Surfer programs by Golden Software are necessary to produce comparatively accurate and simple depth data.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.12-18
• /
• 2012

Stereo correspondence is the central problem of stereo vision. In this paper, we propose a stereo matching scheme based on a genetic algorithm using a multi-resolution method and AD-Census. The proposed approach considers the matching environment as an optimization problem and finds the disparity by using a genetic algorithm And adaptive chronosome structure using edge pixels and crossover mechanism are employed in this technique. A cost function is composes of certain constraints whice are commonly used in stereo matching. AD-Census measure is applied to reduce disparity error. To increase the efficiency of process, we apply image pyramid method to stereo matching and calculate the initial disparity map at the coarsest resolution. Then initial disparity map is propagated to the next finer resolution, interpolated and performed disparity refinement using local feature vector. We valid our method not only reduces the search time for correspondence compared with conventional GA-based method but also ensures the validity of matching.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2013

Acoustic backscatter profiles were measured by Eco-sounder along an east-west section in the mid-eastern Yellow Sea and at an anchoring station in the low salinity region off the Keum River estuary in September 2012, with observing physical water property structure by CTD. Tidal front was established around the sand ridge developed in 50 m depth region. Internal waves measured by Eco-sounder during low tide period in the eastern side of the sand ridge were nonlinear depression waves with wave height of 15 m and mean wavelength of 500 m. These waves were interpreted into tidal internal waves that were produced by tidal current flowing over the sand ridge to the southeast. When weakly non-linear soliton model was applied, propagation speed and period of these internal depression wave were 50 m/s and 16~18 min. Red tides by Dinoflagelates Cochlodinium were observed in the sea surface where strong acoustic scattering layer was raised up to 7 m. Hourly CTD profiles taken at the anchoring station off the Keum River estuary showed the halocline depth change by tidal current and land-sea breeze. When tidal current flowed strongly to the northeast during flood period and land-breeze of 7 m/s blew to the west, the halocline was temporally raised up as much as 2 m and acoustic profile images showed a complex structure in the surface layer within 5-m depth: in tens of seconds the declined acoustic structure of strong and weak scattering signals alternatively appeared with entrainment and intrusion shape. These acoustic profile structures in the surface mixed layer were observed for the first time in the coastal sea of the mid-eastern Yellow Sea. The acoustic profile images and turbidity data suggest that relatively transparent low-layer water be intruded or entrained into the turbid upper-layer water by vertical shear between flood current and land breeze-induced surface current.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.81-92
• /
• 2001

According to analyses of high-resolution seismic profiles (air gun, sparker, and SBP) and a deep-drill core(YSDP 105) in the mid-eastern Yellow Sea, stratigraphic and geoacoustic models have been established and seismo-acoustic modeling has been fulfilled using ray tracing of finite element method. Stratigraphic model reflects seismo-, litho-, and chrono-stratigraphic sequences formed under a significant influence of Quaternary glacio-eustatic sea-level fluctuations. Each sequence consists of terrestrial to very-shallow-marine coarse-grained lowstand systems tract and tidal fine-grained transgressive to highstand systems tract. Based on mean grain-size data (121 samples) of the drill core, bulk density and P-wave velocity of depositional units have been inferred and extrapolated down to a depth of the recovery using the Hamilton's regression equations. As goo-acoustic parameters, the 121 pairs of bulk density and P-wave velocity have been averaged on each unit of the stratigraphic model. As a result of computer ray-tracing simulation of the subsurface strata, we have found that there are complex ray paths and many acoustic-shadow zones owing to the presence of irregular layer boundaries and low-velocity layers.

• Korean Journal of Heritage: History & Science
• /
• v.41 no.2
• /
• pp.79-97
• /
• 2008

Four Wangs' landscape style (四王山水畵風), which had appeared in Beijing in the early 18th century, widely spread to Korea and Japan in the 19th century and became a significant basis for developing new painting styles in both countries. It was first introduced to Korea by Shin Wi (申緯) and Kim Jeong-hee (金正喜) who associated with literary men of the Qing Dynasty. Being influenced by them directly or indirectly, Shin Myeong-yeon (申命淵), Yi Han-cheol (李漢喆), Yu Suk (劉淑), Changv Seung-eop (張承業), An Choog-sik (安中植), and Jo Seok-jin (趙錫晋) attempted to adapt Four Wangs' landscape style and it later became a main Stream painting style of the Korean painting circles. Based on Four Wangs' landscape style, their landscape paintings had something in common in that they captured natural features from a short distance using the Down-Up prospective and placed guardian mountains across mountain streams by making a tall tree in the right or left bottom of the canvas as the starting point. However, recently unveiled court painter An Geon-yeong (1841~1876)'s the Landscape Screen is remarkable in that it is based on Four Wangs' style, which was in fashion in the late 19th century, but shows different aspects from other Four Wangs' style paintings in terms of feature capturing, brush stroke and colors. While most of An Geon-yeong's existing paintings are small ones, this folding screen is a big piece consisting of six-fold landscape paintings. In particular, it shows new aspects by creating a serene and calm atmosphere through the description of various landscape scenes with thin brush strokes using glossy ink, by showing a macroscopic view in some paintings through feature capture using a birds-eye view method, and by giving life to the canvas through smoke and clouds. This painting style is considered to be linked with those of Wang Xue-hao (王學浩, 1754~1832), Tang Yifen (湯貽汾, 1778~1853) and Dai Xi (戴熙, 1801~1860), based on Four Wangs' style in the early 19th century's Jiangnan Circle (江南 畵壇), who tried to express the energy and vitality of real landscapes by going around China's well-known mountains and complementing painting styles with drawing from nature. Therefore, An Geon-yeong's six-fold Landscape Screen is very significant as a rare case proving the introduction and reception of Jiangnan Circle's Four Wangs' landscape style which was different in many aspects from Beijing Circle in the 19th century.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.