• Korean Architects
• /
• no.7 s.78
• /
• pp.5-10
• /
• 1975

• Korean Architects
• /
• no.9 s.80
• /
• pp.15-23
• /
• 1975

• Korean Architects
• /
• no.3 s.74
• /
• pp.23-35
• /
• 1975

• Korean Architects
• /
• s.480
• /
• pp.62-69
• /
• 2009

• The Optical Journal
• /
• s.126
• /
• pp.17-19
• /
• 2010

1991년 3월 창업하여 코팅전문업체로 잘 알려진 (주)태영광학(대표 엄두일, www.tyoptics.com)이 고난이도 기술에 해당하는 방산용 제품을 속속 선보이며 빙산시장의 새로운 다크오스로 떠오르고 있다. 지난해 군용장비 모니터 등에 사용되는 기능성 윈도와 사격통제장치중 기술적난이도가 가장 높다고 하는 방향포경 등을 선보이는 한편, 원활한 조립생산을 위한 제2공장을 신축하는 등 방위산업분야에 주력하며 조립업체를 향한 변화된 행보를 보이고 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.244-251
• /
• 2015

The paper evaluates the effect of the physical property, fineness modulus (FM) and replacement ratio of crushed sand on the characteristics of concrete. This is intended to use crushed sand from Daegu-Kyungbuk region as the fine aggregate of concrete. The experimental result indicates that the replacement ratio of crushed sand needs to be less than 50% to satisfy the mixed gradation of both natural and crushed sand when their FMs are 2.0 and 3.2, respectively. The slump of concrete with crushed sand increased as the replacement ratio of crushed sand increased, while the workability of concrete with the replacement ratio of more than 75% was significantly reduced. The air content and bleeding rate of concrete was reduced as the replacement ratio increased. Furthermore, due to the enhancement of the concrete adhesive regardless of the FM of crushed sand, compressive strength of concrete tended to improve as the replacement ratio increased.

• Korean Architects
• /
• no.7 s.67
• /
• pp.22-30
• /
• 1974

모듀울설계는 건축의 공업화생산을 위한 수단으로서, 재래식 설계와는 달리 건축척도조정체계를 사용한 설계방법이다. 본 논문에서는 모듀울설계에 따른 건축계획의 기본적인 개념, 구조설계와의 관계 및 실제 모듀울설계를 구성하는 제요소와 도면에 대하여 설명한다. 건축공업화는 궁국적으로 양산체제를 확립시키기 위한 것이며, 양산체제를 통한 건축부품과 구조의 단순화, 표준화, 조립화에 의해 자재의 절감, 인건비의 절약, 공기의 단축, 품질관리를 도모할 수 있다.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.325-331
• /
• 2020

Macromia daimoji nymphs (Endangered Species II) are known to inhabit the Naeseong Stream in Korea. In March 2019, we performed a correlation analysis between sediment particle size and the M. daimoji population using data collected from a 0.2-㎡ area at 37 sites in Naeseong riverbed. Particle size analysis showed different ratios of sediments in the riverbed: Coarse Sand (500-1,000 ㎛) 52.5%; Very Coarse Sand (1,000-2,000 ㎛) 25.6%; Medium Sand (250-500 ㎛) 17.2%; Fine Sand (125-250 ㎛) 3.1%; Very Fine Sand (63-125 ㎛) 1.0%; and Silt (less than 63 ㎛) 0.7%. The number of M. daimoji nymphs showed a positive correlation with Very Fine Sand and Fine Sand and a negative correlation with Coarse Sand, indicating that M. daimoji nymphs inhabit fine sand. These results can be used to monitor changes in the riverbed environment of Naeseong Stream to ensure the conservation of M. daimoji habitat.

• Journal of the Korean earth science society
• /
• v.31 no.7
• /
• pp.708-719
• /
• 2010

The Gochang-gun Dongho macro-tide pocket-type beach, located on the southwestern coast of Korea, is investigated in terms of the seasonal variations of surface sediment and sedimentary environment. Surface sediments of 45 sites in four seasons (May 2006-February 2007) are sampled across three survey lines (15 sites in each survey line). The surface sediments of the Dongho Beach are mainly composed of fine to coarse sands, and the ratio of fine sand is the largest. The average of grain size is the coarsest in the summer. The spatial distribution of surface sediments shows a coast-parallel band of fine and medium sands during three seasons of spring, fall, and winter, whereas medium sands dominated in the northern part of the study area during the summer. These results suggest that a tide is more effective than a wave in the surface sediments of the Dongho Beach during the summer.

• Korean Architects
• /
• s.569
• /
• pp.102-121
• /
• 2016

일본의 시바우라공과대학에서 에네마네하우스 공모전에 참여해 제안했던 제로에너지하우스(ZEH)로 요코하마에서 시공한 후 해체하여 후쿠시마에 재설치해 활용한 프로젝트이다. 시바우라공과대학은 설계단계에서부터 BIM을 활용해 에너지 분석 및 시공을 위한 각종 시뮬레이션을 수행하였으며 특히 시공 후 전시기간이 끝난 후 재설치를 위한 조립시스템 검토에 유용하게 활용하였다. 이를 통해 에너지 효율과 지속가능성을 BIM을 통해 향상시킨 모범적인 사례이다.