Transactions of the Korean Society of Automotive Engineers
/
v.5
no.3
/
pp.147-158
/
1997
This paper presents the analysis technique and procedure of main engine components-cylinder block, cylinder liners, gasket and cylinder head-using the finite element method, which aims to assess mainly the potential of lower oil consumption in a view point of engine design and to decide subsequently the accuracy of engine design which was done. The F.E. model of an engine section consisting of one whole cylinder and two adjacent half cylinders is used, whereby the crankcase is cut off at the block bottom deck. By means of a 3-dimensional F.E. model-including cylinder block, liners, gasket, cylinder head, bolts and valve seat rings as separate parts a linear analysis of deformations and stresses was performed for three different loading conditions;assembly, thermal and gas loads. For the analysis of thermal boundary conditions also the temperature field had to be evaluated in a subsequent step.
Proceedings of the Korean Operations and Management Science Society Conference
/
2002.05a
/
pp.792-796
/
2002
관찰적 작업자세 평가기법은 각 관절의 자세를 관찰 기록하여 자세 부하를 평가하는 실용적인 인간공학적 작업평가 기법이다. 본 연구에서는 각 관절의 불편도 지수와 전신의 자세 부하의 관계성을 모형화하고, 전신의 작업자세 부하를 평가하는 방법론을 제시하였다. 자동차 조립공정의 대표적인 작업자세들을 대상으로 하여 정적인 자세의 심물리학적 부하를 전신에 대하여 평가하였다 전신의 불편도는 비중립 자세를 취하고 있는 각 관절의 조합에 의해 영향을 받는다. 특히, 자동차 조립공정에서는 어깨 높이 이상의 작업을 대상으로 하는 경우에 어깨, 목, 허리, 손목 등에서 비중립 자세를 동시에 취하여 전신의 불편도가 큰 것으로 나타났다. 평가된 전신의 불편도와 각 자세의 관절별 불편도 지수의 관계를 다중선형회귀모형으로 모형화하는 것이 타당한 것으로 나타났다. 모형에서 전신 불편도에 가장 큰 영향을 미치는 관절은 어깨이며, 손목의 영향이 가장 적은 것으로 나타났다. 이 모형을 통해 작업자세 부하를 정량적으로 평가하는 것이 가능할 것으로 기대된다.
Proceedings of the Korean Operations and Management Science Society Conference
/
2002.05a
/
pp.697-703
/
2002
본 연구에서는 선박 건조 공정 중 블록조립공정을 다룬다 블록과 정반(bay)의 정보가 주어져 있을 때, 각 블록의 조립작업을 하게 될 정반과 조립작업을 시작하는 시작시점을 결정해야 한다. 정반에서 중요하게 고려할 두 가지 자원은 바로 면적과 시수이다. 본 연구에서 다루는 문제의 목적식은 정반에 할당피지 못하거나 작업시점을 결정하지 못해 작업을 할 수 없게 된 실패 블록의 수를 죄소화시키는 것과 시수 부하의 부하평준화를 이루는 것이다. 이 문제를 풀기 위해 제약만족기법(CSP)에 기반을 두는 알고리듬을 제안한다. 그리고 이 알고리듬은 실제 데이터를 가지고 실험을 하게 되며 그 결과와 기존의 일정계획 결과와 비교 분석하게 될 것이다.
Proceedings of the Korean Operations and Management Science Society Conference
/
2005.05a
/
pp.425-428
/
2005
본 연구는 건설장비 차량 조립부품을 제작하는 가공공장의 계획 및 운영 시스템 개발에 대한 내용이다. 연구의 대상은 건설장비 차량인 굴삭기, 휠로더, 지게차의 조립부품을 제작하는 공장으로 제작품별 제작라인이 구성되어 있다. 그리고 각 제작라인에는 여러 개의 공정이 있으며, 일부 공정은 작업자에 의해 작업이 이루어지고, 용접 및 가공 등은 자동화된 장비 및 설비에 의해 작업이 된다. 가공공장에서 관리 및 운영의 주요 관점은 이후 공정인 조립공장의 조립 착수일에 늦지 않게 제작된 부품을 공급하는 것이다. 그리고 공장 자체적으로 제작라인 내의 재공재고 감소, 작업일간 작업부하평준화, 자동화 장비 및 설비의 효율 극대화 등이 공장의 주요 관리 사항이다. 따라서 본 연구에서는 가공공장에서 제작되는 조립부품의 납기일 준수, 재고 감소, 부하 평준화, 장비효율의 극대화를 위해 공장을 체계적으로 관리하기 위한 계획 및 운영 시스템을 개발하였다. 개발시스템에는 제작라인별 제작 착수 및 자재발주${\cdot}$입고 관리, 공정별 실적관리, 실시간 작업 진행 관리, 용접 불량 관리 기능 등이 있다. 시스템은 MSSQL 서버, 오라클과 Visual Basic, Visual C# ASP로 개발되었다.
The Transactions of the Korea Information Processing Society
/
v.2
no.6
/
pp.823-830
/
1995
A reactive piloting policy for Flexible Assembly Lines (FAL) is proposed, where the sequencing of the operations as well as the assignment of tasks to manipulators are not predetermined but driven by the actual state of the FAL For all work-in-process coming from a manipulator, the next destination is determined by minimizing a temporal criterion taking into account the time needed to reach the destination, the load of the manipulator to reach, the durati on of the operation to be completed in the destination manipulator, and the availability of product components in this manipulator. The purpose of proposed piloting policy is to manufacture a given quantity of products as rapidly as possible by balancing the amount of work allocated to manipulators and to reduce the efforts required for scheduling the production of short series of diversified products. After introducing the characteristics of assembly processes and FAL modelization, the proposed algorithm is evaluated by simulations. The simulations of the proposed algorithm showed satisfactory results.
전력계통의 증대에 따라 변전소용 변압기도 대용량화되어 가고 있다. 변전소용 대용량 변압기의 경우 최대문제가 되는 것은 철도운송의 경우 운송한계에 있다. 일본의 철도는 협궤이기 때문에 운송능력이 작고 275KV 변압기의 경우 조립운송할 수 있는 한계용량은 종래 300MVA라고 되어 왔지만, 최근 기술의 진보와 신뢰성 향상 시책에 따라 450MVA까지도 철도운송을 하는 것이 가능케 되었다. 이와같은 사정때문에 당사는 이번에 중부 전력.북풍전변전소에 3상 60Hz, 275/15 4/31.5KV, 450/450/135MVA 변압기를 납품하였다. 본기는 초고압 변전소용으로는 일본에서 최대급의 것으로 여러가지의 특징을 가지고 있다. 그 주요점을 들면, (1) 철도에 의한 조립운송을 가능케 했다. 더우기 부하시 TAP 절환기를 본체 TANK에 조립해서 운통한다. (2) 일차 초고압 권선에는 선로단을 중앙에 배치한 HISERCAP 권선을 채용한다. (3) 당초 65Phon, 장래 55Phon의 저소음사양을 만족시키기 위해서 고효율의 송유풍냉식 저소음방열관을 사용했다. (4) 기기의 신뢰성을 높이기 위해 설계, 제조, 시험 검사 각면에 만전을 기했다. 그러나 그외에도 여러가지 연구가 추진되고 있으며 다음에 개요를 설명하고져 한다.
본 논문은 조선업에서 평블럭을 생산하는 패널블럭조립공장의 일정계획 문제를 해결하기 위한 유전알고리즘의 적용 방안을 제시하고 있다. 패널불럭조립공장의 일정계획은 작업장별 평준화와 각 작업장내에서의 일자별 부하 평준화라는 두가지 목표를 가지고 있다. 이러한 목표를 달성하기 위해 본 논문에서는 유전알고리즘을 계층적으로 나누어 적용하였다. 상위단계 유전알고리즘은 작업장별 부하 평준화를 담당하며 하위단계 유전알고리즘은 상위단계 유전알고리즘의 결과를 바탕으로 각 작업장내에서 일자별 부하 평준화의 최적화를 담당한다. 실험 결과, 유전알고리즘에 의한 일정계획이 수작업에 의한 방법보다 처리시간이 짧게 소요되고 부하 평준화의 측면에서 더 좋은 해를 얻을 수 있음을 확인하였다.
Multi-anvil press (MAP) is one of the high pressure apparatuses and often generates the pressure-conditions ranging from 5 to 25 GPa and temperature-conditions up to $2,300^{\circ}C$. The MAP is, therefore, suitable to explore the pressure-induced structural changes in diverse earth materials from Earth's mantle and the bottom of the mantle transition zone (~660 km). In this study, we present the experimental results for pressure-load calibration of the 1,100-ton multi-anvil press equipped in the authors' laboratory. The pressure-load calibration experiments were performed for the 14/8 step, 14/8 G2, 14/8 HT, and 18/12 assembly sets. The high pressure experiments using ${\alpha}$-quartz, wollastonitestructure of $CaGeO_3$, and forsterite as starting materials were analyzed by powder X-ray diffraction spectroscopy. The phase transition of each mineral indicates the specific pressure that is loaded to a sample at $1,200^{\circ}C$: a transition of ${\alpha}$-quartz to coesite at 3.1 GPa, that of garnet-structure of $CaGeO_3$ to perovskite-structure at 5.9 GPa, that of coesite to stishovite at 9.2 GPa, and that of forsterite to wadsleyite at 13.6 GPa. While the estimated pressure-load calibration curve is generally consistent with those obtained in other laboratories, the deviation up to 50 tons is observed at high pressure above 10 GPa. This is partly because of the loss of oil pressure at high pressure resulting from the differences in a sample chamber, and the frictional force between pressure medium and second anvil. We also report the ${\sim}200^{\circ}C/mm$ of thermal gradient in the vertical direction of the sample chamber of 14/8 HT assembly. The pressure-load calibration curve and the observed thermal gradient within the sample chamber can be applied to explain the structural changes and the relevant macroscopic properties of diverse crystalline and amorphous earth materials in the mantle.
In this study the cylinder liner deformation which is one of the most influencing factors in a diesel engine oil consumption was performed by the finite element analysis on the basic designed structure consisting of the cylinder block, head and liners under the conditions of assembly, thermal and gas loads. Compared with a large number of other cylinder blocks showing remarkable harmonic orders of the liner distortion, results are excellent. Namely. the higher harmonic order amplitudes of the radial liner deformation amount to 1 ~ 2㎛ maximally. The main reason lies in the relatively large wall thickness of the liner which amounts to 8.2% of the bore diameter. Besides, a very stiff and symmetrical cylinder block design in combination with a bolt force introduction approximately 1.5mm below the block top deck have a further share on these results. Therefore excellent low oil consumption can be expected.
Proceedings of the Korean Operations and Management Science Society Conference
/
1993.10a
/
pp.106-107
/
1993
오늘날 다양한 고객욕구를 충족시키기 위해 재공품재고 없이 단일조립라인에서 다양한 제품들을 생산하는 혼합모델조립(MMAL)방식이 많이 사용되고 있다. 일반적으로 MMAL은 모든 일감에 대해 동일한 작업장, 작업시간이 동일한 여러가지 사양중 하나를 선택할 수 있는 작업장, 그리고 작업시간이 상이한 작업들을 수행하는 작업장으로 구성되어 있다. 첫째 유형의 작업장에서의 작업순서결정은 전혀 문제가 되지 않는다. 그러나 두번째 유형의 작업장에서는 작업순서에 따라 작업준비비용이 달라지게 된다. 세번째 유형의 작업장에서는 필요로 하는 작업유형의 종류와 양에 따라 원활한 흐름에 변화를 가져온다. 조립라인의 일괄작업순서가 작업장의 처리능력보다 많은 부하를 초래하면 후속 작업장의 원활한 작업을 위하여, 해당 작업장의 작업자들을 지원하는 보완작업(utility work)을 행하여야 하나, 타 작업장에서 해당조립품의 작업시간에 따라 해당작업장의 부하는 평활화될 수 있으므로 보완작업량은 통제가능하다. 따라서 준비비용과 보완작업 비용의 합을 최소화하는 일정계획이 요구된다. 이에 관한 연구들이 행해져오고 있으나, 두가지 비용의 합을 최소화하는 연구는 아직 많이 진척되지 못하고 있는 실정이다. 선행연구들에서 이미 제시된 TSP개념을 이용한 비선형2진 혼합정수계획모델인 수리모델을 이용할 수 있다. 그러나 이 모델은 너무 복잡하여 현실문제를 적용할 경우 계산이 불가능하다. 따라서 단시간에 최적에 가까운 해를 구하기 위한 휴리스틱 기법의 개발이 요구된다. 따라서 본 연구에서는 이를 위한 기초연구로서 우선 준비비용을 고려하지 않는 경우의 휴리스틱기법을 개발하는데 초점을 맞추었다. 특히 본 연구에서는 작업장에서 행해지는 작업유형은 기본작업과 여러가지 선택작업이 있을 수 있으므로 선행연구를 확장하여 기본작업과 두가지의 선택작업이 행해지는 경우에 촛점을 맞추었다. 그리하여 다작업장의 휴리스틱에 의거한 작업순서 결정을 위해 우선 BB의 상한을 구하는 연구를 행했다. 이를 위해 우선 단일작업장에서 야기될 수 있는 모든 상황을 고려한 최적 작업순서 결정규칙을 연구했으며, 이의 증명을 위해 이 규칙에 의거했을 때의 보완작업량이 최소가 된다는 것을 밝혔다. 보완작업 계산의 효율성을 제고하기 위해 과부하(violation)개념을 도입하였으며, 작업유형이 증가된 상황에서도 과부하 개념이 보완작업량을 충분히 반영할 수 있음을 밝혔다. 본 연구에서 제시한 최적 작업순서 규칙에 의거했을 때 야기될 수 있는 여러가지 경우의 과부하를 모두 계산했다. 앞에서 개발된 단일작업량의 최적 작업순서 결정규칙을 이용하여 다작업장의 문제를 실험했다. 이 문제는 규모가 매우 크므로 Branch & Bound를 이용하였으며, 각 가지에서 과부하량이 최적인 경우만을 고려하는 휴리스틱을 택하여 실험자료를 이용하여 여러 회 반복실험을 행했다. 그리고 본 연구의 성과를 측정하기 위해 휴리스틱 기법시 소요되는 평균 CPU time 범위에서, 랜덤 작업순서에 따른 작업할당을 반복실험하여 이중 가장 좋은 해와 비교했다. 그러나 앞으로 다작업장 문제를 다룰 때, 각 작업장 작업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.