• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.175-181
• /
• 2009

In this research, experiments were conducted to find out whether polycarboxylate could be used as a crude steel admixture for practical work, depending on the change in the replacement level of the compound mixed into polycarboxylate. Its fluidity was satisfactory, its airspace was a bit smaller than the KS standard, and its unit volume weight was proven to meet the standard. The amount of bleeding was smallest in B2, and in terms of the solidification time, the first and the last solidification was faster in A1, B1, and C1. With regard to the compressive strength in early days as acharacteristic of hardened concrete, all addition rates of 7-day C2 displayed the highest strength value, among which the addition rate of 1.3% had the biggest strength performance tendency. The seal strength also showed the strength performance rate which was about one tenth as big as that of the compressive strength. The length change rate resulting from dryness and contraction was proven to be good, and once the appropriate AE air entraining agent is used, it is evaluated to be a very useful and practical compound out in the field.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.177-184
• /
• 2015

In order to use the high-volume slag cement as a construction materials, a proper activator which can improve the latent hydraulic reactivity is required. The dissolved aluminum silicon ions from ground granulated blast furnace slag (GGBFS) react with sulfate ions to form ettringite. The proper formation of ettringite can increase the early-age strength of high-volume GGBFS (80%) cement. The aim of this study is to investigate the hydration properties with sulfate activators (sodium sulfate, anhydrite). In this paper, the effects of $Na_2SO_4$ and $CaSO_4$ on setting, compressive strength, hydration, micro-structure were investigated in high-volume GGBFS cement and compared with those of without activator. Test results indicate that equivalent $SO_3$ content of 3~5% improve the early-age hydration properties such as compressive strength, heat evolution rate, micro-pore structure in high-volume GGBFS cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.124-129
• /
• 1995

In this study proposed to rapid and simple methid of test for early evaluation of strength of cement. The obtained results through a series of experiment are summarized as follow. The resistance ratio was decreased as the increase of water-cement ratio. The compressive strength of cement was increased as the resistance ratio increase. The experimental results of compressive strength of cement is shown in the same value no relation with the kind of cement respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.195-196
• /
• 2012

In this study, it was investigated early age strength generation of low cement concrete with type and addition ratio of hydration accelerator obtaining fundamental data for the application in construction field.

• Journal of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.69-76
• /
• 2001

Foamed concrete for cast-in-site, which shows excellent lightweight, thermal insulation, noise insulation, constructability and cost efficiency, has been applied as thermal insulation or filling material for On-dol. However, the technology is too insufficient to obtain the high level of quality, and serious problems often occur in quality control at sites. It, thus, is necessary to establish the proper and reasonable quality control method for ensuring the required quality, based on the investigation on the physical properties and their reciprocal relation. This study aims to settle the quality control method in case of applying FA foamed concrete replacing 40% by weight with fly-ash as the filling material for On-dol. The results of the study include the correlation among flow, as-placed density and foam ratio of fresh foamed concrete, the correlation between physical properties before hardening and after 28-day, provision of an equation to estimate 28-day compressive strength early with 7-day compressive strength, and suggestion of quality criteria for the revision of KS on foamed concrete for cast-in-site.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.239-246
• /
• 2014

High volume slag concrete is attracting new attention and are thought to have promising potential for industrial applications, partly due to the climate debate, but especially due to their very low heat of hydration and their good durability in chemically aggressive environments. However, High volume slag concretes tend to have slower strength development especially. In this study, the effect of anhydrite ($CaSO_4$) on the mechanical and durability performance of high volume slag concrete were investigated. The main variables were anhydrite contents (0, 4, 6, 8, 10%). Test results show that 4~8% anhydrite concrete have improved engineering properties (hydration, compressive strength, shrinkage, creep, carbonation) as control concrete at early ages.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.765-768
• /
• 2004

This study reports the site application of the early strength development technology for form stripping earlier than normal state in the apartment construction. It is a method of framework rationalization and it needs the technology of early strength development concrete and 6-day cycle process. We applied the method to the apartment construction to reduce the floor construction period and to maximize the economical effect by reduction of the period of total construction. As a result, we confirmed the superior property of the early strength development of the concrete and reliable success of 6-day cycle process.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.187-197
• /
• 2010

The longitudinal reinforcement ratio for the performance-based design of columns was studied. Unlike the existing design codes using uniform minimum reinforcement ratio and effective stiffness for all columns, the longitudinal reinforcement ratio of columns was defined as the function of various design parameters. To evaluate the minimum reinforcement ratio, two conditions were considered: 1) prevention of passive yielding of compression re-bars due to the creep and shrinkage of concrete under sustained service loads; and 2) ultimate flexural strength greater than the cracking moment capacity to maintain the ductility of columns for earthquake design. In addition, the effective flexural stiffness of columns for structural analysis was determined according to the longitudinal reinforcement ratio. The design method addressing the three criteria was proposed. The proposed method was applied to a design example.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.254-255
• /
• 2014

This study is a part of development to improve early-age compressive strength of concrete by using industrial by-products. It tried to investigate the characteristics of early-age compressive strength according to curing temperature and industrial by-product replacement ratio 10, 20, and 30 %. As a result, regardless of industrial by-product replacement ratio and age, early-age compressive strength of concrete was found to be high compared to Plain using 100 % cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.435-436
• /
• 2009

The objective of this study was to develop the high-durable concrete which is mixed silica fume and fly ash in post-tensioned concrete pavement. Test results show that early-age compressive strength was increased with addition of silica fume. Water-permeability was improved significantly comparing with standard concrete.