• Title/Summary/Keyword: 제하 변형률

Search Result 24, Processing Time 0.02 seconds

Experimental Study on Failure Behavior of Steel Members and Elements under Very Low Load-Cycles (극저하중(極低荷重)사이클을 받는 강부재(鋼部材) 및 요소(要素)의 파괴거동(破壞擧動)에 관한 실험적(實驗的) 연구(硏究))

  • Park, Yeon Soo
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.14 no.2
    • /
    • pp.257-268
    • /
    • 1994
  • An experimental study was carried out to elicit important factors causing cracks and rupture of steel members and their elements under imposed large repeated deformations, and of the quantitative relationships among the important physical factors leading to failure. Each of twenty-eight angles and nine thin-plates served as the specimen and was subjected to repeated axial load after undergoing inelastic buckling. Particular attention was paid to the effects of loading pattern, failure mode and cross-sectional shape on the very-low-cycle failure behavior under loading repetitions of the order of a few to twenty. The experimental results show that energy dissipation capacity depends heavily on the entire history of loading, the failure mode, the slenderness ratio and the width-to-thickness ratio. No simple quantitative relations were observed between the initiation of the visible cracks or rupture and the energy dissipation capacity. The maximum values of residual "net" strains are found to range from 25% to 40%, independent of the test parameters.

  • PDF

A New Proposed Technique for a Secondary Consolidation Coefficient Based on the Constant Rate of Strain Test (CRS시험에 의한 2차압밀계수의 결정방법 제안)

  • 김형주;이민선;이용주;김대우
    • Journal of the Korean Geotechnical Society
    • /
    • v.20 no.8
    • /
    • pp.113-121
    • /
    • 2004
  • The present study is suggested to estimate the degree of secondary consolidation caused by various changes of stress such as loading, unloading and reloading in improving poor subsoil through pre-compression loading construction method and, for this purpose, examined the characteristics of the consolidation of Kunsan clay through incremental loading test (IL) using standard consolidation tester and constant loading rate test (CLR), which were adapted from the constant rate of strain test (CRS). In addition, after CRS test, this study determined the characteristics of secondary consolidation and relationships among void ratio, effective stress and time according to the ratio of effective over-consolidation on reloading at the point of time of random expansion. Kunsan clay had larger expansion and smaller secondary consolidation settlement when the ratio of effective over-consolidation was high. In addition, when loading was applied after the load was removed at once, the secondary consolidation coefficient $C'_{\alpha}$ was smaller than that when the load was removed gradually, and when the ratio of effective over-consolidation was over 1.4 a similar value was produced. Based on the entire settlement resulting from reloading, the secondary consolidation coefficient $C"_{\alpha}$ increased non-linearly with the lapse of time but the final value was similar to that in the case of rapid removal. The strain velocity of void ratio was in a regular linear relationship with the increase of loading time regardless of the ratio of effective over-consolidation in both tests and it grew smaller with the increase of the ratio of effective over-consolidation.tion.

Flexural Behavior of Large-Diameter Composite PHC pile Using In-Filled Concrete and Reinforcement (속채움 콘크리트와 철근으로 보강된 대구경 합성 PHC말뚝의 휨성능 평가)

  • Bang, Jin-Wook;Park, Chan-Kyu;Yang, Seong-Yeong;Kim, Yun-Yong
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.20 no.5
    • /
    • pp.109-115
    • /
    • 2016
  • A demand of high bearing capacity of piles to resist heavy static loads has been increased. For this reason, the utilization of large diameter PHC piles including a range from 700 mm to 1,200 mm have been increased and applied to the construction sites in Korea recently. In this study, in order to increase the flexural strength capacity of the PHC pile, the large diameter composite PHC pile reinforced by in-filled concrete and reinforcement was developed and manufactured. All the specimens were tested under four-point bending setup and displacement control. From the strain behavior of transverse bar, it was found that the presence of transverse bar was effective against crack propagation and controlling crack width as well as prevented the web shear cracks. The flexural strength and mid-span deflection of LICPT specimens were increased by a maximum of 1.08 times and 1.19 times compared to the LICP specimens. This results indicated that the installed transverse bar is in an advantageous ductility performance of the PHC piles. A conventional layered sectional analysis for the pile specimens was performed to investigate the flexural strength according to the each used material. The calculated bending moment of conventional PHC pile and composite PHC pile, which was determined by P-M interaction curve, showed a safety factor 1.13 and 1.16 compared to the test results.

Why Central Banks Intervene? (왜 중앙은행은 개입하는가?)

  • Ko, Jong-Moon
    • The Korean Journal of Financial Management
    • /
    • v.12 no.2
    • /
    • pp.273-298
    • /
    • 1995
  • 1960년대, 각국의 환율이 미국의 달러화에 연동(pegging)된 고정환율제도를 근간으로 하는 브레튼우즈(Bretton Woods)체제하에서 각국의 중앙은행은 환율을 일정한 범위 내로 유지하기 위한 정책수단으로 외환시장개입을 적극 활용하였다. 1973년 브레튼우즈체제하의 고정환율제도가 붕괴되고 변동환율제도가 채택된 이후에도 각국의 외환시장개입정책은 계속되었다. 1980년대에 레이건 행정부의 재정팽창정책과 미연방준비은행의 긴축통화정책으로 금리의 지속적인 상승과 미달러화의 큰폭의 절상이 이루어 졌다. 이에 국제무역의 위기를 우려한 미국, 독일, 프랑스, 영국, 일본 등 선진 5개국(Group-5, G5)은 1985년 9월 22일 미 달러화의 절하를 위해 외환시장에 공동으로 개입할 것을 주내용으로 한 플라자합의(Plaza Agreement)를 발표하였다. 그후에도 1987년 2월 23일 열린 루브르협정(Louvre Accord, G-6 Communique)에서 환율을 현수준으로 유지시키기 위한 목표환율대(Target zone)를 설정하고 외환시장개입을 통해 이를 유지하기로 합의한 바 있다. 이후의 구미각국은 환율의 관리를 위하여 국가가 공동으로 외환시장에 개입하곤 했다. 본 논문은 1987년 루브르협정 이후 미국, 독일 및 일본의 중앙은행의 외환시장 개입 정책이 소기의 목적을 달성했는지의 여부를 규명해 보고자 한다. 즉, Federal Reserve, Bundesbank 및 Bank of Japan의 외환시장개입이 현물환율시장(spot market)에서 각각의 변동성을 감소 시켰는지의 여부를 독일의 마르크화 및 일본의 엔화를 중심으로 규명해 보고자 한다. 1981년 루브르협정이후, 미국, 독일 및 일본의 중앙은행은 미국 달러화에 대한 마르크 및 엔화의 환율을 안정시키기 위해 꾸준히 외환시장에 개입해 왔다. 외환시장의 개입유형은 크게 태화외환시장개입(non-sterilized intervention)과 불태화외환시장개입(sterilized intervention)으로 구분할 수 있는데, 전자는 외환당국이 민간부문과 외화채권을 거래함으로써 본원통화의 크기가 변하는 개입형태를 의미하는 반면에 후자는 외환당국의 순외화자산의 크기변화가 본원통화의 변화를 초래하지 않는 경우이다. 즉, 불태화외환시장개입은 순외화자산의 증감이 순국내자산의 증감과 반비례해서 이루어지기 때문에 본원통화의 크기에는 변함이 없다. 외환시장개입이란 외환당국이 은행간 시장에서 민간시잔 참가자들과 행하는 적극적인 외환거래를 의미한다. 반면, 넓은 의미에서의 외환시장개입에는 수동적 외환시장개입이라고 불리는 고객거래가 포함된다. 후자의 거래는 국내통화 및 외화표시 자산의 상대적 공급규모를 변화시킨다는 의미에서 전통적외환시장개입과 동일한 효과를 갖기 때문에 광의의 외환시장 개입으로 분류된다. 외환시장의 개입목적은 크게 세 가지로 분류할 수 있다. 첫째, 환율의 안정적 운영이다. 환율수준이 자유롭게 변화되는 변동환율제도하에서 환율의 지나친 변동으로 인한 실물경제로의 부정적인 영향을 최소화하기 위해서 환율의 지나친 변동으로 인한 실물경제로의 부정적인 영향을 최소화하기 위해서 환율의 안정을 정책 목표로 설정하는 경우와 고정환율제도하에서 환율을 일정수준으로 유지시키기 위해서 외환당국이 외환시장에 개입하는 경우가 여기에 해당된다고 볼 수 있다. 둘째, 환율수준의 균형수준으로의 조정이다. 이때 야기될 수 있는 문제점으로는 환율균형 수준을 어떻게 정의, 추정할 것이냐 하는 점과 목표환율정책이 다른 정책목표와 상충될 수 있다는 점이다. 셋째, 외환당국이 공적외환보유액이나 구성을 변화시킬 목적으로 외환시장에 개입하는 경우이다. 이때의 외환시장개입은 현재의 환율수준이 개입으로 인하여 과도하게 이탈하는 문제가 발생하지 않을 것을 전제로 한다. 본고에서는 현물환율에 영향을 미치는 요소로 미국, 독일 및 일본의 중앙은행의 개입효과, 요일효과, 통화의 공급량(M1), 무역적자의 폭, 산업의 생산량, 생산가격지수(PPI), 소비자물가지수(CPI), 실업률, 옵션의 내재적 변동성 등을 고려한다. 환율의 변동성을 추정하는 식은 GARCH 모델이 사용된다. 본 추정모델은 Dominguez(1993)의 확장이다. Dominguez (1993)의 논문은 GARCH 모델을 써서 미국, 독일 및 일본의 중앙은행의 시장개입효과를 분석했으나, 거시변수를 고려대상에서 제외시켰다. 본 논문은 위의 방법에 거시변수를 삽입하고 모델을 변형시켜서 더 확실한 시장개입효과와 거시변수효과를 밝혔다. 또한 옵션의 내제적 변동성을 구하는 과정에서 American option model을 사용하는 대신, Bourtha & Courtadon (1987)등이 밝힌 바와 같이 American style option이라 할지라도, European Model을 쓰면 더욱더 간편하고, 예측력도 American Model에 뒤지지 않음을 이용하여, European Model을 써서 내재적 변동성을 구한 다음 이것을 독립변수로 이용하였다. 본 모델의 추정 결과는 3국의 시장개입정책이 현물환율과 옵션의 내재적 변동성을 증가시켜서 Louvre 협정이후 각국은 시장개입의 목적을 달성하지 못한 것으로 나타났다.

  • PDF