• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.923-933
• /
• 2017

This study was carried out to examine the quality characteristics of Doenjang manufactured with or without soaking Meju in brine according to salt concentrations (8 and 12%) during fermentation for 6 months. The moisture content and salinity of Doenjang fermented for 6 months were 54.9-60.3% and 7.8-12.5%, respectively. Doenjang using soaking Meju in brine had higher pH and lower titratable acidity than that using non-soaking Meju. The reducing sugar content in all samples was increased until 2 months and then decreased regardless of soaking Meju, especially that of non-soaking 8% Doenjang was the highest. The 8% low-salt Doenjang was shown the highest amino-type nitrogen content, especially the soaking Doenjang was higher than the non-soaking Doenjang. ${\alpha}$-amylase activity of all samples during fermentation were continuously decreased from 0.91-0.94 Unit/g to 0.01-0.06 Unit/g, especially the 8% soaking Doenjang was shown the highest activity after 2 months. Total bacterial count of the soaking Doenjang at the 6 months was in range of 7.8-8.0 log CFU/g and that of the non-soaking Doenjang was in range of 7.2-7.5 log CFU/g. By taste analysis, the 8% soaking Doenjang was shown the similar taste pattern with commercial Doenjang. In conclusion, the 8% low-salt Doenjang manufactured with soaking Meju in brine was a suitable concentration in order to reduce salt intake.

• Journal of Ginseng Research
• /
• v.30 no.2
• /
• pp.88-94
• /
• 2006

Ginseng as a raw material for production of probiotic ginseng product by lactic acid bacteria (LAB) was evaluated in this study. Either white ginseng (WG) or red ginseng (RG) (1% or 5%, w/v) were directly inoculated with a 24 hold seed culture of twenty seven substrains of four different LAB ($1.0{\times}10^6CFU/ml$); Lactobacillus spp., Streptococcus/Enterococcus spp., Leuconostoc/Lactococcus spp. and Bifidobacterium spp., and incubated at $37^{\circ}C$ for 24 or 48 h. Among 27 kinds of LAB, seven substrains of Lactobacillus (MG208, MG311, MG315, MG501, MG501C, MG505, MG590) and one Bifidobacterium (MG723) were selected based on their dose dependent stimulation of the growth of LAB in the presence of ginseng and changes in pH, acidity and viable cell counts during fermentation were examined. Lactobacillus MG208 specifically was found to show the best growth on 5% RG and reached nearly $14.0{\times}10^8CFU/ml$ after 48 h of fermentation and produced the titratable acidity as $0.84{\pm}0.02%$, whereas the pH was significantly lowered from $6.80{\pm}0.01\;to\;3.42{\pm}0.02$. These results indicated that ginseng can be an appropriate material to prepare the fermentation product by several strains of LAB. Therefore we should further check whether probiotic ginseng product may have synergistic health benefits of both probiotics and ginseng to serve for vegetarians and lactose-allergic consumers.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.147-157
• /
• 2023

Centella asiatica extract is widely used as a raw material for cosmetics due to its various effects, but it is difficult to expect penetration into the skin due to its high molecular weight and low solubility. In order to solve these problems, lipid-based liposomes of various types were developed to increase skin absorption. Therefore, in this study, we tried to increase the skin absorption rate by preparing transfersomes using surfactants as edge activators in existing liposomes. Liposome and transfersomes containing Span 80 and Tween 20, 60, 80, and 85, respectively, were prepared using a high-pressure homogenizer, and we evaluated the particle size, polydispersity index, zeta potential, and skin absorption rate. As a result, there was almost no change in the physical properties of particle size, polydispersity index and zeta potential from 25 ℃ to 60 d, and the particle size of transfersomes containing Tween 20, 60, and 80 increased after 60 d at 45 ℃. Madecassoside, main substances of the Centella asiatica extract was used as an standard and madecassoside was measured and calculated when measuring the skin absorption rate using Franz diffusion cells. As a result, formulations containing Tween 20 were the most, whereas formulations containing Span 80 were the least. According to the skin absorption coefficient (Kp) value, all formulations showed 'very fast', and the absorption rate was similar or greater than that of liposomes, except for formulations containing Span 80. Through this, it was confirmed that the larger the HLB value of the nonionic surfactant, the smaller the particle size of the transfersome, and the increased skin absorption rate due to the increased flexibility of the vesicle membrane. Through this study, transfersome using surfactant as an edge activator can be expected to solve local skin problems not only as a cosmetic raw material or product, but also by increasing skin absorption.

• Analytical Science and Technology
• /
• v.19 no.3
• /
• pp.263-271
• /
• 2006

The levels of total PCBs, Co-PCBs and PCDD/Fs in the transformer insulation oil samples obtained using GC/ECD and HRGC/HRMS were ranged from N.D. to 77.3 ppm, from 0.0863 to 2.49 ppm and from N.D. to 0.00241 ppm, respectively. In terms of WHO-TEQ values, Co-PCBs and PCDD/Fs were ranged from 23.3 to 600 pgTEQ/g and from N.D. to 128 pgTEQ/g, respectively (${\Sigma}Co$-PCBs+PCDD/Fs concentration was calculated 24.4~728 pgTEQ/g). Although, the contribution of PCDD/Fs was below 12% in total TEQ concentration, it is suggested contamination of PCDD/Fs in transformer insulation oils. Among 10 samples, 4 samples showed higher concentration than 2 ppm (specific waste criterion of Korea) and Aroclor 1242, 1248, 1254 and 1260 was detected in samples as a single or mixture of Aroclor. It was shown reliable relationship between concentration of Co-PCBs and those of PCDD/Fs (p<0.003), however, was not shown between production year of transformer and concentration of PCBs. The distribution pattern of Co-PCB congeners showed that the ratios of mono-ortho substituted congeners were higher than non-ortho substituted congeners. Among that, PCB-118 congener was predominant. In addition, the OCDD congener was predominated in PCDD/Fs congeners as above 53%. Moreover, the congener pattern of Co-PCBs was similar to that of Aroclor as well as ambient air, which suggested that PCBs volatilization from transformer insulation oil affected the pattern of Co-PCBs in ambient air.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1346-1355
• /
• 2012

This study was carried out to investigate the characteristics of black jujube and Zizyphus jujube extracts during lactic acid fermentation. Both extracts were fermented using Lactobacillus fermentum YL-3. As a result, viable cell number rapidly increased until 24 hours, after which it gradually decreased. Before lactic acid fermentation, the $IC_{50}$ of black jujube, which was 0.014 mg/mL, was lower than that of Zizyphus jujube. Further, black jujube showed stronger antioxidant activity (374.21 mg AA eq/g) than Zizyphus jujube. Contents of total polyphenolics in both extracts were 15.46 mg/g and 13.61 mg/g, respectively, whereas contents of total flavonoids were 374.21 ${\mu}g/g$ and 64.25 ${\mu}g/g$. After lactic acid fermentation, there was no significant increase in DPPH or ABTS free radical scavenging activity. Total polyphenolic content of Zizyphus jujube decreased to 12.39 mg/g upon fermentation, whereas flavonoid content significantly increased to 291.58 ${\mu}g/g$. Further, polyphenolic and flavonoid contents of black jujube increased from 15.46 mg/g to 17.46 mg/g and from 374.21 ${\mu}g/g$ to 1,135.29 ${\mu}g/g$, respectively. These results demonstrate that 9-Times Steamed and Dried increased functional components. Especially, lactic acid fermented black jujube showed remarkably high antioxidant activity. These results confirm the potential use of lactic acid fermented black jujube as a valuable resource for the development of functional foods.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.50-55
• /
• 2013

Since 1 June 2012, it is prohibited to sell oilfish as a food material but there are still many illegal cases of selling oilfish as if it is tuna or grilled Patagonian toothfish. So it is absolutely crucial to construct the system to distinguish the real food material from oilfish. There are two sorts of oil fish called Ruvettus pretiosus and Lepidocybirium flavobrunneum involved in Percifomes order and Gempylidae class. 16S DNA gene region in mitochondria was selected to design the specific primers. For design species-specific primer, the theoretical experiment were performed for the sequences of R. pretiosus, L. flavobrunneum, Thunnus thynnus, Thunnus albacores, Makaira mitsukurii and Xiphias gladius, registered at the Gene bank from the National Centre for Biotechnology Information, using BioEdit 7.0.9.0. program. Through the analysis of the result from experiments, it was possible to design the 4 kinds of primers to distinguish R. pretiosus and L. flavobrunneum. As a comparison group, 3 kinds of tuna and 4 kinds of billfishes were selected and experimental verification was performed. As a result, for R. pretiosus and L. flavobrunneum, R.P-16S-006-F/R.P-16S-008-R and L.F-16S-004-F/L.F-16S-006-R primers were selected eventually and PCR condition was established. In addition, 178bp and 238bp of PCR products were confirmed from the established condition and non-specific band was not amplified among similar species. Therefore, the species-specific primers developed in this study would be very useful and used in various ways such as internet shopping mall and illegal distributions with fast and scientific results.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.590-596
• /
• 2015

Estimating potential of $CO_2$ emission reduction of non-capture $CO_2$ utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of $CO_2$ contained in the flue gas. For the estimating the $CO_2$ emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle $CO_2$ of 100 tons per day was performed, Also for the estimation of the indirect $CO_2$ reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall $CO_2$ emission was estimated as 48,862 ton per year based on the energy consumption for the production of $NaHCO_3$ ($7.4GJ/tNaHCO_3$). While for the NCCU technology, the direct $CO_2$ reduction through the $CO_2$ carbonation was estimated as 36,500 ton per year and the indirect $CO_2$ reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of $CO_2$ contained in the flue was energy efficient and could be one of the promising technology for the low $CO_2$ emission technology.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1474-1481
• /
• 2011

This study investigated the physicochemical characteristics of Korean wheat flour substituted for 0%, 15%, 30%, 45%, and 60% durum rimachinata wheat in order to develop a Korean wheat pasta suitable for consumer-preferred soft textures. The particles of Korean wheat that were less than 250 ${\mu}M$ were 87.03% of all particles, while 68.7% of durum rimachinata had particles more than 250 ${\mu}M$ in size. Durum rimachinata had more protein (13.84${\pm}$0.03) and ash (0.70${\pm}$0.02) than Korean wheat. In farinograph characteristics, water absorption, development time, stability, and weakness increased as the amounts of substituted Korean wheat flour increased. Also, the gelatinization characteristics of the amylograph exhibited an increase of gelatinization temperature and decrease in maximum viscosity. However, maximum viscosity was shown to be more than 550 B.U. until 30% of the substitution level of Korean wheat flour to durum rimachinata wheat. Also, it did not affect the texture of the noodle product. We could make pasta with softness and springiness with less than a 15% substitution level of Korean wheat flour due to similar characteristics in cooking properties such as weight, volume, water absorption, turbidity, and cooking loss when compared to the control. L and a values increased, and the b value decreased in color as substitution amounts of Korean wheat flour increased. The hardness and adhesiveness of cooking noodles was shown to be a low value at more than a 30% substitution level of Korean wheat flour, and springiness, gumminess, and chewiness all exhibited high values. In a sensory evaluation, overall acceptability was shown to have the highest score in control. More than 30% of substitution of Korean wheat flour showed high preferences. Therefore, 15% of the substitution level of Korean wheat flour could be adapted in dough and cooking properties for making pasta-substituted Korean wheat. However, a texture analyzer and sensory evaluation of cooked pasta was shown to have a good quality at more than 30% substitution level of Korean wheat flour.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.1
• /
• pp.68-76
• /
• 2017

Antioxidative capacities of Stachys sieboldii MIQ and 6-year-old ginseng powder were assessed after extraction with 80% ethanol, and their addition effects on quality characteristics of cookies were determined. Stachys sieboldii MIQ showed 3.12-fold higher total phenol content (TPC) and higher antioxidative capacities than ginseng based on higher values of 2,2-diphenyl-1-picrylhydrazyl radical scavenging capacity, ferric reducing antioxidant capacity, and Trolox equivalent antioxidant capacity (P<0.05). The 80% ethanol extract was then fractionated with $H_2O$ (Fr. I), 30% (II), 50% (III), 70% (IV), and 100% ethanol (V). Fractions of Stachys sieboldii MIQ extract showed 2.2-fold (Fr. I)~6.1-fold (III) higher TPC and higher antioxidative capacities than ginseng extract fractions. TPC was in the order of fractions III> II> I> IV> V for Stachys sieboldii MIQ extract while in the order of fractions I~III> IV~V for ginseng extract, assuming that Stachys sieboldii MIQ contained more phenolic compounds with higher polarity than ginseng. Addition of 5% and 10% Stachys sieboldii MIQ and ginseng powder increased spread ratio in cookies compared to 100% wheat flour, and 10% addition of Stachys sieboldii MIQ resulted in the darkest and most reddish cookies. In the sensory evaluation, cookies with 5% and 10% Stachys sieboldii MIQ received higher scores for taste preference and higher overall acceptability than ginseng or control cookies. Therefore, powder of Stachys sieboldii MIQ could impart more favorable sensory characteristics as well as higher antioxidative capacity than ginseng in bakery products.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.469-476
• /
• 2011

This study was conducted to evaluate the functional effects of adding oyster shell powder on the quality properties and storage stability of emulsion-type pork sausages to substitute phosphates as a curing agent. Seven treatments were prepared: T1 (Control), T2 (0.3% STPP), T3 (1.5% NaCl), T4 (1.5% NaCl + 0.5% whey protein), T5 (1.5% NaCl + 0.5% whey protein + 0.15% oyster shell powder), T6 (1.5% NaCl + 0.5% whey protein + 0.3% oyster shell powder), and T7 (1.5% NaCl + 0.5% whey protein + 0.5% oyster shell powder). Significant differences were observed for ash in the proximal analysis. Adding 0.5% oyster shell powder significantly increased pH values when compared to the other treatments. Pork sausages with 0.3% oyster shell powder had significantly improved water holding capacity and cooking loss. Adding oyster shell powder (0.15, 0.3, and 0.5%) resulted in significantly higher hardness, cohesiveness, springiness, and chewiness values than those in the other treatments. No significant differences were observed among treatments during 14 d of cold storage at $4^{\circ}C$.