• Science of Emotion and Sensibility
• /
• v.9 no.spc3
• /
• pp.243-249
• /
• 2006

There are many CAD commercial systems such as fabric design CAD for fabric designers and pattern design CAD including visual wearing system for garment designers. But there is no fabric design system for weaving factory, so the data base system related to the fabric design for weaving factory is needed. Therefore, in this study, as a preliminary study of the data base system for fabric design, easy decision of warp and weft densities according to the various yarn count, weave constructions and materials were surveyed through analysis of design plan for nylon and polyester fabrics from wearing factories.

• Journal of the Korean Society of Costume
• /
• v.57 no.1 s.110
• /
• pp.163-175
• /
• 2007

This study examines 74 pieces of textiles of Daegaya found in the Jeesan-dong Tomb and Saeng-cho Tomb, and analyzes their characteristics and weaving techniques. Dagaya is known to have produced ramie and hemp from bast fibers. The hemp textiles were all woven in plain weave, and the ramie textiles were woven either in plain weave or plain braid. The ramie textiles were slightly more dense compared to the hemp textiles, however, both had average densities between 0.92 to 0.93, showing that they are balanced plain weave textiles. It was also found that S twist threads were used in the production of the hemp and ramie textiles. The dyed textiles on iron remains were found to be the oldest textiles to use dying techniques for patterns. Silk textiles were woven in plain weave, twill weave, and leno weave. All of the silk were made with non-twisted thread. The densities were between 30 to 58.3 and the the density rates were 1.0 to 2.5 for plain weave silk, this showed that varieties of plain weaver created by different densities of warp and well. The average density of cho was $53.4{\times}22.5/cm^2$ the density rate was about 2.40, therefore warp was woven more dense compared to the weft. There were degummed and raw silk used in silk textiles, but most of them were found to be degummed thread.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.108-108
• /
• 2012

이전의 연구에서 기존의 ATY 장치에 ITY 노즐을 접목하여 개조한 사가공기로 제조한 탄성복합사를 자동차 시트용 트리코트 원단으로 편직하여 일광견뢰도가 우수한 염료를 선정하고 $125^{\circ}C$에서 염색하여야 견뢰도와 spandex의 물성을 저해하지 않음을 알 수 있었다. 폴리에스테르 탄성복합사의 염색성 평가에 이어 본 연구에서는 나일론 필라멘트 (70/24, Full-dull, 2ply사와 40D spandex 1ply사 복합)와 레이온사(75D, 1ply)를 투입하여 직물 원단(중량 216g/yd, 밀도 경사 78, 위사 52본/inch)을 제직한 후 2욕에서의 염색공정을 거칠 경우, 탄성복합사의 견뢰도와 물성에 미치는 영향을 조사하였다. 나일론, 레이온, 폴리우레탄의 3종 원단을 염색성 평가를 위하여 반응성염료로 먼저 레이온 부분을 염색한 후 산성염료로 나일론 부분을 염색하였으며, 이 때 spandex가 미치는 영향을 비교하기 위하여 spandex가 함유되지 않은 나일론, 레이온 복합 제직원단도 함께 염색한 후 견뢰도를 평가하였다. 또한, 레이온 부분은 CPB염색법과 제트염색기로 나누어 염색하여 염색기에 따른 인장강도와 인열강도를 평가하였다. 레이온 염색에는 셀룰로오스용 2관능기 반응성염료 3원색을 이용하여 khaki color로 combination염색하였으며, 나일론 부분에는 입자크기가 커서 견뢰도가 우수한 산성염료를 선정하여 combination염색한 후 냉수세하였다. 견뢰도를 비교한 결과, spandex가 포함된 탄성복합사 원단과 나일론과 레이온 만으로 제직된 원단 모두 세탁, 마찰, 물, 땀, 일광 견뢰도 모두가 4~5급으로 우수하여 spandex에 이염된 염료가 견뢰도에 미치는 영향은 없음을 확인하였다. 또한, 레이온 부분의 반응성염료 염색 시 CPB와 제트염색법의 두 가지 종류에 대한 인장강도와 인열강도 평가결과는 CPB 염색물이 제트염색물보다 약간 높게 나타났지만 3% 이내의 차이로 거의 차이가 없음을 나타내었다. 일반적으로 제트염색 시 원단은 로프상으로 이동하고, CPB염법은 확포상태 그대로 염색되기 때문에 제트염색 시 강도가 낮아지는 것으로 알려져 있으나, 본 연구에서는 탄성복합사를 경사, 위사 모두 사용함으로써 spandex가 신장하는 특성 때문에 강도의 저하가 없는 것으로 사료된다.

• Journal of Aerospace System Engineering
• /
• v.18 no.5
• /
• pp.81-89
• /
• 2024

Recently, both volumes and weights of antennas are increasing because of advancement of satellite missions. Research studies on mesh deployable antennas that can be highly stowable and lightweight are also increasing. When a deployable mesh antenna is subjected to repeated deployment tests on the ground, vibration of launch environments can cause slip between the antenna structure and the mesh fabric, resulting in failure to maintain the surface curvature of the antenna and Openning Per Inch (OPI). Such failure is the main cause of RF performance and mission capability degradation. Thus, studying a fastening technique to prevent slip between the antenna structure and mesh fabric is essential. This study proposed a Clamping fastening technique using rivets between the antenna structure and the mesh fabric. To evaluate the fastening efficiency of the Clamping fastening technique, tensile tests were conducted according to antenna structure type and rivet increment. Results were analyzed and fastening efficiency of the proposed clamping fastening technique was verified.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.165-174
• /
• 2011

Recent years have witnessed that IT-convergence technology has become the most important issue in the global market. Along with this trend, demand for PSS(i.e., Product-Service Systems) design has been rapidly increased in the smart clothing market. A case of the PSS design research, this study aimed to identify optimum conditions for weaving of POF-based flexible textile display(abbreviated as "PFTD") for mountaineer wear with safe-guard function regarding luminescent properties. Based on the findings regarding the optimum weaving condition of PFTD, several designs of mountaineer wear were suggested in this study. A total of 15 PFTD samples were prepared under various weaving conditions of weave structures and density of POF, and the luminance values of each sample were measured. As the results, the types of PFTD with structures and density of 'satin 3:1', 'satin 2:1', 'twill 3:1' and 'twill 2:1' indicated relatively higher luminescence. And based on the results and recent sports fashion trends, two suited mountaineering wears applying PFTD were illustrated in this study.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.149-156
• /
• 2021

The mechanical properties of a woven fabric made of SiC (silicon carbide) fibers were determined in this study using the KES-FB system. The woven fabric is used in high heat settings above 1500℃. Composite spun yarns were used to create SiC fibers. By analyzing the wearing properties, we studied the prospect of using the textiles as fire-retardant work clothes. Mechanical properties determine the wearing attributes. Therefore, the tensile linearity (LT), tensile resilience (RT), and shear stiffness (G) values of the fabric varied according to the yarn type (filament or spun yarn). The thickness, weight per square meter, and density of the fabric were found to have an effect on the shear hysteresis (2HG) and compression resilience (RC) values. In terms of wearable clothing qualities, the fabric qualities of the SiC composite yarn demonstrated the highest ratio of compressive energy to thickness (WC/T), which indicates bulkiness. The fabric manufactured from SiC composite yarns passed the KFI criteria for carbonation length and cumulative flame time in the flame-retardant test. Therefore, we discovered that the material can be used as a fire-resistant work cloth.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.141-148
• /
• 2012

This study investigated the structural coloration and fabric hand of the caustic reduced fabrics for emotional garment using structural color yarns, which was spun by 37 alternating nylon and polyester layers capable of producing basic colors using biomimetic technology. The colorations of the three kinds of structural color yarns were confirmed using multi angle spectro-photometer, and their triangular cross sections composed with 37 alternating nylon and polyester layers were measured using SEM and were discussed with layer length in relation with coloration and spinning conditions were also set up. The apparent color difference and reflectance of the three kinds of fabrics with different density and weave pattern were analysed as ranging from 400nm to 700nm. The optimum fabric structural design which is made by warp and weft densities(194ends/in ${\times}$ 105picks/in) and caustic reduction condition by $100^{\circ}C$ temperature and 60minutes with NaOH, 20g/l solution were decided through analysis of the mechanical properties and fabric hands of these three kinds of fabrics treated with 3 kinds of the caustic reduction conditions. And it was shown that the rate of caustic reduction was increased from 13% to 23% with increasing temperature and time of caustic reduction. The extensibility, bending rigidity and shear modulus of caustic reduction treated fabrics were decreased by treatment of caustic reduction, on the other hand fabric compressibility was increased. And it was shown that the hand value of specimen number one which was treated with temperature $100^{\circ}C$ and time 60minute was the best and the hand of this fabric was better than that of Morpho $fabric^{(R)}$ made by Teijin co. Japan.