• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.213-216
• /
• 2000

퍼지제어기를 실제 플랜트에 적용할 경우, 모델링 오차와 플랜트에 대한 관련지식의 부족으로 만족할 만한 제어 결과를 기대하지 못한다. 이러한 경우 제어기 성능을 향상시키기 위해 제어인자를 다시 조정해야 하고, 이 조정과정은 시행착오방법으로 수행되기 때문에 많은 시간과 비용을 필요로 한다. 본 논문에서는 퍼지 논리를 사용하여 스케일링 계수를 자동조정하는 퍼지 레귤레이터를 제안하였다. 스케일 계수의 출력 범위와 오차, 오차 변화량 따라 퍼지 레귤레이터는 적절한 스케일링 계수값을 결정함으로써 퍼지제어기의 성능을 향상시키게 된다. 제안한 방법의 타당성을 확인하기 위해 2차 플랜트에 적용하여 모의실험을 수행하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.3
• /
• pp.317-329
• /
• 1996

By describing the floor slab of a radiant heating system as a one dimensional transient heat exchanger problem, a dynamic analysis model to incorperate with TRNSYS program was developed and their results were compared with experimental results. Results showed that the both of TPOC(Two Parameter On-off Control) and TPSC(Two Parameter Switching Control) method using room air temperature and floor surface temperature as the control parameters does not maintain room air and floor surface temperature exactly at the setting temperatures. But TPSC method is a better candidate for the temperature regulations of room air and floor surface temperature than TPOC method which can keep on the upper and lower limit temperature according to outside temeperature and wall structure etc. And better thermal circumstance can be given by TPSC method than On-off and TPOC method and the overheating which can be occured at the radiant floor heating system with on-off heating control will be reduced.

• Progress in Medical Physics
• /
• v.2 no.1
• /
• pp.17-28
• /
• 1991

Generally, it is an accurate radiation measurement technique for processors fo thermoluminescent dosimenters(TLDs) to characterize each element they use by producing element correction factors(FCFs). TLDs are classified into three groups such as reference. control, and field TLDs. Reference TLDs are used only for the production of ECFs for the control and field TLDs. They are kept locked in a safe place except when it is necessary to use a subset of them to produce ECFs for the control and field TLDs. The ECF of a given element is a measure of the response of the element relative to the mean response of an arbitrarily selected group of reference elements. As TLDs are used in the field, their relative responses to radiation might be decreased due to muliple readings and physical abuse. Therefore, the producditon of ECFs are performed initially and periodically during the field use. This element correction method provides an excellent tool to examine new TLDs and to monitor the reliability of old TLDs. This paper discuss the 10 step procedures developed to produce and examine ECFs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1456-1463
• /
• 1999

This paper describes the measurement system of antenna factor using standard antenna method in OATS(Open Area Test Site) of KRISS(Korea Research Institute of Standards and Science) and methods for reducing an environmental noise affecting antenna factor. The range of measurement frequency is 30 - 1000 MHz, all control and data acquisition were done by computer automatically. Measurement results of antenna factors are presented, total uncertainty of antenna factor is $\pm$1 dB.

• Journal of Digital Convergence
• /
• v.10 no.2
• /
• pp.225-229
• /
• 2012

A reformer for a small fuel cell system is an apparatus which converts hydrocarbon fuel into hydrogen-rich gas. Among many indices of a reformer, the most crucial index of a reformer is CO concentration in the off-gas out of reformer which must be controled under 5ppm for the efficiency and performance of a system. This paper suggests the criteria of a reformer operation for the stability of a reformer in a fuel cell system by deducing crucial indices and improving processes. The six-sigma technique was applied to verify the optimum control and operation of a reformer of a fuel cell combined heat and power system. The result of temperature control of each parts of a reformer system is the concentration of CO which is the most important factor for the operation of a fuel cell system. The temperature of the parts of a reformer, MTS, LTS and Prox, were controled so that the concentration of CO.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.8-12
• /
• 2015

Non-esterified bio-diesel fuel saves cost by no esterified process and its performance was more similar to diesel oil than esterified bio-diesel fuel when the fuel blended 95% diesel oil and 5% it was used on diesel engine with electronic control system. A performance optimization is necessary for application of non-esterified bio-diesel fuel blended with diesel oil 95% on the latest diesel engine. In this study, test using fractional factorial design was accomplished at 25% and 50% partial load in order to evaluate influence of controllable 6 factors on responses such as specific fuel consumption, nitrogen oxides and coefficiency of variation of indicated mean effective pressure as basic experiment for performance optimization of this fuel. It is cleared that the injection timing and common rail pressure of 6 factors are mainly effective and its effect level is different according to load.

• Radiation Oncology Journal
• /
• v.18 no.4
• /
• pp.226-232
• /
• 2000

Purpose :This study was performed to find out the prognostic factors affecting local control in early glottic cancer treated with radiation therapy alone. Materials and Methods :We analysed 37 patients of histologically confirmed early glottic cancer treated at Chonnam National University Hospital between July Im and December 1995, retrospectively. Age of patients ranged from 30 to 73 years (median; 59 years). Thirty-five (95$\%$) patients were male. Histological type was all squamous cell carcinoma. According to the staging system of 1997 American Joint Committee on Cancer, 37 patients were restaged as follows: Tla; U (73$\%$), Tlb; 3 (8$\%$), 72: 7 (19$\%$). Radiation therapy was done using 6 MV X-ray of linear accelerator The range of total radiation dose delivered to the glottic lesion was between 5,040 cGy and 7,020 cGy (median; 6,600 cGy). Median follow-up period was U months. local control rates were calculated by Kaplan-Meier method. Generalized Wilcoxon test was used to evaluate the difference of control rates between comparable groups. Multivariate analysis using Cox proportional hazard model was done to find out prognostic factors affecting local control. Results:5 year survival rate of 37 patients was 89$\%$. Local control rate of 37 patients was 74$\%$ in 5 years. We included age, 7-stage, anterior commissure involvement, fraction size, total radiation dose, treatment time of radiotherapy as potential prognostic factors in univariate and multivariate analysis. As a result, treatment time had statistical significance in local control rate in both univariate (p=0.026) and multivariate (p=0.017) analysis. Complication was not recorded except one patient with hypothyroidism. Conclusion :This study revealed that overall treatment time of radiation was a significant factor affecting local control rate.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.236-241
• /
• 1996

울진 3,4호기 유출관계통의 과도현상을 평가하기 위해서 발전소 과도해석용 코드인 Modular Modeling System(MMS) 코드를 이용하여 수력학적 현상을 모사하고 유출관제어밸브 및 배압제어밸브의 특성, 이들 밸브들의 제어특성 및 밸브들의 운전특성등을 고려하여 분석을 수행하였다. 분석결과 배압제어밸브 제어기 제어변수의 적절한 선정이 계통의 과도현상에 매우 큰 영향을 미치고 있기 때문에 배압제어기 제어변수 선정이 계통의 과도현상 완화에 매우 중요한 인자임을 알 수 있었고, 배압제어밸브의 Stroke 속도변화가 유출관계통의 과도현상에 상당한 영향을 미치고 있음을 알았다. 또한 배압제어밸브의 특성에 따른 유출관계통의 과도현상을 분석한 결과 유출관제어밸브의 운전에 따라 배압제어밸브 특성이 결정됨을 알았다. 결과적으로 유출관계통의 과도상대를 적절하게 제어하기 위해서는 밸브의 특성, 밸브의 Stroke 속도 및 배압제어벨브 제어기 제어변수등의 적절한 선정이 필수적으로 계통설계단계에서 고려되어야 한다고 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.507-512
• /
• 1987

Input/output equations in SDINS IMU are modeled from survey of IMU data flow. Given without precise equipments which can generate acceleration and angular velocity, a simple method is derived to calibrate the parameters of i/o eqijations. Also in order to upgrade ins performance, methods to estimate variant magnitudes of time variant parameters are surveyed.

• Journal of KSNVE
• /
• v.13 no.3
• /
• pp.153-161
• /
• 2003