• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.356-362
• /
• 2018

Hot pepper is a kind of seasoning vegetables, which is a major item in the Korean vegetable market. Since the use of hot pepper is processed into pepper powder, which is a powder form of dried hot pepper, improvement of quality and productivity of dried hot pepper is important. Therefore, this experiment was conducted to suggest proper drying method by comparing the changes of hot pepper powder ingredients considering production cost according to the drying method. As a drying method, we used sun drying and heat drying which are widely used in practice. We also compared the productivity and quality of dried hot pepper by applying a dehumidifying drying method using a dehumidifier. Drying rate of hot pepper was highest of 85.1% at heat drying. Accordingly moisture content of hot pepper powder was lowest of 13.5% at heat drying. The American Spice Trade Association (ASTA) color value, which influenced the coloring of red pepper, showed higher in heat drying and dehumidified drying treatment than the sun drying treatment. The content of capsaicinoids was higher at sun drying treatment than that of at both heat drying and dehumidified drying treatments. The content of sugar was higher at heat drying and dehumidified drying treatment where drying time was relatively short than that of sun drying treatment. Also, there was no significant difference in sugar content between the two treatments. The production cost of dried hot pepper with dehumidified drying was 9.9% more efficient than heat drying. Through this study, it was found that heat and dehumidified drying method were effective in increasing sugar content and coloring of hot pepper powder. In order to improve the capsaicinoid content of red pepper, it is considered that appropriate drying temperature and drying time should be added in the process of heat drying and dehumidified drying.

• Clean Technology
• /
• v.14 no.1
• /
• pp.40-46
• /
• 2008

The dehumidifiers were prepared by the impregnation of the zeolites such as MCM 48, USY, beta on the silica ceramic paper. Their capacities for $H_2O$ absorption and regeneration of the bed were tested in a fixed bed reactor system. The $H_2O$ absorption capacities of the dehumidifiers impregnated with the zeolites were $1.5{\sim}2$ times higher than those without the zeolites. Especially, the humidifier using MCM 48 and colloidal silica showed an excellent capacity (42.1g $H_2O/g$ absorbent). It was found that the $H_2O$ absorption capacities of the dehumidifiers were improved because the amount of silica gel, the main component in absorbing $H_2O$, increased due to the large surface area and pore volume of the zeolites. In addition, $H_2O$ was easily desorbed from the dehumidifiers with zeolites at $80^{\circ}C$ of regeneration temperature and the desorption amount of $H_2O$ was the same as that absorbed. It was confirmed that the $H_2O$ absorption capacities of the dehumidifiers impregnated with zeolite were maintained without deactivation through the repeated cyclic experiments.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.65-73
• /
• 2019

In this study, flow analysis and fluid-solid interaction analysis were conducted on a hollow fiber membrane module used for analysis of dehumidification characteristics. To ensure the reliability of the flow analysis results, the dehumidification experiment was performed under the temperature of 30℃ and relative humidity of 30% RH. The results of the dehumidification experiments were compared with the flow analysis results. The results of dehumidification experiments and flow analysis had a difference of approximately 5%. A 1-Way fluid-solid interaction analysis with various materials was conducted. From the results, it was found that the baffle with the largest shape deformation (polyethylene material) was subjected to 2-way fluid-solid interaction. The analysis of fluid flow and dehumidification characteristics were analyzed according to the shape deformation of the baffle.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.7
• /
• pp.630-638
• /
• 2004

Liquid desiccant dehumidification systems have the ability to provide efficient humidity and temperature control while saving the electrical energy requirement for air conditioning as compared to a conventional system. The dehumidifier and the regenerator form the heart of this system. The latent part of the cooling load is overcome using liquid desiccant. The model regenerator has been designed to study the absorption characteristic of the aqueous triethylene glycol (TEG) solution which is in the flow range from 20 to 50 LPM. Also, this system designed that was able to change the height of the regenerator and dehumidifier. Because the effect of performance have different result according the height. The effect of performance factors of the regenerator with inlet solution flow rate, air flow rate, solution concentration, solution temperature, brine temperature, air temperature and inlet air relative humidity have been analyzed. Data obtained are useful for design guidance and performance analysis of the hybrid air conditioning system.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.623-628
• /
• 2009

Desiccant based air conditioning system offers a promising alternative to conventional one using vapour compression refrigeration for energy saving and greenhouse gas reduction. It is a heat driven cycle which has high potential for the use of low grade heat source such as the waste heat from the cogeneration plant or the solar thermal energy. In this study, the cooling performance of a desiccant cooling system incorporating a regenerative evaporative cooler was characterized in various operation conditions through numerical simulation. The cooling capacity and COP were evaluated at various outdoor conditions, regeneration temperatures, and supply flow rates. Based on the performance characteristics, the optimal control scheme was discussed to minimize the cooling cost at part load condition.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.66-71
• /
• 2019

In this study, flow analysis and dehumidification experiments were performed on hollow fiber membrane module to confirm the dehumidification characteristics for its different configurations. The CFD for the three different models was conducted using $30^{\circ}C$ temperature and 30%RH inlet humidity for quantitative analysis. Each model has different shape parameters i.e. the number of baffles. Comparison between flow analysis results and dehumidification experiment results revealed a percentage error of about 5%. The difference in relative humidity between the inlet and outlet for each model was calculated using flow analysis data. It was established that the difference in relative humidity of the inlet and outlet for the refined model with three baffles was highest among the three modeled modules of hollow fiber membrane module, i.e. around 9%.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.05a
• /
• pp.167-172
• /
• 2002

근년 들어 냉난방 효율의 향상과 에너지의 효율적인 이용 측면에서 건물의 밀폐성이 증가함과 동시에 쾌적한 주거환경 및 작업 환경을 위해 실내 환경 조건의 조절에 대한 관심이 높아짐에 따라 온도와 습도 조절의 필요성이 증대되고 있다. 쾌적한 환경을 위해 은도도 중요한 요소 중 하나지만 온도보다 습도에 의한 유해성이 더 크게 작용하기 때문에 습도 조절에 대한 필요성이 증대되고 있다.(중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.05a
• /
• pp.161-163
• /
• 2005

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.27 no.6
• /
• pp.523-532
• /
• 1998

우리나라의 여름철 기후는 장마라는 일정기간의 우기와 더불어 고온 다습한 특성을 가지고 있다. 다습한 환경은 주거환경에서 곰팡이 균이 번식하는데 좋은 조건이 되며, 산업환경에서는 각종 기자재 및 원자재를 부식시키고, 일부 작업 공정을 어렵게 하는 문제점을 유발한다. 반면, 온도는 높지만, 습도가 낮은 중동 사막지역의 경우는 수 천년 동안 미이라가 훌륭하게 보존되어 왔다. 따라서 상대적으로 고습 기후 조건을 갖는 지역은 저습 기후 지역에 비하여 더 큰 습도제거 대책이 필요하게 되는 불리함이 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.609-614
• /
• 2014

In this research, results of measuring temperature and relative humidity of underground-air-heat in Jeju showed $15{\sim}18^{\circ}C$ and 70~80% each which are somewhat high compare to other regions. So the Multi-effect dehumidifying and heating Heat Pump system which has merged functions of dehumidification and heating is made to solve this problem mentioned previously. When the suction air was $15^{\circ}C$ with 60% humidity, the outcome was 1.70 on $COP_h$ and 1.797(kg/h) on total amount of dehumidification, and also showed 1.87 $COP_h$ with 1.87 total amount of dehumidification under the condition of $20^{\circ}C$ and 80% humidity of suction air. Furthermore, $COP_h$ showed increased number which is 1.87 and also total amount of dehumidification increased which was 3.269(kg/h). The highest COP can be achieved at $17^{\circ}C$ and 70% relative humidity condition.