• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.5 no.2
• /
• pp.158-165
• /
• 2002

Purpose: We designed this retrospective study to establish the incidence of diagnosic delay in children diagnosed with acute appendicitis and to identify associated factors with delayed diagnosis and its impact on the clinical course. Methods: All cases of children under 15 years of age who underwent appendectomy from 1996 to 2001 at Gangneung Asan Hospital were reviewed. We reviewed signs and symptoms, type of health professional first contacted, the advice given by the health professional and a history of appendicitis in first degree relatives. Diagnostic period is the time elapsed between first complaints and definitive diagnosis. Delay was defined as diagnostic period exceeded the 48 hours. Postoperative course and complications were also reviewed. Results: Incidence of diagnostic delay differed by whether diarrhea and fecalith on X-ray were present. Also children whose parents were advised to observe them at home were more likely to have a diagnostic delay. In almost half of the cases in delayed group, initial diagnosis was not acute appendicitis but gastroenteritis. The perforation rate in non-delayed group was 22%, whereas 87% in delayed group. The delayed group showed a higher number of postoperative complication and a longer hospitalization period. Conclusions: Diarrhea with abdominal pain and fever in children should not be dismissed as gastroenteritis, respiratory infections or other common disorders. Our study suggests that physicians have a responsibility to prevent diagnostic delay and resultant perforation of acute appendicitis in children by having a high index of suspicion about acute appendicitis.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.456-461
• /
• 2010

A study was conducted to investigate the effect of topophysis, and uniting method of rootstock and scion on rooting and subsequent growth of stenting-propagated cut rose ($Rosa$ $hybrida$ Hort.) in an effort to develop an efficient stenting propagation method for domestic rose cultivars. Four cultivars used in this study were two standard type cultivars 'Sweet Yellow' and 'Hanmaum', and two spray type cultivars 'Chelsi' and 'May'. Scions were grafted on cuttings of a rootstock $Rosa$ $indica$ 'Major'. The stenting-propagated scion-rootstock unions were planted in rockwool cubes ($50{\times}50{\times}50mm$, Delta, Grodan, Denmark) and were placed in a graft-take chamber for five days before being placed on misted greenhouse beds. The rootstock was removed of all leaves and nodes. Both the base of scions and top of stocks were simultaneously cut at a $45^{\circ}$ angle for grafting. Scions were prepared as single node cuttings, each with a five-leaflet leaf. Three positions of topophysis used were 7-9th (top), 4-6th (middle), and 1st-3rd (bottom) nodes from the stem base. Four uniting materials used were tube, tube + parafilm wrap, tube + clothespin, and clothespin. Rooting and growth were affected by the topophysis and cultivar. The best topophysis for rooting was 7-9th (top) nodes in all cultivars. Topophysis affected percent rooting, and number of roots, length of the longest root, and but not weight, shoot length and graft-take. Rooting and growth were affected by the uniting method and cultivar. Tube uniting method generally showed higher percentage graft-take, percent rooting, and number of roots than other methods. However, rootstock and scion union was not complete in this treatment. On the whole, the greatest rooting and subsequent growth of stenting-propagated plants were found in the tube + clothespin method. Except 'Sweet Yellow', rooting and growth were not adequate in the clothespin method. The results suggested that a tube + clothespin method was the most effective, and this method may be used as a substitute to save labor compared to a tube + parafilm wrap method which is currently being used in commercial nurseries.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.12
• /
• pp.1622-1627
• /
• 2007

This study was undertaken to evaluate the effects of chlorine dioxide on reducing E. coli O157:H7 and L. monocytogenes on broccoli served in foodservice institutions. Broccoli samples inoculated with $10^6$ CFU/mL of E. coli O157:H7 and L. monocytogenes were treated with chlorine dioxide. Treatments with 5, 10, and 20 ppm for 1, 5, and 10 min were not sufficient in controlling E. coli O157:H7 on broccoli. L. monocytogenes were effectively reduced by $2.19{\sim}2.48log\;CFU/g\;and\;3.31{\sim}3.87log\;CFU/g$ with 10 and 20 ppm chlorine dioxide for 1, 5, and 10 min treatment, respectively, compared with the control. E. coli O157:H7 and L. monocytogenes population were significantly negatively correlated with concentration and treatment time of chlorine dioxide. These results show that the use of chlorine dioxide was effective in sanitizing L. monocytogenes on broccoli and the level of concentration was more associated with populations of E. coli O157:H7 and L. monocytogenes than treatment time of chlorine dioxide on broccoli.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.342-349
• /
• 2019

Purpose: The purpose of this study was to retrospectively investigate the survival and success rate of implant-supported fixed prosthesis according to the materials in the posterior area. Other purposes were to observe the complications and evaluate the factors affecting failure. Materials and methods: Patients who had been restored implant prosthesis in the posterior area by the same prosthodontist in the department of prosthodontics, dental hospital, Chonbuk National University, in the period from January 2011 to June 2018 were selected for the study. The patient's sex, age, material, location, type of prosthesis and complications were examined using medical records. The KaplanMeier method was used to analyze the survival and success rate. The Log-rank test was conducted to compare the differences between the groups. Cox proportional hazards model was used to assess the association between potential risk factors and success rate. Results: A total of 364 implants were observed in 245 patients, with an average follow-up of 17.1 months. A total of 5 implant prostheses failed and were removed, and the 3 and 5 year cumulative survival rate of all implant prostheses were 97.5 and 91.0, respectively. The 3 and 5 year cumulative success rate of all implant prostheses were 61.1% and 32.9%, respectively. Material, sex, age, location and type of prosthesis did not affect success rate (P>.05). Complications occurred in the order of proximal contact loss (53 cases), retention loss (17 cases), peri-implant mucositis (12 cases), infraocclusion (4 cases) and so on. Conclusion: Considering a high cumulative survival rate of implant-supported fixed prostheses, regardless of the materials, implant restored in posterior area can be considered as a reliable treatment to tooth replacement. However, regular inspections and, if necessary, repairs and adjustments are very important because of the frequent occurrence of complications.

• Korean Journal of Food Science and Technology
• /
• v.53 no.6
• /
• pp.749-755
• /
• 2021

The objective of this study was to investigate the physicochemical properties of rice starch extracted from stale rice using alkaline steeping (AKL) and improved enzymatic digestion (iENZ) methods. The crude protein content (0.5-0.7%) of stale rice starch (SRS) was less than 1% by iENZ, but not so when measured by the existing ENZ methods. SRS is an intermediate amylose rice starch. AKL-SRS and iENZ-SRS exhibited typical A-type crystal packing arrangements with similar relative crystallinities. iENZ-SRS showed higher gelatinization onset and peak temperatures with a narrower gelatinization temperature range, compared to those of AKL-SRS, indicating that iENZ annealed SRS. Thus, iENZ-SRS exhibited lower swelling power and solubility, and higher pasting viscosities with delayed viscosity development. Overall, the use of stale rice as a rice starch source could make economical production of rice starch possible, and iENZ may diversify rice starch characteristics, which expands the utilization of rice starch in food and non-food industries.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.102-115
• /
• 2014

The stamped earth method is a typical ancient engineering technique which consists of in-filling wooden frame with layers of stamped earth or sand. This method has been universally used to construct earthen walls and buildings, etc. The purpose of this article is to understand the construction method and principles of the stamped earthen wall through analysis of various construction techniques of Pungnaptoseong Fortress(Earthen Fortification in Pungnap-dong). First of all, the ground was leveled and the foundations for the construction of the earthen wall were laid. The underground foundation of the earthen walls was usually constructed by digging into the ground and then in-filling this space with layers of mud clay. Occasionally wooden posts or paving stones which may have been used to reinforce the soft ground were driven in. The method of adding layers of stamped earth at an oblique angle to either side of a central wall is the most characteristic feature of Pungnaptoseong Fortress. Even though the traces of fixing posts, boards, and the hardening of earth - all signatures of the stamped earth technique - have not been identified, evidence of a wooden frame has been found. It has also been observed that this section was constructed by including layers of mud clay and organic remains such as leaves and twigs in order to strengthen the adhesiveness of the structures. The outer part of the central wall was constructed by the anti-slope stamped earth technique to protect central wall. In addition a final layer of paved stones was added to the upper part of the wall. These stone layers and the stone wall were constructed in order to prevent the loss of the earthen wall and to discharge and drain water. Meanwhile, the technique of cementing with fire was used to control damp and remove water in stamped earth. It can not be said at present that the stamped earth method has been confirmed as the typical construction method of Korean ancient earthen walls. If we make a comparative study of the evidence of the stamped earth technique at Pungnaptoseong Fortress with other archeological sites, progress will be made in the investigation of the construction method and principles of stamped earthen wall.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.112-131
• /
• 2009

The Trikaya Banner Painting in the Suta-sa Temple at Hongcheon-gun, Gangwon-do draws attention as it was painted not on flax but on paper, and used the water color painting technique on the sketch rather than the deep color painting technique, which is most common in Buddhist paintings created during the Chosun Dynasty. Nevertheless, there is not any information on the creation of the Trikaya Banner Painting in the painting record on the painting, in Sutasasajeok(壽陀寺史蹟), or in Sutasagogirok(壽陀寺古記錄), so it is uncertain when the painting was created. Furthermore, because it was not drawn by the deep color painting technique, it has been difficult to compare it with other banner paintings. For these reasons, the Trikaya Banner Painting has been studied little except brief introduction. In recent preservation treatment that removed multiple-layered paper from the back of the painting, however, an inked inscription written on Korean paper 118cm high and 87.5cm wide was discovered on the back. It is a kind of placard notifying a number of acts prohibited in order to follow Buddha's teachings correctly, and was found to have been written on April 15, 1690. The inked inscription is a very valuable material for estimating the creation date of the Suta-sa Trikaya Banner Painting, and provides crucial clues for approaching the contents and nature of the painting more precisely. When the image, form, and style of the Suta-sa Trikaya Banner Painting were examined and its creation date was estimated based on the inked inscription, first, the painting is presumed to have been created in around 1690 as suggested by 'the placard' attached on the back instead of a painting record. Second, the painting is highly likely to be the first standing Trikaya banner painting showing the basic icons of Trikaya banner paintings in the Chosun Dynasty since the Trikaya Banner Painting in the Gap-sa Temple in Gongju (1650). Furthermore, considering the shape of the Trikaya in the painting, screen composition, background treatment, solemn and affectionate facial expression, harmonious and adequate body proportion, etc., the painting is believed to have had a considerable influence not only on Trikaya banner paintings of similar style in the 18thcentury but also on deep-color Trikaya banner paintings in the 19thcentury. Third, although the Suta-sa Trikaya Banner Painting is not acompleted work but a sketch, it exhibits the typical water color painting technique in which the strokes are clearly visible. Thus, it is considered highly valuable in understanding and analyzing stroke styles and in studying the history of Buddhist paintings. As there are not many extant banner paintings of the same style in form and expression technique as the Suta-sa Temple Trikaya Banner Painting, this study could not make thorough comparative analysis of the work, but still it is meaningful in that it laid the ground for research on standing Trikaya banner paintings in the 18thand 19thcenturies in the Chosun Dynasty.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.121-142
• /
• 2023

As the number and weight of imported food are steadily increasing, safety management of imported food to prevent food safety accidents is becoming more important. The Ministry of Food and Drug Safety conducts on-site inspections of foreign food facilities before customs clearance as well as import inspection at the customs clearance stage. However, a data-based safety management plan for imported food is needed due to time, cost, and limited resources. In this study, we tried to increase the efficiency of the on-site inspection by preparing a machine learning prediction model that pre-selects the companies that are expected to fail before the on-site inspection. Basic information of 303,272 foreign food facilities and processing businesses collected in the Integrated Food Safety Information Network and 1,689 cases of on-site inspection information data collected from 2019 to April 2022 were collected. After preprocessing the data of foreign food facilities, only the data subject to on-site inspection were extracted using the foreign food facility_code. As a result, it consisted of a total of 1,689 data and 103 variables. For 103 variables, variables that were '0' were removed based on the Theil-U index, and after reducing by applying Multiple Correspondence Analysis, 49 characteristic variables were finally derived. We build eight different models and perform hyperparameter tuning through 5-fold cross validation. Then, the performance of the generated models are evaluated. The research purpose of selecting companies subject to on-site inspection is to maximize the recall, which is the probability of judging nonconforming companies as nonconforming. As a result of applying various algorithms of machine learning, the Random Forest model with the highest Recall_macro, AUROC, Average PR, F1-score, and Balanced Accuracy was evaluated as the best model. Finally, we apply Kernal SHAP (SHapley Additive exPlanations) to present the selection reason for nonconforming facilities of individual instances, and discuss applicability to the on-site inspection facility selection system. Based on the results of this study, it is expected that it will contribute to the efficient operation of limited resources such as manpower and budget by establishing an imported food management system through a data-based scientific risk management model.

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.99-107
• /
• 2024

Along with economic growth and industrial development, there is an increasing demand for various electronic components and device production of semiconductor, SMT component, and electrical battery products. However, these products may contain foreign substances coming from manufacturing process such as iron, aluminum, plastic and so on, which could lead to serious problems or malfunctioning of the product, and fire on the electric vehicle. To solve these problems, it is necessary to determine whether there are foreign materials inside the product, and may tests have been done by means of non-destructive testing methodology such as ultrasound ot X-ray. Nevertheless, there are technical challenges and limitation in acquiring X-ray images and determining the presence of foreign materials. In particular Small-sized or low-density foreign materials may not be visible even when X-ray equipment is used, and noise can also make it difficult to detect foreign objects. Moreover, in order to meet the manufacturing speed requirement, the x-ray acquisition time should be reduced, which can result in the very low signal- to-noise ratio(SNR) lowering the foreign material detection accuracy. Therefore, in this paper, we propose a five-step approach to overcome the limitations of low resolution, which make it challenging to detect foreign substances. Firstly, global contrast of X-ray images are increased through histogram stretching methodology. Second, to strengthen the high frequency signal and local contrast, we applied local contrast enhancement technique. Third, to improve the edge clearness, Unsharp masking is applied to enhance edges, making objects more visible. Forth, the super-resolution method of the Residual Dense Block (RDB) is used for noise reduction and image enhancement. Last, the Yolov5 algorithm is employed to train and detect foreign objects after learning. Using the proposed method in this study, experimental results show an improvement of more than 10% in performance metrics such as precision compared to low-density images.

• Journal of Nutrition and Health
• /
• v.57 no.1
• /
• pp.1-15
• /
• 2024

Purpose: This study aimed to develop a comprehensive tool for assessing dietary guideline adherence among older Korean adults, focusing on the domains of food and nutrient intake, eating habits, and dietary culture. Methods: Candidate items were selected through a literature search and expert advice. The degree of adherence to dietary guidelines was then evaluated through a face-to-face survey conducted on 800 elderly individuals across five nationwide regions. The items for dietary guideline adherence evaluation tool were selected through exploratory factor analysis of the candidate items in each of the three areas of the dietary guidelines, and construct validity was verified by performing confirmatory factor analysis. Using the path coefficient of the structural equation model, weights were assigned to each area and item to calculate the dietary guideline adherence score. A rating system for the evaluation tool was established based on national survey results. Results: A total of twenty-eight items were selected for evaluating dietary guideline adherence among the elderly. Thirteen items related to food intake, seven to eating habits, and eight to dietary culture. The average score for dietary guideline adherence was 56.9 points, with 49.8 points in the food intake area, 63.2 points in the eating habits area, and 58.6 points in the dietary culture area. Statistically significant correlations were found between dietary guideline adherence scores and food literacy (r = 0.679) and nutrition quotient scores (r = 0.750). Conclusion: The developed evaluation tool for dietary guideline adherence among Korean older adults can be used as a simple and effective instrument for comprehensively assessing their food and nutrient intake, dietary habits, and dietary culture.