• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.459-465
• /
• 2018

Of the many factors that affect the clinical outcomes of orthopedic surgery, the surgical procedure is the most important. Robotics have been developed to perform the surgical procedures more accurately and consistently. Robotic surgical procedures in the orthopedic field were developed 20 years ago. Some designs of surgical robots have disappeared due to practical problems and complications, and an another design of surgical robots is emerging. To date, the use of robot surgery in arthroplasty is still controversial in terms of the clinical outcomes, practicality, and cost-effectiveness, even though it has been reported to be effective in the alignment and positioning of components in the field of artificial joints. Early robotic surgery was based mainly on active robot surgery according to the scheduled operation without the intervention of the operator. Recently the semi-active system of robotic surgery has been introduced. In a semi-active system, the robot constrains the surgeon to a haptic boundary defined by the computer based on the 3-dimensional imaging preoperative plan, and the operator can change the preoperative plan through real-time feedback during operation.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.2
• /
• pp.103-116
• /
• 2021

The use of 3-dimensional (3D) printing is becoming more common, and its use is increasing in the orthopedic surgery. Currently, there are four major methods of using 3D printing technology in orthopedic surgery. First, surgical planning simulation using 3D printing model; second, patient-specific surgical instruments; third, production of customized prosthesis using 3D printing technique; fourth, patient-specific prosthesis produced by 3D printing. The areas of orthopedic surgery where 3D printing technology can be used are shoulder joint, spine, hip and pelvis, knee joints, ankle joint, and tumors. Since the diseases and characteristics handled by each area are different, the method of using 3D printing technology is also slightly different in each area. However, using 3D printing technology in all areas can increase the efficiency of surgery, shorten the surgery time, and reduce radiation exposure intraoperatively. 3D printing technology can be of great help in treating patients with particularly complex and difficult orthopedic diseases or fractures. Therefore, the orthopedic surgeon should make the most of the benefits of the 3D printing technology so that patient can be treated effectively.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.18-23
• /
• 2019

As the population grows older and medical treatments are advancing, the number of spine surgeries in elderly patients has been increasing. To obtain a successful outcomes of spine surgery in elderly patients, surgeons should prepare meticulously because elderly patients can have osteoporosis and surgery can be more extensive than in younger patients. Therefore, this study reviewed the perioperative medical treatment, particularly for osteoporosis, to improve the surgical outcomes in elderly patients.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.519-524
• /
• 2021

Meningitis after spinal surgery occurs rarely but can be fatal. A 49-year-old male was diagnosed with compressive myelopathy due to cervical disc herniation at the C 5, 6 level and underwent anterior cervical discectomy and fusion (ACDF). He complained of severe neck pain and stiffness with fever postoperatively and one week after surgery, the patient presented with abrupt tetraplegia. The follow-up magnetic resonance imaging and cerebrospinal fluid analysis revealed bacterial meningitis complicated by myelitis. The patient was treated with antibiotics and steroid, but the outcome was poor. The authors report a case of meningitis combined with myelitis following anterior cervical spinal surgery.

• Journal of the Korean Orthopaedic Association
• /
• v.52 no.1
• /
• pp.97-102
• /
• 2017

The incidence of septic arthritis after knee arthroscopy surgery has rarely been reported in approximately 0.04% to 3.4%. Moreover, septic arthritis after arthroscopic meniscal repair is more rare. There have been some reported cases, but in Korea, it has not been reported thus far. Herein, we report two cases of septic arthritis after arthroscopic meniscal repair with review of literature.

• Journal of Veterinary Clinics
• /
• v.30 no.1
• /
• pp.1-4
• /
• 2013

The present study evaluated the systemic oxidative stress status during major orthopedic surgery in dogs. Sixteen dogs presented with various orthopedic diseases involving fractures or luxation of limbs. All patients underwent orthopedic surgery for treatment of fractures or luxation of limbs. A significant increase in the plasma total oxidant status (TOS) and oxidative stress index (OSI) levels in dogs after surgery was observed. Plasma total antioxidant status (TAS) levels were significantly decreased in dogs after surgery. The results of this study suggested that association or relationship in serum between TOS or TAS levels and redox imbalance were caused by surgical trauma in orthopedic disease conditions.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.513-521
• /
• 2018

Purpose: The purpose of this study was to assess the effectiveness and complications of an ultrasound-guided axillary brachial plexus block performed by orthopedic surgeons. Materials and Methods: From March to May 2017, an ultrasound-guided axillary brachial plexus block was performed on a total of 103 cases of surgery. A VF13-5 transducer from Siemens Acuson X300 was used. The surgical site was included in the range of the anatomic sensory distribution of the blocked nerve, except for the case where an operation time of more than 2 hours was expected due to multiple injuries and the operation of the upper arm. The procedure was performed by 2 orthopedic surgeons in the same method using 50 ml of solution (20 ml of lidocaine HCl in 2%, 20 ml of ropivacaine in 0.75%, 10 ml of normal saline in 0.9%). The success rate of anesthesia induction during surgery, anesthetic induction time, anatomical range of operation, duration of postoperative analgesia and complications were investigated. Results: The results from the 2 practices were similar. The anesthesia was successful in 100 out of 103 patients (97.1%). In these patients, the average needling time was 5.5 minutes (2.5-13.2 minutes), the average induction time to complete anesthesia was 18.4 minutes (5-40 minutes), and the average duration of postoperative analgesia was 402.8 minutes (141-540 minutes). The post-anesthesia immediate complications were dizziness in 1 case, nausea and vomiting in 4 cases, and peri-oral numbness in 2 cases, but surgery was performed without problems. All these 7 cases with complications recovered on the same day. A total of 3 cases failed with anesthesia, and they were treated by an injection with local anesthesia in the operation room in 2 cases and switched to general anesthesia in 1 case. Conclusion: An ultrasound-guided axillary brachial plexus block, which was performed by orthopedic surgeons allows anesthesia in a brief period and the high success rates of anesthesia for certain surgeries of the elbow and surgeries on forearm, wrist and hand. Therefore, it can reduce the waiting time to the operating room. This technique is a relatively safe procedure and dose selective anesthesia is possible.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.2
• /
• pp.157-163
• /
• 2019

Purpose: To investigate the incidence and associated factors of delirium after orthopedic surgery. Materials and Methods: A total of 2,122 cases, who were older than 20 years and underwent orthopedic surgery at a single medical center during a one year period were included. Among them, 132 patients who were diagnosed with delirium after surgery under the Diagnostic and Statistical Manual of Mental Disorders-V criteria and medicated under the consultation of a psychiatrist were included in the study The differences in the incidence of delirium and several affecting factors were analyzed. Results: The overall incidence of delirium after surgery was 6.2% (132 in 2,122 cases). The mean age of the delirium group was 77.4 years (range, 54-92 years), which was higher than that of the non-delirium group (58.1 years). The percentage of women in the delirium group was 63.6% (84 in 132 cases), which was higher than that of the women in the non-delirium group (49.0%). The incidence of delirium after surgery was 9.3% (85 in 916 cases) due to trauma and 3.9% (47 in 1206 cases) due to disease. The incidence of postoperative delirium according to the surgical region was 29.2% (7 in 24 cases) in two or more regions, 13.7% (72 in 526 cases) in the hip, and 9.6% (14 in 146 cases) in the spine, 3.5% (20 in 577 cases) in the knee-lower leg, 2.5% (5 in 199 cases) in the foot-ankle, 2.4% (11 in 457 cases) in the shoulder-elbow, and 1.6% (3 in 189 cases) in the forearm-wrist-hand. Delirium occurred more rapidly in women and surgery due to disease, and the duration of delirium was longer in patients with dementia and major depressive disorders. Conclusion: The incidence of postoperative delirium was high in cases of surgery due to trauma and in cases of surgery in two or more sites. The incidence of postoperative delirium according to a single surgical region was higher in the order of the hip, spine, and knee. Active intervention is needed regarding the correctable risk factor.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.366-371
• /
• 2019

Hemarthrosis occurring after arthroscopic surgery for lesions of the shoulder joint is a very rare complication that can develop due to an injury to the blood vessels when an anterior portal is formed. This is a complication that rarely develops in patients who are taking antithrombotic drugs or who do not have associated diseases, such as thrombocytopenia. We report a case of hemarthrosis that occurred after performing arthroscopic surgery to repair a rotator cuff tear in a patient with a stenosis in an arteriovenous fistula for hemodialysis in the ipsilateral upper arm.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.540-545
• /
• 2021

A transverse fracture is the most common type of displaced patella fracture requiring surgery. These fractures are commonly fixed with parallel Kirschner wires or screws that cross the fracture line, often with an additional tension band. Nevertheless, conventional fixation methods of patella fractures have prevalent complications caused by the protrusion of wires or pins. These complications necessitate additional surgery for hardware removal, increase medical cost, and can limit the function of the knee joint. This paper reports cases treated with a minimally invasive load-sharing percutaneous suture of the patella tendon. The procedure provides reliable fixation for transverse patella fractures, minimizes soft tissue injuries, preserves blood flow, and reduces postoperative pain. In addition, the procedure also reduces the irritation and pain caused by the internal fixture, thereby reducing the risk of restricted knee joint movement.