• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.57-58
• /
• 2002

램제트는 다른 여러 추진시스템에 비하여 획기적으로 증가된 사거리를 가지므로 가용범위의 확대는 물론, 목표물 타격 시 높은 명중률과 낮은 격추율을 가지는 효과적인 추진 시스템이다. 램제트 엔진을 장착한 미사일로는 프랑스의 Griffon, ASMP, 미국의 Bomarc, Talos, 영국의 Bloodhound, Sea dart, 소련의 SA4, SA6 등을 비롯하여 많은 종류가 개발되어 실전 배치되었다. 근래 들어 램제트는 군사전략과 전술적인 목적 이외에도 민간용으로도 그 실용성이 강조되고 있어 그 중요성은 날로 더할 것으로 예측된다. 램제트는 일반적인 공기흡입식 엔진과는 달리 엔진 내부에 기계적으로 구동되는 부분이 없이 충격파를 통과하면서 공기의 압력이 높아지는 현상인 램압축 현상을 이용하여 공기를 압축하게 되므로 엔진의 구조가 간단하고, 상대적으로 높은 비추력과 추력/중량비를 가진다. 램제트는 정지 상태에서는 작동되지 않으며 사용 가능한 최소의 압력비를 줄 수 있는 비행 마하수에 도달해야 램제트가 작동하게 된다. 따라서 이러한 비행속도를 줄 수 있는 별도의 추진장치가 필요하게 되는데 이와 같은 보조 추진장치로 부스터를 사용한다. 부스터가 엔진의 내부에 장착된 램제트를 일제형 램제트 (IRR: integral Rocket Ramjet)라 부르며, 현대의 전략미사일과 민간용 초음속 항공기의 엔진에 도입되어 활발한 연구가 진행 중이다. 램압력을 이용하여 압축하므로 램제트의 설계시 설계점 비행 속도에서 전압력 손실이 최소가 되도록 설계되어야 하며, 이를 실험이나 수치해석을 통해 확인하여야 한다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.559-561
• /
• 2008

본 논문에서는 실용적이며 신뢰성 있는 고전압 대용량 유도전동기 구동용 H-브릿지 멀티레벨 인버터를 개발하여 산업 현장에 적용한 내용을 소개하였다. 실용적인 PWM (Pulse Width Modulation)과 PEBB (Power Electronics Building Blocks)에 기초한 신뢰성 있는 분산 제어를 적용하였으며, H-브릿지 멀티레벨 인버터를 이용한 유도 전동기 벡터 제어시의 위상지연을 보상하여 제어 성능을 향상시켰다. 또한, Power Cell 고장 발생시 시스템을 정지하지 않으면서 효율적 운전을 가능하게 하는 3상 불평형 제어를 이용하여 잉여성을 확보하였다. 다양한 전압과 용량의 H-브릿지 멀티레벨 인버터를 설계 및 제작하여 각종 부하 실험, 산업 현장 적용을 통해 적용된 방법의 타당성과 실용성을 입증하였다. 또한 실제 제품 설계, 생산, 판매, 유지 보수 과정을 통해 설계의 유연성, 생산의 효율성, 유지 보수의 편리함, 그리고 사용자 요구에 대한 대응성이 우수함을 확인하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.113-119
• /
• 2010

A safe grounding design is used for providing means to carry electric currents into the earth under fault conditions without exceeding any operating limits and for assuring that a person in the vicinity of grounded facilities is not exposed to danger of critical electrical shock. Transformer neutral point grounding is for the purpose of controlling the voltage to earth within tolerable limits under a line-to-ground fault. Transformer frame grounding is for the purpose of minimizing the hazardous potential within safety criteria appearing at the faulted equipment. ills paper deeply investigates the grounding resistance effects of distribution power transformers by analysing the neutral to eatth voltages and touch voltages when the fault occurs.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.154-160
• /
• 2020

This paper presents a grid current control algorithm for a grid connected inverter (GCI) system in a stationary reference frame. When a Proportional Integral (PI) controller at a stationary reference frame is used in a GCI system, steady state error and phase lags are presented because AC signals are controlled at a stationary reference frame. In this paper, a feedforward controller is applied to the PI controller to compensate the steady state error and phase lags by improving command tracking performance. In addition, disturbance rejection control is applied to the PI controller to protect the GCI system by eliminating disturbance, grid voltage in a GCI system, when a grid fault such as line-to-line fault, happens. The proposed GCI current control algorithm is analyzed in a frequency domain and a simulation model of the proposed GCI current control system is developed for verification of the performance.

• English & American cultural studies
• /
• v.18 no.2
• /
• pp.79-104
• /
• 2018

Chung Ji Yong is a well-known poet in the Japanese Occupation Period firstly as a lyrical and traditional poet as a member of the literary journal Simunhak(Poetry Literature) along with Park Yong Chul and Kim Young Rang and later as a prominent modernist poet in the late years of the Period. He is always highly estimated as a poet of pictorial images and lyricism, but his ardor for translations, especially Walt Whitman has been neglected so far. Before him, Ju Yohan, Yi Kwang Soo, Yi Un Sang, Kim Hyung Won and many other poets and critics had been interested in Whitman's democratic ideas and his poems. Chung Ji Young also translated Whitman's three poems in the hard days of 1930s. After the Imperial Japan surrendered to the Allied forces on 15 August 1945, ending 35 years of Japanese occupation, Korea was under the American forces and Russian troops. In this critical days of Korean's debating only one korea or separated Koreas, strangely enough, Chung ji Yong fully immersed in translating Whitman's poems only for four years as an English literature professor just before being abducted by North Korean Army, while almost discarding his own poetic ability and sense of duty as a leading poet in the literary circle with only just a few exceptions. Why did Chung Ji Yong focused on the translation of Whitman's poems in this important period as a poet and intellectual in the newly independent country? He may want to warn people too much ideological conflicts or at least express his frustration through translating Whitman's poems. Until now, academic endeavors on Chung Ji Yong's poems and life are focused on his lyrical and modernistic works of the Japanese Occupation Period and naturally little interested in the days of Independence period and his true motivations on translating Whitman's poems. As a proposal, this short article can be a minor trigger for the sincere efforts of Chung Ji Yong's last days.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.67-67
• /
• 2017

국내의 밭작물 재배에서는 부족한 인력과 시간을 단축하기 위한 농기계 사용이 필수가 되었다. 효율적인 농기계의 개발을 위해서는 농민들의 작업실태 분석이 반드시 선행되어야 한다. 본 연구에서는 감자 재배용 작업기 개발을 위해 전국의 감자 재배 농민을 대상으로 트랙터 작업기 사용실태 조사를 수행하였다. 조사대상은 강원도, 경상북도, 전라남도의 지역중 감자 생산량이 많은 곳을 분류하여 각 지역의 농업기계 대리점에서 추천한 농민을 대상으로 조사표에 의한 방문 면접 설문조사를 실시하였다. 분류된 지역은 강원도 홍천, 평창, 경상북도 고령, 김천, 전라남도 영광, 보성이다. 각 지역별 응답자수는 2명으로 진행하였다. 조사항목은 감자 재배시기, 보유하고 있는 작업기, 트랙터의 모델 및 보유대수, 작업기별 트랙터 주행단수 및 PTO 단수, 작업패턴 등이다. 조사결과, 공통적으로 감자품종 중 수미감자를 선호하는 것으로 조사되었고, 지역별로 시기상의 차이가 있지만 평균적으로 1월~5월과 8월~11월 사이에 감자 이모작을 실시하는 것으로 나타났다. 트랙터의 평균 보유대수는 2대였으며, 평균적으로 중형 트랙터 1대와 대형 트랙터 1대의 비율로 보유하고 있는 것으로 조사되었다. 보유하고 있는 작업기는 로타베이터, 수확기, 시비기, 방제기, 파종기 순으로 보유대수가 많았다. 작업기로 수행하는 밭작업으로는 경운정지, 비닐피복, 시비, 방제, 수확 등이 있었으며, 경운정지용 로터리 작업시 트랙터 주행단수와 PTO 단수는 트랙터의 경우 L2~L3단을 주로 사용하고, PTO의 경우 1단과 2단을 병행하여 사용하는 것으로 조사되었다. 로타베이터 작업패턴은 지역별로 차이를 보였으나, 평균적으로 밭의 모서리를 둘러서 작업하고 이후에 8자형식으로 이동하면서 두둑을 형성하는 것으로 나타났다. 이 작업패턴을 사용하는 이유는 후진을 하지않는 작업환경에서 가장 효율적이고 밭의 모서리에 흙이 모이지 않게하기 위함이라고 하였다.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.390-402
• /
• 2005

This study was carried out systematically to grasp the resource plants in construct-reserved site of ecological forest, Jecheon-si, Chungcheongbuk-do, Korea. This site was located at $37^{\circ}12'$ in latitude and $127^{\circ}57'$ in longitude and the period of survey was from March to October, 2004. The vascular plants were summarized as 371 taxa; 83 families, 238 genera, 324 species, 44 varieties and 3 forma. And in the results of survey on resource plants, we confirmed 178 taxa of ornamental plants$(47.98\%)$, 232 taxa of edible plants$(62.53\%)$, 257 taxa of medicinal plants$(69.27\%)$ and 154 taxa of other useful plants$(41.51\%)$. The rare and endangered plants designated by Korea Forest Service were 4 taxa; Eranthis stellata, Paeonia japonica, Viola albida and Scopolia japonica.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.52-59
• /
• 2016

COSMOS system which was developed in Seoul for real-time signal control was designed to judge traffic condition for practicing signal operation. However, it occurs efficiency problem that stop line detection and queue length detection could not judge overflow saturation of street. For that reason, following research process GPS data of Seoul city's corporationowned taxi to calculate travel speed that excluded existing system of stop line detection and queue length detection. Also, "Research of calculating queue length by GPS data" which was progressed with following research expressed queue length. It is based on establishing algorithm of judging congestion situation. The algorithm was applied to a few areas where appeared congestion situation consistently to confirm real time traffic condition with established network. [Entrance of the National Sport Institute ${\rightarrow}$ Gangnam station Intersection, Yuksam station intersection ${\rightarrow}$ National Sport Institute.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.413-422
• /
• 2012

The ducted fan for a small UAV propulsion can reconnoiter and observe in a town and a small area, it has better thrust efficiency and a long endurance than propeller. Thrust characteristics of hover and for ward flight condition for the ducted fan UAV is important issue to improve a endurance. The unsteady 3-dimensional flow fields of the ducted fan UAV is essential to stable flight. In this paper, to verify the design results of the ducted fan and to investigate a stable aeronautical characteristic, the thrust performance and the unsteady 3-dimensional flow fields are measured. Thrust characteristics for the hovering and the forward flight conditions are measured by the 6-components balance system in the subsonic wind tunnel. The unsteady 3-dimensional flow fields are analyzed by using a stationary $45^{\circ}$ slanted hot-wire technique. The swirl velocity is almost removed behind the stator blades. Therefore, the thrust performance of the ducted fan is improved and the flight stability is maintained.

• Geotechnical Engineering
• /
• v.11 no.4
• /
• pp.111-124
• /
• 1995

On development of mountaneous or hilly area, stability of cut slope should be provided to prevent undesirable landslides. When piles are used as a countermeasure to stabilize existing landslide, stabilities for both piles and slope should be simultaneously satisfied to obtain the whole stability of the slope reinforced by piles. In order to confirm the effect of stabilizing piles on slope stabilization, it is necessary to investigate the behavior of the slope, in which the piles are installed. In this paper, first, the countermeasures used commonly to control unstable slope in Korea were summerized systematically. Nezt, the behavior of piles and slope soil was investigated by instrumentation installed into a cut slope for an apartment stabilized by a row of piles. Instrumentation could present sufficient effect of piles on slope stabilization Construction works in front of the row of piles affected the displacement of piles and slope. The construction works were divided into four stages, i.e. initial cutting stage of slope, excavation stages for retaining wall and parking space, and construction of retaining wall. As the result of research, the applicability of the proposed design method could be confirmed sufficiently.