• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.8
• /
• pp.702-709
• /
• 2016

By means of the our satellite development for the past 20 years, it ensure us to obtain domestic independent development capabilities. In the case of practical-class Low-Earth Orbit(LEO) remote sensing satellites, we become a world-class developer. Furthermore, we acquire the technology to develop domestic-leading geostationary satellites, depending on the mission. Currently, we proceed with the next-generation mid-size satellite development program featuring standard bus for the expansion of the world market and has embarked on the development of lunar orbiter from this year.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.344-350
• /
• 2003

In this paper, an estimation technique of initial rotor position at standstill in Switched Reluctance Motor(SRM) is proposed. In case search coils are used as a position sensor, it has many advantages like low cost, decrease in the volume, high robust characteristics and wide applications. However, the initial rotor position detection is very difficult because the search coil's EMF is not exist at a standstill. In this paper, a near estimation method of initial rotor position is suggested using squared Euclidean distance. The simulation and experiment for the proposed method are achieved. The validity of the proposed method is verified by experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.79-82
• /
• 1997

The current from the feed motor of a machine tool contains substantial information about the machining state. There have been many researches that investigated the current as a measure for the cutting forces. However it has not been reported that indirect measurement of the cutting forces from the current of the feed motor at rest is possible. The cutting force normal to the machined surface influences the machined surface of the workpiece, which makes it necessary to estimate this force to control the roughness of the machined surface. But the unpredictable behavior of the current prevents applying the current to prediction of the cutting state. In this paper, empirical approach was conducted to resolve the problem. Also parametric adaptive and fuzzy logic control strategies are applied to the force regulation problem. As a result, the current is shown to be related to the accumulation of the infinitesimal rotation of the motor, and besides the unpredictable behavior of the current is shown to be caused by the relationship. Subsequently the relationship between the current and the cutting force is identified, and it is presented that control of machined surface using the current of the feed motor at rest is possible.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.705-712
• /
• 2004

In this paper, detection of rotor position at standstill of toroidal switched reluctance motor(TSRM) with built-in search coils using neural network is proposed. When search coils are used as a position sensor, it has many advantages like low cost, decrease in the volume, high robust characteristics and wide applications. However, the initial rotor position detection is very difficult because the search coil's EMF doesn't exist at standstill. In this paper, detection of initial rotor position of TSRM with built-in search coils using neural network is suggested. The experiment for the proposed method are presented. As a result of that, the accuracy and validity of the proposed method is verified.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.111-119
• /
• 2013

Conceptual design of RBCC (Rocket Based Combined Cycle) engine is performed through the thermodynamic cycle analysis. The engine is designed to take off at sea level and accelerate to Mach 8 at 30 km altitude. According to the flight speed, the engine operating modes are categorized into 3 modes : Ejectorjet (~ Mach 3), Ramjet (Mach 3~6), Scramjet (Mach 6~8). As a design result, the engine has a diameter of 1 m and a length of 6.7 m. In the prediction results, its maximum thrust is 16.5 ton. In Ramjet and Scramjet modes, design condition of the engine intake influence the engine thrust according to the flight speed.

• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.389-396
• /
• 1994

The bilayer film of Ag/a-S $e_{75.G}$ $e_{25}$ and the monolayer film of a-S $e_{75.G}$ $e_{25}$ act as a negative-type and a positive-type resist in focused ion beam lithography, respectively. Using a model which takes into account the ion stopping power, the ion projected range, the ion concentration implanted into resists and the ion transmission coefficient, etc., the ion resist parameters are calculated for a broad range of ion energies and implanted doses. Ion sources of A $r^{+}$, S $i^{++}$ and G $a^{+}$ are used to expose resists. As the calculated results, the energy loss per unit distance by Ga'$^{+}$ ion is about 10$^{3}$[keV/.mu.M] and nearly constant for all energy range. Especially, the projected range and struggling for 80[keV] G $a^{+}$ ion energy are 0.0425[.mu.m] and 0.020[.mu.m], , respectively and the resist thickness of a-S $e_{75}$ G $e_{25}$ to minimize the ion penetration rate into a substrate is 0.118[.mu.m].u.m]..u.m].

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.731-734
• /
• 2005

Generally, characteristics of electromechanical actuators are coupled with the mechanical and the electrical properties. Important mechanical parameters of these actuators are the achievable force and displacement in the presence of electric field. These mechanical parameters are related to the stress and strain of the materials and the actuator geometry. This paper presents how to measure the blocked force by using the micro-balance. The blocked force is defined as the force produced by the transducer under an applied voltage when the tip is constrained to zero motion. Also, a theoretical force by using the cantilever beam model is calculated under elastic domain. From the sample of 4 cm $\times$ 1 cm $\times$ 20 $\mu$m, the blocked farce measured from the equipment is 20.3 $\mu$N at 8 V$_{DC}$. By comparing it with the theoretical value, 24.9 $\mu$N, the blocked force measurement is acceptable. The furce measurement is also investigated with different AC electric fields and the frequency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.735-738
• /
• 2005

Electro-Active Paper (EAPap) is attractive as an EAP actuator material due to its merits in terms of lightweight, dry condition, large displacement output, low actuation voltage and low power consumption. This paper presents the performance of EAPap actuators with thickness variation. The EAPap is made with cellulose paper, and is shown to bend in response to an external electric field. Up to the present, we have tested displacement, current and force of EAPap with 20 $\mu$m thickness. The thickness of EAPap is important factor that affects the performance of the actuator. Therefere, three different thickness of EAPap, 20, 30, and 40 $\mu$m are investigated that inference the tip displacement, blocked force, the resonance and the actuator efficiency. There is an optimum thickness of EAPap, which is resulted from the stiffness and the mass. The performance of EAPap with thickness is discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.78-78
• /
• 2018

자동수문이란 설정된 관리수위 이하에서는 수문이 개방되지 않고, 유량이 증가하여 관리수위 이상이 되면 수문이 개방되어 관리수위까지 방류하게 되면 다시 수문이 닫히게 되어 자동으로 관리수위를 유지한다는 것을 의미한다. 이러한 연직 자동수문의 방류특성이 수동식 연직수문과 다른 점은 유량에 따라서 수문 개방고의 증감과 수문개폐가 자동으로 이루어진다는 것이다. 따라서 자동수문의 운영 중 수문개방고의 거동과 자동개폐 시점을 예측하는 것은 정밀한 수문설계를 위해 매우 중요하다. 수문 개방 시 흐름이 정지되어있다고 가정하면, 정수압 상태의 부력이론에 의한 부력수문의 개방고는 어렵지 않게 계산할 수 있다. 그러나, 흐름이 정지되어 있다가 수문의 하단으로 방류가 시작되면 수문 선단을 포함한 주변에 압력 차이로 인해 동수압 하중이 발생하게 되어 수문에 진동을 유발하고, 수문개방을 억제하는 힘이 발생하여 수문 운영에 큰 영향을 미친다. 본 연구에서는 부력식 수문의 모형실험을 통하여 정수압 상태의 부력이론에 의한 수문 개방율과 측정에 의한 수문 개방율을 비교하였으며, 압력계수를 이용하여 이론과 측정 수문 개방고의 차이는 동적하중에 의한 효과임을 확인하였다. 모형실험에서 측정된 자료와 수치모형 ANSYS - Fluent의 사용성을 검증하였고, 부력식 수문의 형상에 따른 동적하중을 분석하였다. 수문 형상비는 0.24~1.09로 설정하였고, 분석결과 부력식 수문은 수문 개방율이 커짐에 따라 압력계수는 감소하는 경향을 보였으며, 동적하중은 증가하는 경향을 보였다. 또한, 부력식 수문의 형상비에 따라서는 형상비가 증가함에 따라 동적하중이 감소하는 관계를 확인하였다.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.4
• /
• pp.469-478
• /
• 2012

In this study, structural behavior of high tension bolted connections was analyzed in order to investigate effective utilizations. Also, the simplified numerical analysis method showing bolt behavior was proposed using the connector element in the ABAQUS, a nonlinear finite element program and verified by numerical analyses on the basis of the experiment of previous study. In an effort to analyze strength properties of plate girder which high tension bolts are applied to, the effects of each design parameter were compared and analyzed after moment-displacement relations were investigated according to design parameters (upper flange, lower flange, upper and lower flange, web) by action force standards.