• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.68-74
• /
• 2009

Infra-red earth sensors(IRES) are accommodated in a geostationary multi-functional satellite, which includes optical payloads for observing the earth, to provide pointing reference for the payloads. Even the slight pointing difference between the IRES and the payloads is so critical from the geostationary orbit that can degrade their imaging performance. Therefore, a dedicated support structure is required to guarantee the stability during the flight operation. This paper shows the design justification for the IRES support structure employed in the Communication, Ocean and Meteorological Satellite(COMS). It intends to give an overall design presentation and to justify that this design is compatible with all the requirements in terms of stiffness and strength as well as the stability.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.19-25
• /
• 2012

GEO-KOMPSAT2 shall provide higher quality of image than the COMS and uses star tracker instead of earth sensor, which requires precise onboard orbit information. This requires precise on-ground orbit determination. For COMS, orbit determination is performed using the ranging data obtained from tracking system located in DAEJON. For accurate orbit determination of GEO-KOMPSAT2, KARI is building a secondary tracking station in CHUUK Islands. In this paper, the achievable accuracy of table based onboard orbit parameter generator which interpolates orbit data obtained from on-ground orbit determination using tracking data collected from two ground stations. Two types of approaches have been applied; covariance analysis and numerical analysis. By combining two analysis results, total orbit error has been estimated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.56-64
• /
• 2006

Station collocation of closely placed multiple GEO spacecraft is required to avoid the problem of collision risk, attitude sensor interference and/or occultation. This paper presents the method of obtaining the orbit correction scheme for collocating two GEO spacecraft within a small station-keeping box. The relative motion of each spacecraft with respect to the virtual geostationary satellite is precisely expressed in terms of power and trigonometry functions. This closed-form orbit propagator is used to define the constraint conditions which meet the requirements for the station collocation. Finally, the technique of constrained optimization is used to find the orbit maneuver sequence. Nonlinear simulations are performed and their results are compared with those of the classical method.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.65-73
• /
• 2011

After launch, in order to inject the geostationary satellite into its operational orbit, the perigee altitude are forced to be raised to geostationary altitude by firing onboard LAE(Liquid Apogee Engine) at apogee of the transfer orbit. In this process, the LAE burn is divided into three or four separated burns in order to control the orbit very precisely by giving feedback the determined orbit informations and to inject the satellite in predefined longitude. This paper proposes an algorithm to determine LAE firing time slots and ${\Delta}V$ vectors under assumption of impulsive LAE burning, and additionally, a method to compensate errors induced by continuous burning. And computer simulations have been performed to validate proposed algorithms.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.1018-1024
• /
• 2013

On-Board computers (OBC) for LEO & GEO satellites have been developed with their own dedicated architecture so far even though they have many similar functionalities. In this paper, we present a conceptual study results of standard OBC architecture design and propose the domestic development plan for the next generation satellite OBC. Proposed architecture is highly flexible and can be used at LEO/MEO/GEO and Moon Explorer/Deep Space Probe. Also, we introduce current status of standard OBC which is under development.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.147-158
• /
• 2020

In this paper, we will review the thruster based reaction wheel momentum dumping method for low Earth orbit satellite. Thruster based momentum dumping is widely used in GEO satellites by performing momentum dumping and attitude control using thrusters at the specific time. LEO satellite should perform momentum dumping at any time, thus it is not appropriate to use GEO satellite's momentum dumping method. In this research, we will review the method for LEO satellite, which perform momentum dumping always and use reaction wheels for attitude control during dumping. To reduce thruster's valve on and off counts, we propose to use the maximum pulse width for thruster operation. To prevent attitude error increase by thrusters, we adjust the thruster operation interval. Through simulation, we verify the proposed method's effects.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.119-125
• /
• 2006

The first GEO satellite, COMS(Communication. Ocean & Meteorological Satellite) developed by Korean participants is a multi-functional satellite accommodating two observation payloads and a communication payload. Because of the inherent requirements given by these payloads, the physical layout of the instruments and sensors and of their electronics packages is critical to mission success. This technical paper presents an overview of the mechanical system design during the preliminary design phase and describes the design consideration to achieve the optimized performance.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.2
• /
• pp.121-130
• /
• 2009

In this paper, the attitude and orbit control subsystem technology of new GEO communication and observation satellite using Sun sensors are introduced and analyzed. COMS is new GEO communication and Earth observation satellite based on EUROSTAR 3000 space bus technology. The attitude and orbit control subsystem of COMS adopts a configuration using three BASS and three LIASS Sun sensors to acquire the attitude error information in the specific reference frames. These Sun sensors are used to acquire Sun direction and to control the spacecraft to keep the relative attitude with respect to a reference Sun direction in both transfer and operational orbits. In this paper, the mathematical models of BASS and LIASS are described as well as their operational implementation in the flight software.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.30-39
• /
• 2013

In this study, calibration processes and methods of evaluating the radiometric quality of satellite images from the meteorological payload on the GEO-KOMPSAT-2A were described. MTF(Modulation Transfer Function), SNR(Signal-To-Noise Ratio), NEdT(Noise Equivalent Delta Temperature), and Dynamic Range, which are the major parameters for assessment of data radiometric quality of space-borne visible and infrared sensors, are focused. Key process of the quality check of the satellite data is the comparing the image radiometric performance parameters during the In-Oribit Test with those acquired from the ground tests. Validation plan of the image quality of the GEO-KOMPSAT-2A Meteorological Imager is addressed based on the analyses results of COMS MI data during the COMS In-Orbit Test period

• Journal of Astronomy and Space Sciences
• /
• v.18 no.2
• /
• pp.101-108
• /
• 2001

Low resolution spectroscopic observations of leo-stationary satellites over the Korean peninsula have been carried out at the KyungHee Optical Satellite Observing Facility (KOSOF) with a 40cm telescope. We have observed 9 telecommunication satellites and 1 weather satellite of 6 countries. The obtained spectral data showed that satellites could be classified and grouped with similar basic spectral feature. We divided the 10 satellites into 4 groups based on spectral slop and reflectance. It is suggested that the material types of the satellites can be determined through spectral comparisons with the ground laboratory data. We will continuously observe additional geo-stationary satellites for the accurate classification of spectral features.