• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.25-30
• /
• 2009

In this paper, a full-digital capacitive sensor for touch key applications is proposed. The proposed circuit consists of two capacitive loads to measure and a resistor between the capacitive loads. As the method measures the delays of the resistor and two capacitive loads respectively, and obtains difference between the capacitive loads by subtracting the two delays, it can reduce the effects of changing of operating environment variables such as supplying voltage, temperature and humidity. Experimental results show the method has l.02pF resolution and can be applied to touch key applications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.50-55
• /
• 2009

In this paper, a distributed amplifier is designed using distributed network synthesis that provides the optimum absorption capability of a capacitance. Transfer functions of filters, which consist of the amplifier, are synthesized by a low-pass Chebyshev approximation. Capacitances that a filter network can absorb are calculated as a function of its minimum insertion loss(MIL) and ripple. Active devices in a distributed amplifier are modeled as equivalent circuits by using their S-parameters, and their equivalent capacitances are absorbed into filter structures by properly adjusting the MIL and ripple of a transfer function. As an application example, a distributed amplifier with the gain of about 12.5dB is designed that operates over the frequency range between 0.1 and 7.5GHz. Experimental results prove that distributed network synthesis, which considers capacitance absorption capability, is useful to the design of distributed amplifiers.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.1-6
• /
• 2005

Recently embedded passive technology which fabricate passive elements such as resistors and capacitors at the inner layer of PCB(Printed Circuit Board) is used to make high performance IT products. However, embedded capacitor has limit in full range circuit applications because of the low capacitance density. In this paper, a new embedded capacitor which has wrinkled electrodes and dielectric layer was proposed to overcome the limits. FEM(Finite Elements Method) technique was used to evaluate capacitance density of the wrinkled type embedded capacitor. Capacitance density of the wrinkled type embedded capacitor is larger than that of conventional planar type embedded capacitor by about 25.6%$\sim$39.6%. In case of thin film type embedded capacitor, proposed wrinkled structure has more enhanced effect on the capacitance density.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.864-870
• /
• 2010

Air embolism can be a lethal complication of surgical procedures during which venous pressure at the site of surgery is sub-atmospheric or air is forced under pressure into a body cavity. To solve the problem, we developed the air detector using relative dielectric constant change, which is expected to be used broadly in industrial circles. We designed air detection system with air control equipment, detection circuit and LabVIEW system for air sensing. In experiments with a mock system, the proposed system showed a signal difference depending on the amount of air in the Tygon tube of the mock system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.417-417
• /
• 2012

나노복합체를 이용하여 제작한 유기 쌍안정성 형태의 비휘발성 메모리 소자는 간단한 공정과 플렉서블 기기에 응용 가능성 때문에 많은 연구가 진행되고 있다. 나노복합체를 사용하여 제작한 비휘발성 메모리 소자의 전기적 성질에 대한 연구는 많이 진행되었으나, Scale-dwon 효과를 고려한 연구가 미흡하다. 본 연구에서는 polyestrene (PS) 박막 층 내부에 분산된 InP 나노입자를 사용한 메모리 소자를 제작하여 전기적 특성을 관찰하였다. InP 나노입자를 PS와 용매인 octadecene에 용해한 후에 초음파 교반기를 사용하여 두 물질을 고르게 섞었다. 고도핑된 Si 기판위에 100 nm 두께의 $SiO_2$ 위에 InP 나노입자와 PS가 섞인 용액을 스핀 코팅한 후, 열을 가해 용매를 제거하여 InP 나노입자가 PS에 분산되어 있는 나노복합체 박막을 형성하였다. 형성된 나노복합체 박막 위에 상부 전극으로 Al을 열증착하여 비휘발성 메모리 소자를 제작하였다. 제작된 메모리 소자는 Al 전극을 마스크를 사용하여 플라즈마 에싱 장비로 에칭을 하였다. 에칭된 소자와 에칭하지 않은 소자의 정전용량-전압 특성을 측정하였다. Flat band 이동은 에칭된 소자가 0.3 V이며 에칭하지 않은 소자는 1.3 V이다. 실험 결과는 에칭을 통해 전기장에 영향 받는 영역이 작아지므로 flat band 이동이 줄어들었다. 에칭방법을 통한 scale-down 효과로 정전용량이 줄어드는 것을 알 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.509-512
• /
• 2015

In this paper, several capacitive sensors for measuring the position of the piston in hydraulic cylinder was studied and designed. The inductive LVDT sensor has been widely used to measure the position of the piston because of its high accuracy, but this type of sensor is very expensive and has difficulty in use because of its complexity. To overcome these disadvantages, we studied the optimized non-contact capacitive sensors and designed several capacitive sensors for accurate measuring the location of piston in hydraulic cylinder. The proposed capacitive sensor has the possibility of practical use for hydraulic cylinder through experiments.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.4
• /
• pp.377-382
• /
• 2007

We designed capacitance sensor in order to examine characteristics of W/O type emulsified fuel, so it concluded the following conclusions. The capacitance value of emulsified fuel, using with capacitance sensor, increases as water content increases due to the coalescence. When surfactant increases, the capacitance value decreases, the condition of W/O type emulsified fuel was maintained stably. There was revealed the capacitance value difference of W/O type emulsified fuel in in according to water content. We checked the phase separation of emulsified fuel with the capacitance value difference. The surfactant(HLB=5.4) had better stable condition than surfactant(HLB=4.3). Also, we confirmed that two mixture surfactants were better than one surfactant.

• Tribology and Lubricants
• /
• v.27 no.4
• /
• pp.209-212
• /
• 2011

The capacitive application(prove) can be used to measure the complex permittivity of dielectric material of various thickness and cross section. This paper presents that we designed the analysis system of engine oil permittivity to know the relation between the engine oil deterioration and the prove dimension. Each of the dimension of capacitive prove is changed and then electric capacity is measured by LCR {Inductance(L), Capacitance (C), and Resistance (R)} meter. The engine oil permittivity has extracted in the prove measurement. As the additional research, this paper suggest the best of the prove dimension for the permittivity measurement.

• Electrical & Electronic Materials
• /
• v.18 no.4
• /
• pp.19-25
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.272-272
• /
• 2011

무기물 나노입자를 포함하는 유기물/무기물 나노복합체는 차세대 전자 소자에 쉽게 적용이 가능하고 응용 잠재적 능력이 뛰어나기 때문에 차세대 비휘발성 메모리 소자에 응용하려는 연구가 세계적으로 활발히 진행되고 있다. 본 연구에서는 poly (methylmethacrylate) (PMMA) 절연성 고분자 박막 안에 CdTe와 CdTe-CdSe 코어-쉘 나노입자를 각각 분산시켜 이를 전하의 저장 매체로 사용하는 메모리 소자를 제작하였다. 제작된 각각의 소자에 대한 메모리 메카니즘과 PMMA 박막 안에 분포되어 있는 CdTe-CdSe 코어-쉘 나노입자에서 CdSe 쉘의 전기적 영향에 대하여 연구하였다. 소자에 필요한 용액을 제작하기 위해 서로 다른 용매에 녹아 있는 CdTe-CdSe 나노입자와 PMMA를 혼합하였다. Al 금속을 하부 전극으로 증착한 p-Si (100) 기판 위에 나노입자와 PMMA가 혼합된 용액을 스핀 코팅 방법을 사용하여 박막을 형성한 후, 남아있는 용매를 제거하기 위해 열처리를 하였다. 용매가 모두 제거된 박막위에 금속 마스크를 사용하여 상부 Al 전극을 열증착 방법으로 형성하였다. 나노입자가 포함된 고분자 박막의 메모리 특성을 비교하기 위하여 나노입자가 없는 PMMA층만으로 형성된 소자도 같은 방법으로 제작하였다. 세 가지 종류의 소자에 고주파 정전용량-전압 (C-V) 측정을 한 결과 나노입자가 분산된 PMMA 층으로 제작된 소자에서만 평탄 전압 이동이 관찰되었으며, 이것은 나노입자를 전하 포획 장소로 사용할 수 있다는 것을 확인하였다. 정전용량-시간 (C-t) 측정을 하여 나노입자가 포함된 PMMA 층으로 제작된 메모리 소자의 안정성을 관찰하였다. C-V와 C-t 측정 자료를 바탕으로 제작된 메모리 소자의 메모리 메카니즘과 CdTe-CdSe 코어-쉘 나노입자에서 CdSe 쉘의 역할을 설명하였다.