• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.193-200
• /
• 2021

In this study, an analysis technique using static condensation is proposed for an efficient local nonlinear static analysis. The static condensation method is a model reduction method based on the degrees of freedom, and the analysis model is divided into a target part and a condensed part to be omitted. In this study, the nonlinear and linear parts were designated to the target and the omitted parts, respectively, and both the stiffness matrix and load vector corresponding to the linear part were condensed into the nonlinear part. After model condensation, the reduced model comprising the stiffness matrix and the load vector for the nonlinear part is constructed, and only this reduced model was updated through the Newton-Raphson iteration for an efficient nonlinear analysis. Finally, the efficiency and reliability of the proposed analysis technique were presented by applying it to various numerical examples.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.920-926
• /
• 1990

본 연구에서는 Fig.1과 같은 2상 자연순환 회로의 1차원 해석을 수행하고, 액 상의 과냉정도와 각 상 영역에서의 밸브 마찰저항이 순환유속에 미치는 영향을 살펴보 므로써 정적 불안정의 조건을 알아보는데 있다. 본 모델에서는 유한 길이를 갖는 증 발기와 응축기를 고려하였으며, 정적 불안정의 가능성을 해석적으로 보여주기 위해 간 단한 모델(point-heat-source/sink)도 함께 다루었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.279-282
• /
• 2009

본 논문에서는 행렬응축기법 및 부구조기법을 이용하여 가변형 입체 복합 공간 구조물을 효율적으로 해석할 수 있는 해석기법을 제안하였다. 최근 구조공학의 발전과 더불어 다양한 사회적 경제적 요구에 의해 가변형 입체 복합 공간 구조물에 대한 연구가 진행되고 있다. 가변형 입체 복합 공간 구조물은 많은 구조부재가 필요 하며, 부재 수가 많아짐에 따라 각 절점이 가지는 자유도수가 크게 증가하여 초기 해석 과정에서 많은 시간이 요구된다. 또한 구조물이 변경되는 경우에는 변경되는 부분의 강성의 변화에 따라 전체 구조물의 강성이 변경되므로 이에 따른 전체 구조물의 재해석 과정이 필요하다. 이러한 점에서 구조물의 자유도수를 줄여주는 행렬응축기법과 반복적인 해석과정을 줄여주는 부구조기법은 가변형 입체 복합 공간구조물을 효율적으로 해석 할 수 있는 방법이 될 수 있다. 본 논문에서는 행렬응축기법과 부구조기법을 이용하여 가변형 입체 복합 공간 구조물을 효율적으로 해석할 수 있는 해석기법을 제안하고, 이를 토대로 구체적인 알고리즘을 작성하였다. 또한 알고리즘을 구체화시켜 가변형 입체 복합 공간 구조시스템에 적합한 구조해석 프로그램을 개발하여 예제 구조물에 대하여 구조해석을 수행하였으며, 구조해석 결과를 상용프로 그램의 구조해석 결과와 비교하여 해석기법에 대한 정확성 및 효율성을 검토하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.1
• /
• pp.79-88
• /
• 1997

Very stiff floor system in a residential-commercial building causes some problems in the numerical analysis procedure due to significant difference in stiffness with adjacent elements. Static analysis of structure with a stiff transfer-floor can be performed approximately in two steps for upper and lower parts for the structure. However, it is impossible to perform dynamic analysis in two steps with separate models. An efficient method for dynamic analysis of a structure with a right floor system is proposd in this study. The matrix condensation technique is employed to reduce the degree of freedom for upper and lower parts of the structure and a beam elements with rigid bodies at both ends are introduce to model the rigid floor system. Efficiency and accuracy of the proposed method are verified through analysis of several example structures.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.459-467
• /
• 2004

This paper presents an efficient reanalysis algorithm, named PRAS (Partial Reanalysis algorithm using Adaptable Substructuring), for the partially changed structures. The algorithm recalculates directly any displacement or member force under consideration in real time without a full reanalysis in spite of local changes in member stiffness or connectivity_ The key procedures consists of 1) partitioning the whole structure into the changed part and the unchanged part, 2) condensing the internal degrees of freedom and forming the unchanged part substructure, 3) assembling and solving the new stiffness matrix from the unchanged part substructure and the changed members.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.282-289
• /
• 2011

Rapid screening method for the determination of the emissions of pollutants from vehicle interior parts and materials have been developed as ISO 12219-2 which is using bag and based on a static condition. The method was not controlled humidity in the test bag, so it is not suitable test method for formaldehyde emission test which is highly related to humidity condition. In this study, possibility of control humidity in the static test bag by adding extra water and the effect of humidity condition for formaldehyde emissions have been investigated. The relative humidity in the test bag was affected not only amount of water added also material of test bag and test specimen. The emission intensity of formaldehyde was increased according to increasing relative humidity in test bag. But excessively supplied water was condensed on the inner surface of test bag and surface of sample specimen that were sorption formaldehyde and were reduced its emission intensity.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.760-763
• /
• 2011

본 논문의 목적은 효율적인 3절점 판 유한요소를 개발하는 것이다. Hellinger-Reissner 범함수에 근거한 혼합정식화(mixed formulation)를 사용한다. 잠김현상을 일으키는 전단변형률장을 독립적으로 분리한 후, MITC(Mixed Interpolation of Tensorial Components)방법을 이용하여 대체전단변형률장(assumed transverse shear strain field)을 구성한다. 추가적으로 회전된 반변기저벡터(contravariant base vector)로 정의된 근사전단변형률장(approximated transverse shear strain field)에 미지수(unknowns)를 도입하여 혼합정식화를 완성시키고 정적응축(static condensation)을 통해 최종 강성행렬을 구성한다. 거짓영에너지모드시험(spurious zero energy mode test), 조각시험(patch test), 등방성시험(isotropic test) 등을 실시하였으며, 4변 완전구속 정사각형 판 구조물과 60도 기울어진 단순지지 판 구조물 등 예제들을 해석하여 MITC3판 유한요소와 수렴성능을 비교하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.2
• /
• pp.233-241
• /
• 1999

본 연구는 개별 메모리를 갖는 소결합 구조의 MIMD형 병렬컴퓨터인 트랜스퓨터시스템 하에서 구조최적화를 위한 병렬처리 과정을 보이고 시험모델에 적용하여 타당성 및 효율성을 검증한다. 전체 최적화과정의 대부분을 차지하는 해석 및 민감도 알고리즘은 영역단위의 병렬성을 갖는 부구조화에 근거하고 하드웨어 구성에 맞춰 변환 재구성한다. 각 노드간 통신은 정적응축과 설계도함수에 한정, 그 횟수를 최소화하고 그들을 동기화하므로써 개별메모리형 연산모델의 약점인 통신비용의 문제를 해소한다. PC를 호스트로 한 수치실험은 고속화 효율성 면에서 고무적인 결과를 보여주고 있으며, 이런 점에서 시스템의 확장성을 함께 고려한다면 트랜스퓨터 시스템에 기초한 병렬처리는 공학 환경의 변화와 요구에 부응하는 좋은 대안이 될 수 있다.

• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.175-181
• /
• 2006

This paper presents an efficient reanalysis algorithm, named PRAS (Partial Reanalysis algorithm using Adaptable Substructuring), for the partially changed structures. The algorithm recalculates directly any displacement or member force under consideration in real time without a full reanalysis in spite of local changes in member stiffness or connectivity. The key procedures consists of 1) partitioning the whole structure into the changed part and the unchanged part, 2) condensing the internal degrees of freedom and forming the unchanged part substructure, 3) assembling and solving the new stiffness matrix from the unchanged part substructure and the changed members.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.237-249
• /
• 2002

The wall system that is composed only of reinforced concrete walls and slabs is adopted on many high-rise apartment buildings recently constructed. In the apartment buildings, a shear wall may have one or mote openings for functional reasons. Many researches on the analysis of shear wall with openings were performed. But, some restrictions prevent those research results being applied to practical analysis and design procedure. It is necessary to use subdivided finite elements lot accurate analysis of the wall system with openings. But it would cost tremendous amount of analysis time and computer memory if the entire building structure is subdivided into a finer mesh. An efficient analysis method which can be used regardless of the number, size and location of openings is proposed in this study. The analysis method uses super element, matrix condensation technique and fictitious beam technique. Analyses of example structures having various types of openings were performed to verify the efficiency of proposed method. It was confirmed that the proposed method have outstanding accuracy with drastically reduced time and computer memory from the analyses of example structures.