• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.48-53
• /
• 2002

가. 작업단계 별 작업수단 및 노동투하시간 -고추재배는 포장준비 등 일부작업을 제외하고는 인력작업에 의존하고 있으며, 육묘에서 수확 및 수확후 포장처리가지의 총 노동투하시간은 266.7시간/10a로 수확작업이 44.5%로 많았으며, 다음으로 육묘, 지주세우기 및 제거, 정식, 방제 순으로 나타났다. 따라서 노력 및 생산비절감을 위해서는 고추재배 기계화가 시급한 것으로 판단된다. 나 일관기계화방안 -고추재배시 기계화를 저해하는 요인으로는 경지규모의 협소함, 재배지의 필지의 분산, 협소한 조간간격, 비닐멀칭 및 지주유인재배, 수확기간의 길이가 길고 횟수가 많음 등으로 나타났으며, 기계화가 곤란한 것으로 나타났으며, 고추재배일관기계화를 위하여는 공동 또는 공정육묘, 트랙터 등 대형기계중심의 포장준비, 정식은 자동정식기보급, 관수·시비자동화와 붐방제기 또는 방제장치시설화, 기계수확이 되어야할 것으로 판단되었다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.230-235
• /
• 2002

엽채류 양액재배용 정식판으로 사용되는 발포스틸로폼을 작기가 끝난 후에 세척할 수 있는 브러시와 물분사방식의 평면 세척기를 제작하여 시험한 결과는 다음과 같다. 가. 정식판을 세척기내로 이송하는 속도에 따라 세칙정도를 측정한 결과, 이송단수 1단 0.15m/s에서 진행저하율이 낮았으며 2단이상에서 진행저하율이 35~40%로 매우 크게 나타났으며, 이대의 명도값은 각각 79~80으로 세척전보다 42~44정도 증가한 것으로 나타났다. 나. 횡브러시 회전속도별 정식판의 이송속도와 진행저하율은 1010rpm에서 17%로 매우 큰 것으로 나타났으나, 이때의 세척정도는 세척전후 명도차가 44.1로 매우 크게 나타났다. 다. 물공급량별 정식판의 이송속도와 진행저하율은 물공급량 80$\ell$/min일 때 11.6%로 가장 적었으며, 세척전후의 명도차도 44.4로 크게 나타났다. 라. 정식판의 세척전후 명도는 대체로 세척전 명도값이 34~40이던 것이 세척후 명도값이 59~81로 크게 개선된 것으로 나타났다. 마. 이상과 같은 결과로부터 정식판 이송속도 0.17m/s, 횡브러시 회전속도 1010rpm, 물분무량 80$\ell$/mim으로 성능 시험한 결과, 300평용을 세척하는데 2.8시간으로 인력보다 20배 능률적으로 나타나 세척기의 사용이 노동력 절감에 크게 기여하는 것으로 판단된다.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.46-51
• /
• 2005

This experiment was conducted to investigate planting depth, which applied the basic data for planting growth ability and mechanical planting of oriental melon. 'Gumssaragi-eunchun' variety was approach grafting to 'Shintozoa' and seedling was growing during 45 days in the 9cm pot and then planted on Jan. 16. The comparison of planting plots was carried out for four experimental plots, which were separated into 0cm, 4.5cm, 9cm, standard cultivation, and 12cm planting depth in soil. In the tunnel of vinyl house, the lowest and the highest temperature was $9.3^{\circ}C\;and\;41.2^{\circ}C$, respectively, and humidity was $59\~99\%$ during Jan. 18 and 19. The faster graft-take rate after planting was the deeper planting depth. The growth of 40 days after planting was not significant in each planting plot, except 0cm experimental plot. Fruit weight was the heaviest in 4.5cm planting depth of experimental plot but sugar content and flesh thickness were not significant in each planting depth. The more depth in planting meant the more increase in fermented fruit rate and decrease in marketable fruit rate. Marketable yield was 2,361kg per l0a in 9cm planting plot, which was $2\%\;and\;1\%$ lower than in 0cm and 4.5cm, respectively, and $11\%$ greater than in 12cm planting plot.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.787-791
• /
• 2000

Lettuce seedlings used in this investigation of planting distance and labor-saving efficiency were first grown in 100-hole paper trays for 30 days. Seedling height for transplanting ranged from 3 cm to 6 cm and plants had 3 to 5 leaves. The beds prepared for transplanting were of the arched type and were 35-40 cm in width, 15-20 cm in bed height, and between-bed furrow width was 20 30 cm. Typical seedling planting depth with the transplanter was 4-5 cm, although depth was quite variable because of the irregularities of the ground. Total transplanting time with the transplanter varied from 2.6 to 2.7 hours per 10a, while it took 38.1 hours per 10a with conventional planting. It was critical that the condition of both the seedlings and the bed be adjusted to the transplanter before planting. Considering yield and inter-plant distance, optimal transplanter performance resulted with $60{\times}20cm$ or $60{\times}25cm$spacing, and the labor-saving efficiency using the transplanter was improved by over 93% of that of conventional planting by hand.

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.719-726
• /
• 2016

The effect of high and low temperatures on seedling quality while raising of paprika (Capsicum annuum L.) seedlings, and their early development after planting was investigated. The control raising seedling temperature (RST) was $23^{\circ}C$; high temperature, $31^{\circ}C$; and low temperature, $15^{\circ}C$ throughout the raising seedling period. At $15^{\circ}C$ and $30^{\circ}C$, plant height, stem diameter, fresh weight, dry weight, number of leaves, and seedling leaf area were significantly lower than those at $23^{\circ}C$. At 4 weeks after planting, seedling's growth characteristics showed a similar pattern. Compared to $23^{\circ}C$, seedlings raised at $15^{\circ}C$ and $30^{\circ}C$ had an increased dry weight and leaf area per unit time after planting than during the seedling raising period. At 4 weeks after planting, crop growth rate and leaf area index were unaffected by RST, and relative growth rate and net assimilation rate at RSTs of $15^{\circ}C$ and $31^{\circ}C$ were higher than those those at RST of $23^{\circ}C$. At an RST of $15^{\circ}C$, growth speed and net assimilation rates were higher after planting than before planting, according to increased photosynthetic rate. Thus, high and low temperatures during the seedling raising period significantly reduced seedling growth and plant growth after planting. After planting, seedlings raised at $15^{\circ}C$ recovered more quickly than did those raised at $31^{\circ}C$.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.92-92
• /
• 2017

밭작물 중 마늘 재배를 위한 노동력 투입시간은 2016년 기준 10a 당 126.9시간 이었고, 파종정식의 기계화율은 2015년 기준 15.1%로 조사된다. 이는 마늘 재배에 있어서 파종정식의 기계화가 노동력 절감을 위해 필요하다는 것을 보여준다. 현재의 우리나라 마늘 파종기는 점파식으로 개발, 판매되고 있는데 집개 방식 또는 버킷 방식은 파종 속도를 올리면 파종율이 떨어지기 때문에 파종 속도를 향상시키는데 한계가 있있다. 본 연구에서는 이를 보완하기 위하여 콩, 옥수수 등의 종자에 사용되는 진공식 파종 기술을 마늘에 적용하였다. 마늘의 경우 형상이 비대칭형에다가 종구별 크기, 모양, 무게가 조금씩 다르기 때문에 이론적으로 흡입구를 설계하는 어려움이 있다. 따라서 진공흡입구의 지름과 재질을 파라메터로 하여 변화를 주고 실험을 통하여 배종률 결과의 차이를 확인하였다. 그 결과 경도 $10{\pm}2$의 실리콘 재질에 지름 14mm이상에서 90%이상의 높은 배종률을 보여주었다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.335-341
• /
• 1999

We fabricate acrylamide photopolymer as a holographic recording material and investigrate photobleaching characteristics. To explain the photobleaching kinetics of photopolymer we adopt two models of the Beer-Lambert law and optical transmittance based on rate equations obtained from a simplified energy-band model. The Beer-Lambert law is in good agreement with the experimental results in a first short-time region but not in long-time region. But the optical transmittance model based on rate equations explains the experimental results very well in both short-and long-time regions.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.173-173
• /
• 1993

kit는 cisplatin 투여 1시간전에 투여하였을때가 동시투여 후투여에 비해 좋은 효과를 나타났으며, 시장독선 지표를 모두 정상치까지 끌어내려 독성이 없으면서 cispltin의 신장독성을 완전히 억제할 수 있는 가장 좋은 물질로 생각되었다. BNA는 cispltin투여 1시간후에 투여 하였을때가 동시투여, 전투여에 비해 효과가 좋았으며 용량증가는 오히려 신독성의 증가를 가져왔고 전투여가 특히 독성이 높다. 간 microsomal효도 유도가 cisplatin독성에 영향을 줄지 모른다는 가능성을 제시하였다.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.50-58
• /
• 1995

These studies were carried out to develop a system for non -destructive and continuous measurement of fresh weight and to analyse the growth response of leaf lettuce under the different nutrient solution and light condition with this system. The developed measurement system was consisted of four load cells and a microcomputer. The output from the system was highly positive correlation with the plant fresh weight above the surface of the hydroponic solution. The top fresh weight of plant could be measured within the error $\pm$ 1.0g in the range of 0 - 2000g. The top fresh weight of leaf lettuce increased 44 times at 18th day after transferring to the nutrient solution, and the maximum growth rate was observed at 13th day after transferring. The growth rate was 10.7- 29.6% per day during 18 days. Optimum concentration of the nutrient solution for the growth of lettuce was 1.4 - 2.2 mS/cm of EC level. When the light condition was changed from dark to light, the fresh weight was temporarily decreased, but the fresh weight increased under the opposite condition. Top fresh weight of leaf lettuce in the darkness normally increased within 12 hours after darkness treatment, and then slowly increased until 78 hours under continuous dark condition. After that times, the fresh weight began to decrease.

• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.82-87
• /
• 2010

To investigate effects of kind of pot for raising of seedling (single plastic pot, double plastic pot, circular peat pot, square peat pot) and planting method of the pot (3/3, 2/3, and 1/3 by the buried degree of pot height) on watermelon (Citrullus lanatus) growth, this research was conducted under plastic film house. Since planting of seedlings, number, area and photosynthesis rate of leaves, plant height and weight were superior in seedling grown in double plastic pot than those grown in the others. In fruit characteristics harvested at 12 weeks after planting, fruit height, diameter and weight were longer in double plastic pot than in the others, also fruit peel thickness and hilum diameter were thicker and shorter. Initial growth of the plant after planting with seedling grown in double plastic pot was superior in method buried the 2/3 degree of the pot height than the other methods.