• Title/Summary/Keyword: 정수비

Search Result 1,448, Processing Time 0.038 seconds

Integrated Flood Disaster Management System for Local Governments using ICT (ICT를 이용한 지자체 홍수통합관리시스템 구축방안)

  • Cho, Wan Hee;Park, Jeong Su;Na, Yu Jin;Shin, Cheol Kyun;Lee, Yong Taek
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.577-577
    • /
    • 2016
  • 기후변화는 전 지구적 현상으로 이로 인한 홍수피해는 심화되고 있다. 기후변화 정부간 협의체 5차 보고서(IPCC, 2014)에 의하면 1980년대 이전 세계 평균 홍수피해액은 70억 달러 수준이었으나 2011년에는 240억 달러로 크게 증가한 것으로 나타났다. 2013년 필리핀에 태풍 '하이옌' 내습으로 인해 6,200여명이 사망하고, 2천여명이 실종되는 피해가 발생하였다. 국내의 경우 2014년 8월 경남 부산지역에는 시간당 130mm가 넘는 국지성 호우에 따라 차량 4,000여대가 침수, 5명 사망 등 약 125억원의 재산피해가 발생한 바 있다. 국회예산정책처(2012)와 소방방재청(2014)에 따르면, 자연재해 중 집중호우 및 태풍에 의한 호우피해가 85%를 차지하였으며, 전국 하천 피해액의 98.7%가 지방 및 소하천에서 발생하고 있다. 이에 따라 중소하천과 같이 소외된 지역의 물복지 향상을 위해서는 홍수재해 상황에 대하여 선제적 효과적 대응을 위한 과학적 체계적인 홍수통합관리 체계의 구축이 요구되고 있다. 특히 홍수관련 유관기관 자료를 연계한 실시간 상 하류 수문상황 모니터링, 홍수분석 및 하천수위별 대응기준 수립, 배수펌프장 등 수리시설원격 제어 등을 포함하는 홍수 통합관리체계 구축과 같은 비구조적 대책의 수립이 제방정비, 저류조 등 구조적 대책과 병행하여 반드시 추진되어야 한다. 이에 K-water는 ICT기반의 물관리기술력과 경험을 활용하여, 인력 기술력 예산 부족 등 열악한 재난관리 여건으로 어려움을 겪고 있는 지자체와 협업을 통해 홍수통합관리체계 구축을 지원하고 있다. 홍수통합관리체계 구축은 지자체 상 하류의 다양한 재난정보를 수집 통합하고, 수집된 정보를 활용한 홍수분석 및 홍수 대응기준 수립을 통해 예방적 재난대응 체계를 마련하는 것으로, K-water는 지난 2010년 남원시를 시작으로 무주군, 군산시, 진안군 등 21개 지자체의 홍수재해 통합관리체계 구축을 지원하고 있다. 특히 남원시의 경우 본 사업을 통한 시스템 구축후 홍수피해액이 50% 감소한 것으로 확인되는 등 재난관련 골든타임을 확보하고 홍수피해 최소화를 위한 홍수재해 통합관리 체계 구축은 이제 선택이 아닌 필수라 할 수 있다. K-water는 물관리 전문 공기업으로써의 역할을 다하고, 예방 중심의 재난관리 체계 마련을 위해 '지자체 맞춤형 홍수통합관리체계' 구축 지원을 지속적으로 확대해나갈 예정이다.

  • PDF

Estimation of Head Loss Coefficients at Surcharged Square Manhole Using Numerical Model (수치모형을 이용한 과부하 사각형 맨홀에서의 손실계수 산정)

  • Kim, Jung-Soo;Lim, Ga-Hui;Rim, Chang-Soo;Yoon, Sei-Eui
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.11 no.3
    • /
    • pp.143-150
    • /
    • 2011
  • Energy loss at manholes, often exceeding friction loss of pipes under surcharged flow, is considered as one of the major causes of inundation in urban area. Therefore, it is important to analyze the head losses at manholes, especially in case of surcharged flow. The stream characteristics were analyzed and head loss coefficients were estimated by using the computational fluid dynamics(CFD) model, FLUENT 6.3, at surcharged square manhole in this study. The CFD model was carefully assessed by comparing simulated results with the experimental ones. The study results indicate that there was good agreement between simulation model and experiment. The CFD model was proved to be capable of estimating the head loss coefficients at surcharged manholes. The head loss coefficients with variation of the ratio of manhole width(B) to inflow pipe diameter(d) and variation of the drop height at surcharged square manhole with a straight-path through were calculated using FLUENT 6.3. As the ratio of B/d increases, head loss coefficient increases. The depth and head loss coefficient at manhole were gradually increased when the drop height was more than 5cm. Therefore, the CFD model(Fluent 6.3) might be used as a tool to simulate the water depth, energy losses, and velocity distribution at surcharged square manhole.

Production of Bio-Carbon from Unused Biomass through CO2 Activation: Removal Characteristics of Formaldehyde and Acetaldehyde (미이용 바이오매스의 이산화탄소 활성화를 통한 바이오카본 생산: 포름알데하이드 및 아세트알데하이드 제거 특성)

  • Kim, JongSu;Choi, SeukCheun;Lee, Uendo;Park, EunSeuk;Jeong, Soohwa
    • Clean Technology
    • /
    • v.27 no.4
    • /
    • pp.325-331
    • /
    • 2021
  • In this study, bio-carbons were produced by activation process from unused biomass (Grade 3 wood pellet and spent coffee grounds) to determine the removal performance of formaldehyde and acetaldehyde. The activation experiments were conducted in a fixed bed reactor using CO2 as an activation agent. The temperature of the activation reactor and input of CO2 were 900 ℃ and 1 L min-1 for all the experiments. The maximum BET surface area of about 788 m2 g-1 was obtained for bio-carbon produced from Grade 1 wood pellet, whereas about 544 m2 g-1 was achieved with bio-carbon produced from spent coffee grounds. In all the experiments, the bio-carbons produced were mainly found to have micro-porous nature. A lower ash amount in raw material was favored for the high surface area of bio-carbons. In the removal test of formaldehyde and acetaldehyde, the bio-carbon produced from spent coffee grounds showed excellent adsorption performance compared with woody biomass (Grade 1 wood pellet and Grade 3 wood pellet). In addition, the comparative experiment of commercial impregnated activated carbon and bio-carbon produced from spent coffee grounds was conducted. In terms of formaldehyde removal performance, the commercial impregnated bio-carbon was excellent, while bio-carbon produced from spent coffee grounds was excellent in acetaldehyde removal.

Development of real-time program correcting error in radar polarimetric variables (실시간 레이더 편파변수 오차 보정 프로그램 개발)

  • Yoon, Jungsoo;Hwang, Seok-Hwan;Kang, Narae;Lee, Dong-Ryul;Lee, Keon-Haeng
    • Journal of Korea Water Resources Association
    • /
    • v.54 no.12
    • /
    • pp.1329-1338
    • /
    • 2021
  • Rain radar provides high spatio-temporal radar rainfall that can be used as input data to short-term precipitation forecasting models. Korea Institute of Civil Engineering and Building Technology (KICT) has developed a flash flood forecasting system that is providing flash flood forecasting based on short-term rainfall forecasts estimated by the radar rainfall. Accuracy of the radar rainfall as well as the short-term rainfall forecasts, however, can deteriorate when radar polarimetric variables have error. In this study, we develope real-time program that can correct the error inherent in the radar polarimetric variables. First, effect according to the correction of the error was verified using 363 rainfall events on non real-time. The accuracy (1-NE) of the radar rainfall was approximately 70% and correlation coefficient was higher than 0.8 after correcting the error on non real-time. The accuracy (1-NE) using the real-time program was also approximately 70% after correcting the error.

Evaluation of Growth Inhibition for Microcystis aeruginosa with Different Frequency of Ultrasonic Devices (초음파 장치의 주파수 변화에 따른 Microcystis aeruginosa의 성장억제 평가)

  • Jang, So Ye;Joo, Jin Chul;Kang, Eun Byeol;Ahn, Chae Min;Park, Jeongsu;Jeong, Moo Il;Lee, Dong Ho
    • Ecology and Resilient Infrastructure
    • /
    • v.8 no.3
    • /
    • pp.143-153
    • /
    • 2021
  • The growth inhibition effects of M. aeruginosa were verified using large volume (7.2 L) of algae samples and ultrasonication (high frequency of 1.6 MHz vs. low frequency of 23 kHz) in lab-scale experiment. The chlorophyll-a (chl-a) and cell number decreased gradually after 6 hr sonication with high frequency of 1.6 MHz whereas both decreased sharply after 6 hr sonication with low frequency of 23 kHz. Additionally, the first order degradation coefficient (k) values after sonication were greater than those during sonication. These results indicate that relatively low sonication energy per volume may affect the cell membrane and internal organs of M. aeruginosa in a slow and retarded manner and resulted in gradual decrease of cell numbers of M. aeruginosa. Based on the comparison of chl-a and cell number of M. aeruginosa after sonication, low frequency of 23 kHz is superior for growth inhibition of M. aeruginosa, since low frequency of 23 kHz easily penetrates the cell membrane and ruptures the internal organs including gas vesicles. As is evident in SEM and TEM images, ruptured cell membranes were clearly observed for low frequency of 23 kHz. Finally, the microcystin-LR in water is not detected and considered to be harmless in aquaculture systems.

High Temperature Corrosion Effect of Superheater Materials by Alkali Chlorides (염화알칼리에 의한 과열기 소재의 고온부식 영향)

  • Kim, Beomjong;Jeong, Soohwa;Kim, Hyesoo;Ryu, Changkook;Lee, Uendo
    • Clean Technology
    • /
    • v.24 no.4
    • /
    • pp.339-347
    • /
    • 2018
  • In order to cope with environmental problems and climate change caused by fossil fuels, renewable energy supply is increasing year by year. Currently, waste energy accounts for 60% of renewable energy production. However, waste has a lower calorific value than fossil fuels and contains various harmful substances, which causes serious problems when applied to power generation boilers. In particular, the chlorine in the waste fuel increases slagging and fouling of boiler heat exchangers, leading to a reduction in thermal efficiency and the main cause of high temperature corrosion, lowering facility operation rate and increasing operating cost. In this study, the high temperature corrosion experiments of superheater materials (ASME SA213/ASTM A213 T2, T12 and T22 alloy steel) by alkali chlorides were conducted, and their corrosion characteristics were analyzed by the weight loss method and SEM-EDS. Experiments show that the higher the temperature and chloride content, the more corrosion occurs, and KCl further corrodes the materials compared to NaCl under the same condition. In addition, the higher the chromium content of the material, the better the corrosion resistance to the alkali chlorides.

5 Cases of Patients with Multiple Fractures of Ribs after a Traffic Accident who Improved with the Combination of Korean Medical Admission Treatment: Case Series (교통 사고로 발생한 다발 늑골 골절 환자의 한방복합입원치료로 호전된 증례 보고 5례)

  • Lee, Ji-won;Roh, Ji-ae;Choi, Gyu-cheol;Kim, Dong-jin;Hong, Jeong-su;Kim, Gook-beom;Kim, Hyo-jun;Kim, Sun-a;Kim, Hye-gyeong;Jeong, Wu-jin
    • The Journal of Internal Korean Medicine
    • /
    • v.40 no.3
    • /
    • pp.506-516
    • /
    • 2019
  • Objectives: This study aimed to report five patients who had multiple rib fractures after a traffic accident who improved with the combination of Korean medical admission treatment. Methods: We collected the data of traffic accident patients with multiple rib fractures who were admitted to the Daejeon Jaseng Hospital of Korean Medicine from April 2018 to May 2018 to receive the combinational Korean medical treatment. We observed these cases of patients treated by Acupuncture, Pharmacopuncture, Herbal medicine, Oriental physical therapy, Chuna treatment. We measured the validity of the treatment with a numerical rating scale (NRS) and the European Quality of Life-5 Dimension (EQ5D) at admission, at two weeks, and at the discharge date of hospitalization. Results: At the end of the treatment, all patients showed a decrease in NRS scores and in increase in EQ5D. The median NRS score was 6 (5-7) at the date of admission and 4 (2-7) at two weeks and then decreased to 3 (2-6). The median EQ5D score was 0.513 (0.350-0.752) at the date of admission and 0.692 (0.418-0.913) at two weeks, and then increased to 0.783 (0.671-0.913). Conclusions: After the combination of Korean medicine admission treatment, five patients with multiple rib fractures after a traffic accident showed that the treatments were effective. However, the number of subjects was insufficient and individual efficacy was not measured in this study. Therefore, further studies are needed on this topic.

Measurement of R-134a Leakage from Vehicle Equipped Mobile Air Conditioning(MAC) System (실차를 이용한 자동차 에어컨 냉매 누출량 평가)

  • Kim, Ji Young;Seo, Chungyoul;Lee, Sangeun;Kim, Jeongsoo
    • Journal of Climate Change Research
    • /
    • v.3 no.2
    • /
    • pp.153-159
    • /
    • 2012
  • CFC-12 used in mobile air conditioning(MAC) system has been replaced by R-134a, a type of HFC refrigerant, from 1991 to 1994. R-134a has since been widely used as a refrigerant of a mobile air conditioner. However, it is one of the six main green house gases listed in Kyoto Protocol, which makes it imperative to regulate its emission and develop alternative refrigerants. In this study, the concentration of leaked R-134a was measured using VT(Variable Temperature) shed and Running loss test shed to analyze the level of air conditioner refrigerant leaked in a vehicle. According to the analysis of the concentration of R-134a leaked from a vehicle parked, annual leakage amount of R-134a was in the range of 6.46~13.28 g/yr. The figure was similar with the leakage from the mobile air conditioning system currently used. In a study using the same vehicle model, a vehicle equipped with dual evaporation system had a higher leakage rate of refrigerant than a vehicle with a single evaporation system. It appears that the added fittings and joints of the dual evaporator system led to higher leakage rate. Besides, the analysis of the change in R-134a concentration under various car speed found that more refrigerant leaked under high speed(100km/hr) and but the volume of the wind did not affect to the variation of refrigerant leakage.

A Study of Relationship Derivation Technique using object extraction Technique (개체추출기법을 이용한 관계성 도출기법)

  • Kim, Jong-hee;Lee, Eun-seok;Kim, Jeong-su;Park, Jong-kook;Kim, Jong-bae
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.05a
    • /
    • pp.309-311
    • /
    • 2014
  • Despite increasing demands for big data application based on the analysis of scattered unstructured data, few relevant studies have been reported. Accordingly, the present study suggests a technique enabling a sentence-based semantic analysis by extracting objects from collected web information and automatically analyzing the relationships between such objects with collective intelligence and language processing technology. To be specific, collected information is stored in DBMS in a structured form, and then morpheme and feature information is analyzed. Obtained morphemes are classified into objects of interest, marginal objects and objects of non-interest. Then, with an inter-object attribute recognition technique, the relationships between objects are analyzed in terms of the degree, scope and nature of such relationships. As a result, the analysis of relevance between the information was based on certain keywords and used an inter-object relationship extraction technique that can determine positivity and negativity. Also, the present study suggested a method to design a system fit for real-time large-capacity processing and applicable to high value-added services.

  • PDF

The Adequacy Assessment and Growth Effects by Methods of 1st Thinning in Chamaecyparis obtusa Forest (편백림의 1차 솎아베기 방법에 따른 생장효과와 적절성 연구)

  • Park, Joon Hyung;Son, Yeong-Mo;Lee, Kwang Soo;Park, Eun Jung;Jung, Su Young
    • Journal of Korean Society of Forest Science
    • /
    • v.108 no.3
    • /
    • pp.349-356
    • /
    • 2019
  • This study examines the effect of thinning in terms of changes in the growth characteristics of Chamaecyparis obtusa stands after they were thinned with varying intensity in Gochang, North Jeolla Province, Korea. Thinning was carried out in 2000 on Chamaecyparis obtusa stands (22 years old), and the stands were categorized in terms of the thinning intensity in the experiment: very heavy, heavy, medium, light, and control. The results of monitoring up to 2018 revealed that the diameter at breast height and the growth rate of individual trees after thinning had a positive correlation with the thinning intensity, whereas the stand volume showed a negative correlation. The height to diameter (H/D) ratio decreased by up to 70-80 due to the increased diameter at breast height after thinning and thereby resulted in better quality. The relative yield index right after the first thinning was between 0.75 and 0.95, which suggests the best timing for the first thinning had been missed. This study's findings are expected to serve as a basic reference in establishing the thinning system for Chamaecyparis obtusa forests.