• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.46-58
• /
• 2017

This study was conducted to investigate the optimal conditions for spore germination, prothallus propagation, sporophyte formation and seedling growth in Microlepia strigosa (Thunb.) C. Presl. Spore germination and prothallus development were promoted by low concentrations of Knop medium nutrient solution. The optimal medium for prothallus propagation and antheridium formation was 2X MS medium with 3% sucrose. The activated charcoal content of the medium did not affect prothallus proliferation. Among the various combinations of culture soil (bedding soil, peat moss, perlite and decomposed granite), a mixture of bedding soil, peat moss and decomposed granite at a ratio of 1 : 1 : 1 (v : v : v) had a positive effect on sporophyte formation. The most efficient conditions for promoting the growth of whole plants (sporophyte seedlings) were 50 - cell plug trays filled with a mixture of bedding soil and decomposed granite at a 2 : 1 (v : v) ratio.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.5
• /
• pp.27-36
• /
• 2016

This paper presents the investigation of the major influence factors on the degree of soil plugging for open-ended piles based on the Coupled Eulerian-Lagrangian (CEL) numerical technique. The main objective of this study was to investigate the effect of soil plugging on the response of piles in various conditions. Through comparison of the results of field load tests, the CEL methodology was found to be in good agreement with the general trend observed by in situ measurement. Additionally, the parametric studies were performed by controlling the soil conditions, soil elastic moduli, end-bearing conditions and multi layers. It was found that the degree of soil plugging for sand layers was greater than that of clay layers. Also, the degree of soil plugging increased with an increase in both the soil stiffness and length of pile embedded in the bearing layer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.831-839
• /
• 2023

The purpose of this study is to quickly collect and analyze information generated in real-time at disaster sites to propose an integrated plan for an on-site support system that can support accurate disaster site situation identification and decision-making, and to review field applicability through prototype simulation. Accordingly, information collection, sharing, and convergence technologies that can be used at disaster sites were reviewed, and a plan for integrating a smart disaster site support system that can create an efficient flow of information resources and information necessary for the entire stage of disaster management was presented. In order to examine the possibility of operating the system with a prototype manufactured based on the integration plan, simulations were conducted based on the storm and flood disaster scenario, and it was confirmed that various functions in the system were implemented normally and displayed on the GIS situation board. Through this study, it is expected that efficient and active disaster response will be possible in a rapidly changing disaster environment.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.10 no.4
• /
• pp.59-71
• /
• 2000

Due to the advance of computer and communication technology, intrusions or crimes using a computer have been increased rapidly while various information has been provided to users conveniently. As a results, many studies are necessary to detect the activities of intruders effectively. In this paper, a new association algorithm for the anomaly detection model is proposed in the process of generating user\`s normal patterns. It is that more recently observed behavior get more affection on the process of data mining. In addition, by clustering generated normal patterns for each use or a group of similar users, it is possible to identify the usual frequency of programs or command usage for each user or a group of uses. The performance of the proposed anomaly detection system has been tested on various system Parameters in order to identify their practical ranges for maximizing its detection rate.

• Applied Biological Chemistry
• /
• v.1
• /
• pp.12-20
• /
• 1960

고위생산답(高位生産畓) 22개(個)와 매년(每年) 호마엽고병(胡麻葉枯病)을 발생(發生)시키는 저위생산답(低位生産畓) 18개토양(個土壤)을 분석(分析)하고 활성철(活性鐵)과 열염산(熱鹽酸)에 녹는 철(鐵)의 분포상태(分布狀態)를 조사(調査)하였으며 그 결과(結果)는 아래와 같다. 1. 작토중(作土中)의 활성철(活性鐵)의 함량(含量)과 청취(聽取)한 정조수량간(正粗收量間)에는 밀접(密接)한 정상관(正相關) (${\gamma}=0.68$, 고등(高等)의 유의성(有意性)이 있음)이 있다. 2. 고위생산답(高位生産畓) 토양(土壤)의 활성철(活性鐵) 및 열염산가용철(熱鹽酸可溶鐵)은 저위생산답(低位生産畓) 토양(土壤)에서의 그것보다 현저(顯著)히 많았으며 각(各) 토양별(土壤別) I 층(層)의 그 평균함량(平均含量)과 열염산가용철(熱鹽酸可溶鐵)에 대(對)한 활성철(活性鐵)의 비율(比率)은 아래와 같다. 고위생산답(高位生産畓) 조사점수(調査點數) 활성철(活性鐵)% 활성철(活性鐵)/염산가용철(鹽酸可溶鐵) 잔적토(殘積土) 6 1.313 0.374 하성토(河成土) 9 1.334 0.335 해성토(海成土) 5 1.120 0.382 평균(平均) 20 1.224 0.359 저위생산답(低位生産畓) 조사점수(調査點數) 활성철(活性鐵)% 활성철(活性鐵)/염산가용철(鹽酸可溶鐵) 잔적토(殘積土) 5 1.15 0.370 하성토(河成土) 8 0.472 0.191 해성토(海成土) 5 1.068 0.362 평균(平均) 18 0.808 0.288 그러나 표(表)에서와 같이 잔적토(殘積土) 저위생산답(低位生産畓) 각층(各層)의 철(鐵)은 고위생산답(高位生産畓)에서 보다 낮지 않았다. 3. 해수(海水)의 영향(影響)을 받지 않은 고위생산답(高位生産畓)에서는 표층토(表層土)의 세탈(洗脫)이 적었으나 동(同) 저위생산답(低位生産畓) 및 해성토(海成土)에서는 그 세탈(洗脫)이 크고 동세탈물(同洗脫物)은 심층(心層)에 집적(集積)되여 있다. 4. 해성토(海成土)에서는 고위생산답(高位生産畓)이나 저위생산답(低位生産畓)을 막론(莫論)하고 집적층직하(集積層直下)에 활성철량(活性鐵量)이 심(甚)히 적은 층(層)이 있다. 그리고 집적층(集積層)은 고위생산답(高位生産畓)에서는 II-III층(層)(지표면(地表面)으로부터 60cm이내(以內))에 저위생산답(低位生産畓)에서는 I-II층(層)(지표면(地表面)으로부터 대개(大槪) 30cm이내(以內))에 위치(位置)한다. 5. 같은 고위생산답(高位生産畓) 및 저위생산답(低位生産畓)에서는 토성간(土性間)의 활성철함량(活性鐵含量)에 큰 차이(差異)가 없다. 6. 내산씨(內山氏)의 4개(個)기본(基本)토양형별(土壤型別)로는 동일(同一)토양형((土壤型)이라도 고위(高位) 저위생산답별(低位生産畓別)로 활성철(活性鐵)의 함량(含量)에는 차이(差異)가 크다.

• Radiation Oncology Journal
• /
• v.26 no.3
• /
• pp.173-180
• /
• 2008

Purpose: The modification of radiation-induced apoptosis by EGCG, known as antioxidants or oxidants, was studied in mice spleens irradiated with a lethal dose. Materials and Methods: Male C57BL/6 mice were divided into control, irradiation-only, and EGCG (100 mg/kg i.p. 1 h before irradiation) pretreatment groups. The mice were irradiated with a single whole-body dose of 7 Gy. The apoptosis in the spleens after irradiation of the lethal dose were analyzed by TUNEL assay. In addition, the expression levels of the Bax and Bcl-2 proteins were quantified using a Western blotting method. Results: The induction of apoptosis was detected in the splenic white pulp. The highest level of apoptosis was detected at 8 hours after irradiation. No significant difference was identified by the apoptotic index (53.9% vs. 52.1%, p=0.328) and relative Bax protein expression (0.86 vs. 0.81, p=0.335), between the irradiation-only and EGCG pretreatment group, respectively. However, a lower Bax/Bcl-2 ratio (1.64 vs. 0.97, p=0.037) and higher relative expression level of Bcl-2 protein (0.57 vs. 0.82, p=0.037) was measured in the EGCG pretreatment group. Conclusion: The EGCG pretreatment neither decreased the radiation-induced apoptosis in mice splenocytes, nor induced additional apoptosis.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.257-264
• /
• 1999

The trickling system for automatic and individual watering were made with Bunchungto, Ongito and Backjato. The thickness of ceramics were 1.0, 1.5, 2.0, 2.5 and 3.0mm. And they were fired in a muffle furnace at five different temperatures between 500 and 900'E during 12 hours. The upper plastic parts of sensor consisted of five elements made by steel mold. With the photo fiber sensor attached to datalogger, an accumulated amount of drops for every 10 minutes were recorded. The porosity is higher in the order of Bunchungto, Backjato and Ongito; also, as the firing temperature is higher and the thickness is thicker, the porosity is higher. The ceramic sensors consisted of $SiO_2$ of 54.17~71.62wt.%, A1$_2$ $O_3$ of 15.42~33.79wt.% and the rest of 10wt.%, those were Fe$_2$ $O_3$, CaO, MgO, Na$_2$O, $K_2$O, Ti $O_2$, P$_2$ $O_{5}$. The pattern of dropping were changed according to the variety, thickness and firing temperature of ceramics. As the ceramics were made thicker, the fluctuation of dropping became more rapid, but it did not regularly work at 1mm thickness. As the firing temperature of ceramics became higher, the fluctuation of dropped amount became more rapid.

• Radiation Oncology Journal
• /
• v.19 no.3
• /
• pp.252-258
• /
• 2001

Purpose : The objectives of this study are to investigate the significance of apoptotic death compared to total cell death after $\gamma-ray$ irradiation in human H&N cancer cell lines and to find out correlation between apoptosis and radiation sensitivity. Materials and method : Head and neck cancer cell lines (PCI-1, PCI-13, and SNU-1066), leukemia cell line (CCRF-CEM), and fibroblast cell line (LM217) as a normal control were used for this study. Cells were irradiated using Cs-137 animal experiment irradiator. Total cell death was measured by clonogenic assay. Annexin-V staining was used to detect the fraction of apoptotic death. Results : Surviving fraction at 2 Gy (SF2) were 0.741, 0.544, 0.313, 0.302, and 0.100 for PCI-1, PCI-13, SNU-1066, CCRF-CEM, and LM217 cell lines, respectively. Apoptosis was detected in all cell lines. Apoptotic index reached peak value at 72 hours after irradiation in head and neck cancer cell lines, and that was at 24 hours in CCRF-CEM and LM217. Total cell death increased exponentially with increasing radiation dose from 0 Gy to 8 Gy, but the change was minimal in apoptotic index. Apoptotic fractions at 2 Gy were $46\%,\;48\%,\;46\%,\;24\%,\;and\;19\%$ and at 6 Gy were $20\%,\;33\%,\;35\%,\;17\%,\;and\;20\%$ for PCI-1, PCI-13, SNU-1066, CCRF-CEM, and LM217, respectively. The radioresistant cell lines showed more higher apoptotic fraction at 2 Gy, but there was not such correlation at 6 Gy. Conclusion : All cell lines used in this study showed apoptosis after irradiation, but time course of apoptosis was different from that of leukemia cell line and normal fibroblast cell line. Reproductive cell death was more important mode of cell death than apoptotic death in all cell lines used in this study. But there was correlation between apoptotic fraction and radiation sensitivity at 2 Gy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1566-1570
• /
• 2006

이 연구는 하상변동 수치모형을 적용하여 임진강의 장기간 하상변동과 그에 따른 하천 수위 변화의 예측, 안정하상 검토, 하상변동이 계획홍수위에 미치는 영향, 그리고 하상준설이 수위 및 하상변동에 미치는 영향의 검토를 통해 해당 하천에서 하상변동 특성의 파악에 필요한 자료 및 중.장기 수방대책 수립을 위한 기본 자료를 제공할 목적으로 수행하였다. 임진강 하상변동의 예측에 적절한 일차원 정상 하상변동모형으로 HEC-6 모형을 선정하였다. 모형적용을 위한 현황분석으로 하상토 특성 자료를 수집.분석하였으며, 지형자료에 대한 분석도 수행하였다. 그리고 모형의 적용영역 내에 위치한 각 수위표 지점의 수리.수문자료를 수집하여 분석하였다. HEC-6 모형의 보정을 고정상 보정과 이동상 보정으로 구분하여 수행하였다. 고정상 보정에서는 설정한 조건에 적합한 Manning계수의 결정이 곤란하여 하천의 지형자료와 하상토 자료 등을 고려하여 구간별로 적정한 Manning 계수 값을 선정하였다. 이동상 보정을 통해 HEC-6 모형에서 사용하는 유사량 산정공식 중 하류경계에서 상류로 약 8 km 구간에 대한 하상상승 현상을 가장 잘 보여주는 유사량 공식인 Madden(1963)이 수정한 Laursen(1958) 공식을 선택하였다. 하천망 유사이동 수치모형인 HEC-6 모형을 사용하여 20년간의 장기하상변동을 수치모의하였다. 임진강의 최심하상고 변동량 예측결과 상류경계로부터 약 52 km까지는 하상저하가 지배적이며, 중 하류는 하상상승이 지배적인 것으로 나타났다. 연구 대상구간에서 대체로 퇴적에 의한 하상상승이 예상되었다.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.9-22
• /
• 2002

고속도로-연결로는 두 개의 교통흐름이 서로 상충되는 지점으로서 복잡한 교통행태를 나타내고 고속도로 구간 중 용량저하 및 교통와해현상, 난류현상이 일어나는 구간으로서 운영상 문제점이 많이 일어나고 있는 상태이다. 이 구간에서의 운영상태가 전체 시설물의 운영상태에 큰 영향을 끼친다는 점을 감안할 때, 이 구간의 국내자료를 토대로 한 교통류 분석은 중요한 의미를 가진다. 따라서, 교통행태에 대한 미시적인 분석이 이루어지지 않은 상태로 기존의 HCM 모형과 같은 거시적인 분석 방법만을 가지고는 분류구간 교통현상을 규명하기 어렵다. 본 연구에서는 기존 연구들 분석방법의 문제점을 해결하기 위해, 고속도로-연결로 구간중 유출부 구간을 대상으로 현장조사를 실시하였고, 지점(구간)과 차로로 세분하여 미시적인 방법으로 교통특성을 규명하였다. 또 한 유출부 구간의 여러 지점에서 지점 및 차로별 교통량을 예측할 수 있는 교통분포 모형식을 개발하였다. 정립된 교통분포 모형식을 적용해 본 결과 유출부 구간의 분석 및 서비스 수준의 평가는 연결로 접속차로(Vl)의 교통량만을 고려하여 분석하는 것은 합리적이지 않고, 연결로나 본선 모두와 진입부를 포함한 연결로 전체를 다 고려해야 한다는 것을 알 수 있었다. 미시적인 분석방법을 통한 차로별 교통분포 모형식은 기존 분석방법과 비교하여 더 정확하게 그리고 폭 넓은 분석 및 적용하기에 손쉬운 모형이라는 점에서 상당히 효과적인 분석방법이라고 할 수 있다. 하지만 본 연구의 결과는 한 조사지점에 대한 적은 자료를 토대로 하였기 때문에 실제적용 가능성에서 향후 보강할 필요가 있으며, 다른 지점의 현장조사와 세밀한 비교연구가 필요하다.