• Title/Summary/Keyword: 정상모드

Search Result 376, Processing Time 0.024 seconds

Performance Improvement of the QAM System using the Dual-Mode NCMA and DPLL (이중모드로 동작하는 NCMA와 DPLL를 이용한 QAM 시스템의 성능향상)

  • 강윤석;안상식
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.7A
    • /
    • pp.978-985
    • /
    • 2000
  • Blind equalizers recover the transmitted data using statistical characteristics of the signal alone. Among many alternatives, steepest gradient descent type algorithms such as the CMA and Sato algorithm are most widely utilized in practice. In this paper we propose a dual-mode NCMA algorithm, which combines the advantages of the dual mode CMA and Normalized CMA (NCMA) with the dual mode phase recovery algorithm. In addition, we perform computer simulations to demonstrate the performance improvement of the proposed algorithm with a QAM system. Simulation results show that the presented algorithm has a faster convergence speed and smaller steady-state residual error than the CMA and dual-mode CMA.

  • PDF

Control Method of Bidirectional Inverter for BESS with Backup Power Function (백업전원 기능을 갖는 BESS를 위한 양방향 인버터의 제어 기법)

  • Oh, Hyeongmin;Jung, Sanghyuk;Jung, Ahjin;Choi, Sewan
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.205-206
    • /
    • 2012
  • 백업전원 기능을 갖는 BESS 시스템은 계통이상 시 계통연계모드에서 독립운전모드로 전환해야 하며 이때 중요부하에 과도상태 없는 안정적인 전압을 공급해야 한다. 기존의 전류제어 방법은 모드전환 시 과도상태가 발생하여 중요부하에 심각한 영향을 미칠 수 있다. 본 논문에서는 백업전원 기능을 갖는 BESS를 위한 양방향인버터에서 간접전류제어기법을 기반으로 양방향제어 및 끊김없는 모드전환 기법을 제안한다.

  • PDF

Flyback Converter Operation in Critical Conduction Mode (플라이백 컨버터의 경계점 모드 운전에 관한 연구)

  • Kim, H.Y.;Woo, J.S.;Jung, H.J.;Kwon, Y.A.
    • Proceedings of the KIEE Conference
    • /
    • 2005.10c
    • /
    • pp.205-207
    • /
    • 2005
  • 플라이백 컨버터의 경계점 도통 모드 운전은 변압기의 자화인덕턴스 전류를 연속과 불연속의 경계에서 도통시킴으로써 기존의 고정주파수 컨버터에서 소프트 스위칭을 위하여 사용하였던 별도의 스위치나 보조회로를 추가하지 않으면서 전력소자의 소프트 스위칭을 가능하게 하는 장점을 가진다. 본 논문에서는 스위치의 온 오프시 변압기의 인덕턴스와 스위치의 기생 커패시터 성분이 일으키는 공진구간을 전체 스위칭 주기에 포함시킴으로써 경계점 도통 모드 운전에서 부하출력에 따른 스위칭 주파수의 변화를 보다 정확히 제시하고 이를 바탕으로한 정상상태모델링을 통하여 경계점 도통 모드 플라이백 컨버터의 여러 운전 특성을 분석하였다.

  • PDF

램제트 엔진 흡입구의 점성 유동장 수치계산

  • 강호철;신동신
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2002.04a
    • /
    • pp.59-59
    • /
    • 2002
  • 램제트 추진기관은 압축과정을 별도의 부품 없이 형상에 의해서 감속하여 연소 압력비를 얻는다. 따라서 구동 마하수와 형상에 의해 흡입과정의 압축 효율이 결정된다. 설계점은 충분한 유량을 확보 할 수 있는 유량과 충격파 각을 조절하여 전압력 손실을 줄이도록 고려되어야 한다. 또한 연소가 일어나면 연소실 압력이 배압으로 작용하고 비행시에 받음각은 변하므로 이에 따른 성능 분석도 고려 되어야 할 사항이다. 본 연구는 국내에서 실험한 형상에 대해 수치계산을 수행하여 코드의 검증과 아울러 램제트 유동장의 수치적 시뮬레이션도 설계단계에서 하나의 도구로 이용할 수 있음을 보여준다. 실험에서는 배압 조건을 얻기 위해 유동 블록키지를 유로 내에 두어 상응하는 배압을 얻었지만 본 계산에서는 압력 경계조건을 직접 사용하였다. 유동이 비정상 특성을 가지므로 시간 정확도를 이차로 가지도록 이중시간 전진법을 사용하였다. 사용한 압력비는 충격파가 카울 끝에 닿는 임계상태에 가까운 12, 13, 14에 대해 계산을 수행하였고 부스터모드로 흡입구 끝이 막혀 있다가 램제트 모드로 바뀌어 연소실 압력이 위의 압력비라고 가정할 때의 비정상 천이 과정을 계산해 보았다. 본 계산은 흡입구 부분만을 떼어놓고 적절한 가정 하에 수행되었지만 연소실 내부도 비정상 특성을 가지므로 흡입구와 연소실을 동시에 같이 계산해야한다. 추후에 전체적인 계산을 진행하기 위한 전 단계로 흡입구 계산만을 수행하여 실험과 잘 일치하는 계산 결과를 얻었고 전체 계산을 위한 연구는 진행 중에 있다.

  • PDF

Numerical Analysis and Control of Open Cavity Flow (열린 공동 유동의 수치적 모사 및 Jet Blowing 을 이용한 제어)

  • Chang, Kyung-Sik;Park, Seung-O;Choi, Hun-Ki
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.5
    • /
    • pp.101-108
    • /
    • 2002
  • A numerical simulation of an incompressible cavity flow is conducted. Two dimensional Navier-Stokes equations are integrated using staggered grid and a finite volume method with C-QUICK scheme for spatial derivatives and fully implicit scheme for the time derivatives. SIMPLE-C algorithm is employed to solve the pressure field. Computational results show that the third eddy is generated in the shear layer mode but not in the steady mode. This signifies that the third eddy plays an important role in cavity flow stability. As a means to control the flow, jet blowing is applied to a position below the cavity upstream edge. Effects of flow control parameters on the stability such as the frequency, the phase, and the velocity magnitude are reported.

Extraction of Myocardial Infarction by Consecutive Image Analysis in B-mode Echocardiogram (B-모드 심초음파도의 연속 영상 분석에 의한 심근경색증 추출)

  • Son, Kweon;Cho, Sung-Mok
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.7 no.6
    • /
    • pp.1116-1121
    • /
    • 2006
  • We studied on some techniques which are able to discriminate the difference between normal and infarcted myocardium by consecutive image analysis in B-mode echocardiogram. In order to analyze two-dimensional echocardiogram, we presented inter-frame and intra-frame analysis method throughout the complete heart cycle in closed-chest human and proposed new analysis parameters which are named HGE and LT. The analysis technique using the proposed parameters revealed quantitatively dominant features between normal and infarcted regions. The infarcted areas yield regions of higher intensity throughout the entire cardiac cycle, but normal tissue demonstrates greater variability throughout the entire cardiac cycle. Hence, we could verify that these parameters varying over the entire cardiac cycle are good indicators for the state of myocardium.

  • PDF

Calculation of the Thyristor Firing Angles to Analyze the Characteristics of Two-Module TCSC in Vernier Mode (Vernier 모드 2-듈 TCSC의 특성 해석을 위한 싸이리스터 점호각 계산)

  • 정교범
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.5 no.1
    • /
    • pp.54-62
    • /
    • 2000
  • 본 논문은 Vernier 모드에서 운전하는 2-모듈 TCSC로 구성된 전력송전시스템의 특성 해석을 위하여 싸이리스터 점호각 계산을 푸리에 공간에서 수행한다. 이를 위하여 싸이리스터 스위칭 함수를 이용하여 TCSC 리액터 전류에 관한 연립방정식을 구하였다. TCSC 모듈의 등가 임피던스가 전력송전 시스템이 요구하는 특정값을 갖게 하는 싸이리스터 점호각을 수치해석 방법을 사용하여 구하고, TCSC 전력송전시스템의 정상상태 특성을 해석하였다. 또한 EMTP 시뮬레이션을 수행하여 푸리에 공간에서의 점호각 계산의 타당성을 시평면상에서 검증하였다.

Common Mode Filter Embedded in Flexible Printed Circuit Board for Multi-Function Cable (다기능 케이블을 위한 연성 회로 기판에 내장된 공통 모드 필터)

  • Byun, Jin-Do;Jung, Sang-Woon;Lee, Keun-Hyung;Lee, Hai-Young
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.3
    • /
    • pp.343-351
    • /
    • 2008
  • In this paper, a spiral shaped common mode filter(CMF) embedded in a flexible printed circuit board(FPCB) is proposed for a multi-function cable. The CMF embedded in a FPC cable presents a new concept as a multi-function cable by the common mode rejection characteristics without a surface mounted device(SMD) CMF. The embedded CMF has a wideband common mode rejection bandwidth and an enhanced differential mode characteristics compared to conventional CMFs that use a magnetic material such as a ferrite of high loss. The proposed CMF of 3 turn inductors has a common mode rejection bandwidth from 0.4 GHz to 3.12 GHz and has 1.95 dB at 3 GHz, 6.97 dB at 8 GHz improvements of a differential mode insertion loss compared to the commercial LTCC(Low Temperature Co-fire Ceramics) CMFs.

Stability of the Divergent Barotropic Rossby-Haurwitz Wave (발산 순압 로스비-하우어비츠 파동의 안정성)

  • Jeong, Han-Byeol;Cheong, Hyeong-Bin
    • Journal of the Korean earth science society
    • /
    • v.37 no.2
    • /
    • pp.107-116
    • /
    • 2016
  • Stability of the barotropic Rossby-Haurwitz wave is investigated using the numerical models on the global domain. The Rossby-Haurwitz wave under investigation is composed of the basic zonal flow of super-rotation and a finite amplitude spherical harmonic wave. The Rossby-Haurwitz wave is given as either steady or unsteady wave by adjusting the strength of the super-rotating zonal flow. Stability as well as the growth rate of the wave in the numerical simulation is determined by comparing the perturbation amplitude at two different time stages. Unstable modes of the Rossby-Haurwitz wave exhibited a horizontal structure composing of various zonal-wavenumber components. The vorticity perturbation for some modes showed a discontinuity around the area of weak flow, which was found robust regardless of the horizontal resolution of the model. Fourier finite element model was shown to generate the unstable mode in earlier stage of the time integration due to less accuracy compared to the spherical harmonic spectral model. Taking the overall accuracy of the models into consideration, the time by which the unstable mode begin to dominate over the spherical harmonic wave was estimated.

Simulation Method for Radio-Frequency Single-Electron Transistor (RF-SET) Operation (고주파 단일전자 트랜지스터 (RF-SET) 동작의 시뮬레이션 방법)

  • Yu Yun Seop;Park Hyun-Sik
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.42 no.5 s.335
    • /
    • pp.9-14
    • /
    • 2005
  • Simulation method for a pure radio-frequency (rf) mode of reflection-type and a pure rf mode of transmission-type radio-frequency single-electron transistor (RF-SET) operation is introduced. In this method, the solutions of differential equations based on Kirchhoff's law are obtained self-consistently at frequency-domain. Also, the steady-sate single-electron transistor (SET) current model and the time-dependent SET current model are used in this method. The reflected wave of a typical reflection-type RF-SET and the transmitted wave of a typical transmission-type RF-SET are calculated, and the accuracy of our developed method including the steady-state SET current model is verified with the method introduced by reference 2. At high frequency over GHz, results of our developed method including the time-dependent SET current model are considerably different from that including the steady-state SET current model. At high frequency over GHz, an exact time-dependent SET current model is needed to analyze RF-SET operation.