• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.202-205
• /
• 2002

The micro-extruding die is a die for manufacturing of fine-wire by extruding process. The fine-wire made from the micro-extruding can be effectively applied to fields of semiconductor parts and medical parts etc. It is predicted that the demand of fine-wire in industry is more and more increasing. In this study $\Phi$ 50${\mu}{\textrm}{m}$ micro-drill which is coated with diamond is used for drilling of super micro-hole sues. For the machining of taper parts of entrance and exit, drill having $\Phi$ 9mm inclination angle 20$^{\circ}$ is used. This is useful for anti tool-breakage in drilling process. After micro-drilling, the polishing process by abrasive is carried out for increasing surface roughness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.641-645
• /
• 2002

In case of aluminum-cased battery, The ratio of height and base of square is generally above the ten times, square-shaped and problem of non-axis symmetry. It is typical model to set up the analysis method of finite element. The reliable analysis of finite element method is suggested, which is used to investigate the possibility that multi-stage deep drawing and ironing used currently is replaced by backward impact extrusion favorable in the respect of cost production and productivity. The influence of parameter was analyzed and compared, which was considered to analyze the process of large deformation plasticity such as extrusion. Die and billet was made as the same shape of finite element model. The results of experiment show good forming without the rupture and wrinkles with the optimum velocity 100mm/sec obtained by analysis.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.151-156
• /
• 2000

A kinematically-admissible velocity field is proposed to determine the forming load the average extruded length and the velocity distribution in the forward and backward extrusion process of a socket. Experiments are carried out with antimony-lead billets at room temperature using the rectangular punch and the hexagonal die. The theoretical predictions of the forming load and the average extruded length are in good agreement with the experimental results.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.213-219
• /
• 2000

A impeller hub is usually made through three forging processes : forward extrustion, upsetting and finishing. The finishing process is closed die forging in which the load increases abruptly at the final stage, resulting in underfilling in the finished product due to insufficient load capacity of the press. In this study, the rigid-plastic finite element analysis was applied to the impeller hub forging process in order to optimize process and to estimate required load. As a result, two kind of improvements for the process were suggested to reduce the load requirement in the finishing process.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.110-116
• /
• 1999

A new KAVF(kinematically-admissible velocity field) is proposed to determine the forming load, the average extruded length and the flow pattern is the extrusion/forging process of polygonal headed bars. Experiments are carried out with lead billets at room temperature using regular polygonal shaped punches. The theoretical predictions of the forming load and the average extruded length are in good agreement with the experimental results.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.96-103
• /
• 1999

A kinematically admissible velocity field is derived to analyze the forming load and the extruded length in the extrusion/forging process of trochoidally headed bars from round billets. The forming load and the extruded length are obtained by minimizing the total energy-consumption rate. Experiments are carried out with lead billets at room temperature using trochoidally shaped punches. The theoretical predictions of forming load and extruded length are in good agreement with the experimental results.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.847-853
• /
• 2011

본 연구는 압출 시 성형온도를 유지하여 Zn-22Al 합금분말의 성형성을 향상시키는 하이브리드 분말 압출 공정의 개발 및 온도 유지시간이 압출된 스퍼기어의 기계적 특성에 미치는 영향을 조사하기 위해 수행되었다. 피치원 지름 1.8mm 의 소형 스퍼기어는 압출온도 290, 300, $310^{\circ}C$에서 성형되었다. 볼밀시간 32h 의 Zn-22Al 합금분말을 압출온도 $310^{\circ}C$에서 압출 시 표면 결함이 없는 소형 기어가 제조되었다. 경도분포는 기어 중심부와 치형부에서 불균일하였고 소결공정 후 내부 변형에너지의 차이로 인해 내부균열이 발생하였다. 위와 같은 문제를 해결하기 위해 온도 유지시간 제어를 이용한 하이브리드 압출 연구를 수행하였다. 압출된 스퍼기어의 평가는 압출하중, 비커스 경도 및 치수정밀도 측정을 통해 이루어졌다. 온도 유지시간 15min 에서 압출된 스퍼기어의 기계적 성질이 가장 우수하였다.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.110-117
• /
• 1987

본 논문에서는 터어빈과 콤프레셔 블레이드의 정밀예비현상 및 캠 부품의 제 조에 사용되는 원형소재로부터의 타원형재의 압출에 대한 일반적인 해석방법을 제안할 것이다. 해석결과는 실제 가공경화재인 알루미늄합금(Al2024)의 압출실험을 수행하 여 타당성을 검토하도록 할 것이며 기존의 해석 및 실험결과와도 비교 논의하도록 하 겠다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.196-200
• /
• 1996

In general, cylinderical types of billet are use in the backward extrusion. It is difficult to obtain homogenious wall thickness by the backward extrusion using these. It is gradually increased that improving the accuracyand reducing the post machining of the final products. In manufacturing cup shaped parts by backward extrusion, it is very important to design optimal initial billet or preform. These can improve the accuracy of final products and remove the post machining processes. In this study, the influence of final parts geometry by the shape of initial billet as non machined types are discussed.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.57-64
• /
• 1997

The process design of backward and forward extrusion of axisymmetric part has been studied in this paper. The important factors of cold forging process with complex geometry are the design of initial billet shape, the possibility of forming by one-stage operation and the determination of preform shapes, etc. Based on the systematic procedure of process sequence design, the forming operation of cold forged part is analyzed by the commercial finite element program, DEFORM. The design criteria are forming load, geo- metrical filling without defect and a sound distribution of effective strain in final product. It is noted that one step of preform operation is required to obtain the final product. Numerical result is compared with experi- mental one. It is found that the analyzed result is in good agreement with actual forming result.