• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.763-770
• /
• 2005

Global Navigation Satellite System (GNSS) has become an indispensable tool for providing precise position, velocity and time information for many applications like traditional surveying and navigation etc. However, Global Positioning System (GPS), which was developed and is maintained and operated by the U.S. Department of Defence (DoD), has monopolized the world industry and market, and hence there exists the situation that most of GNSS users absolutely depend upon the GPS. In order to overcome the monopoly, some countries, such as Russia, Japan and European Union (EU), have developed their own GNSSs, so-called GLONASS, JRANS and Galileo systems. Among them, the most prospective system in near future is EU's Galileo system scheduled to launch in 2008. This research has focused on the next generation GNSS system based on GPS and Gralileo system with developing a GNSS simulation software, named as GIMS2005, which generates and analyzes satellite constellation and measurements. Based on the software, a variety of simulation tests have been carried out to recognize limits of GPS-only system and potential benefits of integrated GPS/Galileo positioning. Geometry simulation results have showed that comparing with GPS-only case, the number qf visual satellites, Dilution of Precision (DOP) values, internal reliabilities and external reliabilities.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.373-383
• /
• 2008

LiDAR, unlike satellite imagery and aerial photographs, which provides irregularly distributed three-dimensional coordinates of ground surface, enables three-dimensional modeling. In this study, urban area was classified based on 3D information collected by LiDAR. Morphological and spatial properties are determined by the ratio of ground and non-ground point that are estimated with the number of ground reflected point data of LiDAR raw data. With this information, the residential and forest area could be classified in terms of height and density of trees. The intensity of the signal is distinguished by a statistical method, Jenk's Natural Break. Vegetative area (high or low density) and non-vegetative area (high or low density) are classified with reflective ratio of ground surface.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.3-9
• /
• 2007

Recently, the efforts of systematic understanding and utilization of geographic phenomenon for human life as a important factor among activity of mankind are increasing. It is necessary to express topography connected with space. Especially, the technology of geographic analysis using DEM can supply the information rapidly and accurately about elevation and terrain slope of the subject area under the necessity of high 3D quality geographic information. In this study, creating more precise DEM derived from LiDAR data, quantitative analysis on the subject area about elevation and terrain slope is done under comparison with Digital Topographic map Scale 1:1000. LiDAR data is more detailed than Digital Topographic map to express the elevation of the subject area ($39.89{\sim}77.48m$), and terrain slope by analysis using DEM derived from LiDAR data come out minutely about 90%. It can be concluded that the LiDAR data is very applicable and accurate for 3D topographic terrain slope analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.89-95
• /
• 1989

As most structures need all sided analysis, development of precise and ideal analytical techniques are required. In non-metric camera alone or metric and non-metric camera can be used for the purpose of measurement, the object will be analyzied economically and quickely. The purposes of this study are to suggest possibility of analysis of circular strip by means of Bundle Adjustment and to investigate efficiency of analytical method by combination of metric and non-metric camera. For these purposes, cylindrical structure was taken as the object and multiple convergent photographs changing ${\omega}$ and ${\phi}$, by which circular strip was formed, were analysed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.522-526
• /
• 2007

항공사진을 이용하여 하천의 경년변화를 조사하다 보면, 사주 변동에 따라 하천의 주 흐름이 다양하게 변화되고 있음을 알 수 있다. 이처럼 특정 하천의 지정된 구간에서의 흐름변동은 많은 시간에 걸쳐 이루어진다. 바꾸어 말하면, 짧은 시간 동안 자연하천에서의 주 흐름 변화를 관찰 하기는 일반적으로 매우 어렵다. 본 연구에서는 이틀이라는 짧은 시간 동안에, 하천에서의 주 흐름 변동에 따른 특성변화를 조사하였다. 이러한 조사는 "조정지 댐에서의 수문 조작"이라는 인위적인 방법을 동원함으로서 가능하였다. 모든 조정지 댐에서는 하천 유지를 위한 일정양의 물을 수문을 통하여 방류한다. 대청댐 하류에 있는 조정지 댐에는 폭이 약 10m에 이르는 10개의 수문이 있다. 평상시에는 우안으로부터 5번째에 있는 중앙의 수문을 개방하여 초당 약 18톤의 물을 방류한다. 그러므로 본 연구에서는 방류하고자 하는 지점의 수문높이를 조정하여 일정량을 유지한 채, 수문의 위치를 중앙에서 좌안 그리고 우안의 순으로 변경 하였다. 방류 수문 위치를 변경함에 따라 하천에서의 수리특성을 조사하기 위하여, 흐름이 안정 될 때까지 충분히 기다린 후, 각각의 경우에서의 하류지역을 대상으로 현지관측 및 수치실험을 실시하였다. 조사는, 첫째 지형측량, 유량측정 및 수위변동 등을 포함한 정밀현장조사, 둘째 일반적인 모델에 정밀조사 결과를 적용시킴으로서 얻을 수 있는 가시화 기법 개발 등의 순으로 진행하였다. 수치실험에 사용한 모델은 하천에서의 흐름거동을 2차원적으로 해석하는데 많이 사용되고 있는 상용프로그램인 SMS (Surface-Water Modeling System)의 RMA2 모형이다. 이모형은 RMA (Resource Management Associates, Inc.)에 의해 처음 개발된 2차원 유한요소 모델이며 지배방정식은 z방향을 수심 적분한 2차원 천수방정식으로, x와 y방향에 대한 Navier-Stokes 방정식과 연속 방정식으로 구성된다. 본 연구에서는 현장 조사 시 지배인자 파악의 중요성 및 수치계산을 위한 검증자료의 필요성을 강조하기 위하여, 일반적인 방법으로 수행한 계산 결과 및 다양한 현장 특성을 고려한 계산 결과를 비교 하였다. 그 결과 본 연구는 (1)최신 장비들의 도입 및 검증과 기존 장비의 활용 범위 확대, (2)기존의 상용 프로그램을 이용한 하천 흐름특성의 가시화 실현 등에 의의가 있다고 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.490-490
• /
• 2015

산림 사면에서의 토양층 수문반응은 물순환을 이해하는데 중요하다. 본 연구에서는 토양수분자료를 이용하여 토양수분의 계절적, 공간적 변화를 분석하였다. 연구대상지역은 경기도 파주시 적성면 설마리의 설마천 유역 내에 위치한 범륜사사면과 충청북도 음성군의 청미천 유역내의 수레의산사면이다. 정밀측량을 통해 획득한 수치고도모형(Digital Elevation Model, DEM)을 이용하여 관측지점들을 각각 선정하였다. 대상사면에 토양층별 토양수분의 분포변화를 분석하기 위해 각 지점별 10, 30, 60cm에서 토양수분량 측정시스템(Time Domain Reflectometry, TDR)방식의 토양수분측정장비(miniTRASE)를 설치하여 2시간 간격으로 2014년 3월부터 12월까지 토양수분을 측정하였다. 각 지점별 사면에서 획득된 토양수분 시계열자료는 토양수분의 시공간적 분포특성을 파악하기 위해 지점별 토양수분량의 통계분석(평균, 표준편차, 변동계수)를 수행하였다. 설마천유역의 범륜사사면에서는 2014년도에 특히 강우량이 적어 토양수분의 평균과 표준편차의 월별 변화에서는 기저토양수분 값을 주로 유지하고 강우에 대한 변동성이 크지 않은 것으로 나타났고, 청미천유역의 수레의산 사면에서는 시간적 토양수분변화는 계절적 강우분포 패턴에 따라 반응이 나타났다. 청미천유역의 토양수분자료를 이용하여 토양수분의 계절적, 공간적 변화를 분석한 결과 지표근처 토양층(10, 30cm)와 저층(60cm)에서의 공간적 변화특성이 다르게 나타났다. 이는 저층(60cm)에서의 지표하 흐름, 기반암 존재의 영향차이에 의한 것으로 판단되고, 사면의 위치에 따라 토양수분의 안정화 정도가 다른 것을 확인할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.15-26
• /
• 2012

Recently, due to applicability increase of vector data based digital map for geographic information and evolution of geographic measurement techniques, large volumed GIS(geographic information service) services having high resolution and large volumed data are flowing actively. This paper proposed an efficient vector map compression technique using the SEC(spatial energy compaction) based on classified bins for the vector map having 1cm detail and hugh range. We encoded polygon and polyline that are the main objects to express geographic information in the vector map. First, we classified 3 types of bins and allocated the number of bits for each bin using adjacencies among the objects. and then about each classified bin, energy compaction and or pre-defined VLC(variable length coding) were performed according to characteristics of classified bins. Finally, for same target map, while a vector simplification algorithm had about 13%, compression ratio in 1m resolution we confirmed our method having more than 80% encoding efficiencies about original vector map in the 1cm resolution. Also it has not only higher compression ratio but also faster computing speed than present SEC based compression algorithm through experimental results. Moreover, our algorithm presented much more high performances about accuracy and computing power than vector approximation algorithm on same data volume sizes.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.68-75
• /
• 2019

This study aims to look at the application methods of landscape architecture in response to the 4th Industrial Revolution. The results of the analysis of trends in the 4th Industrial Revolution and the subsequent search for application methods to the field of landscape architecture are as follows. First, the 4th Industrial Revolution means innovative change based on digital technology and seeks to create value based on intelligent information technology, and continuous growth is being made through innovation. This requires expertise to collect large amounts of information and creatively rework it, and a strategy to flexibly cope with changes in the times. Second, the status of technological use in response to the 4th Industrial Revolution in the field of landscape architecture is generalizing the establishment of precise analysis results such as survey technology and global mapping using drones, three-dimensional design simulation, and VR. In the field of traditional landscape architecture, efforts are made to obtain accurate fact-finding data on landscape site components. Third, the application methods in the field of landscape science according to the 4th Industrial Revolution in the future are required to supply precision technology and supply programs in the technology sector, and to provide a shared platform. In addition, a systemically standardized process will need to be established for this. In addition, educational efforts should be continued to professional manpower training and provide economic support for the development of technologies.

• Journal of the Korean earth science society
• /
• v.31 no.6
• /
• pp.555-562
• /
• 2010

Three-dimensional laser scanner was used to accurately measure any possible strain on a slope under pertaining stress with the time difference of 7 months. The laser scanner has the ability to measure the 3-D coordinate of a target point by calculating the travel time of laser beam between the laser device and the target point, and has been proved to be effective for analysis of the displacement of slopes or large construction. The scanning data measured with time difference were analyzed to find any strain by approaches of plane angle change, curvature variation, twist of frame, displacement of merging point, etc. From the analysis, some weak points showing heavily distorted shape were detected, which was used to design the reinforcement.

• Ocean and Polar Research
• /
• v.32 no.1
• /
• pp.73-84
• /
• 2010

A terrestrial LiDAR was used to acquire precise and high-resolution topographical information of Malipo beach, Korea. Terrestrial LiDAR and RTK-DGPS (VRS) were mounted on top of a survey vehicle and used to scan 20 times stop-and-go method with 250 m spacing intervals at ebb tides. In total, 7 measurements were made periodically from 2008 to 2009 and after each beach replenishment event. We carried out GIS-based 3D spatial analysis such as slope and volume calculations in order to assess topographical changes over time. In relation to beach replenishment, comparative analysis of each volume change revealed them to be similar. This result indicates that the terrestrial LiDAR measurements are accurate and can be used to analyze temporal topographical changes. In conclusion, the methodology employed in this study can be used efficiently to exercise coastal management through monitoring and analyzing beach process such as erosion and deposition.