• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.651-657
• /
• 2011

There exists a high correlation between the ionospheric delays and the integer ambiguity in GPS observation equation, so that the sufficient time span is required to revolve the integer ambiguity. This means that the ambiguity resolution plays a key role especially in rapid-static positioning mode. To analyze the effect of ionospheric disturbances on the positioning accuracy, 02/19/2011 day of dataset was selected processed in rapid-static positioning mode. The total of 141 30-minute sessions were processed, i.e., the estimation procedure started every 10 minutes, and the time-to-fix information of each data interval is obtained. In this study, the analysis is performed by comparing the time-to-fix with the magnitudes of ionospheric delays. The computed correlation coefficient between the time-to-fix and the magnitudes of ionospheric delays is 0.31, which indicates the ionospheric disturbances affect the positioning accuracy in rapid-static positioning mode. Therefore, it is required to collect and process sufficient data when the GPS surveying is performed in unfavorable ionospheric conditions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.148-148
• /
• 2016

홍수범람지도는 치수 대책 수립 등 다양한 목적으로 국내 주요하천에서 작성되고 있으며 범람 구역의 정확도를 높이기 위한 노력이 다각도로 수행되고 있다. 최근, 공간적으로 매우 정밀한 LiDAR 측량 성과를 기반한 DEM을 이용하거나 2차원 혹은 3차원 수치모델링을 적용하여 범람지도의 정확성 및 적용성이 획기적으로 개선되고 있다. 또한, 범람구역의 불확도에 관련된 연구도 다수 수행되고 있다. 그러나, 이러한 성과는 정밀 DEM 자료가 가용하거나 치수의 중요도가 높은 국가하천 지역에 국한되고 있으며 중소하천을 포함한 국가 전체 홍수지도 작성은 여전히 제한적으로 수행되고 있다. 중소하천의 경우, 공간해상도 및 정확도가 낮은 DEM과 1차원 모델링에 기반하여 범람지도의 신뢰도가 여전히 낮은 실정이다. 또한, 홍수지도 작성 기법은 비교적 잘 알려진 상황이나 작성 과정은 상당한 시간이 필요한 작업으로 지도 작성 시 실무에서 많은 비용과 시간이 소요되고 있어, 결과적으로 중소하천을 포괄한 홍수범람지도 작성에 장애요인으로 작용하고 있다. 따라서, 본 연구에서는 기존 하천기본계획에서 확보될 수 있는 하도단면 측량 등 표고 측량 성과를 활용하여 공간 해상도가 상대적으로 낮은 DEM을 정교화 및 상세화할 수 있는 개선기법 및 복잡한 범람지도 작성과정을 자동화하여 작성 소요시간을 현저히 줄일 수 있도록 하는 GIS 기반의 홍수범람지도 작성 자동화 툴을 개발하였다. 개발된 GIS 기반의 자동화 툴은 AIM(Automated Inundation Mapping tool)로 명명되었으며 ESRI사의 ArcObjects를 활용하여 개발되어 ArcGIS 기반으로 운영되며 현재 HEC-RAS 홍수위 자료가 입력자료로 작동되도록 설계되었다. 개선된 DEM과 AIM은 시범적으로 제주도 한천 하류에 적용되었으며 2007년 태풍 나리 시 발생한 범람흔적도와 비교했을 때 기존 방식에 비해 범람지도의 정확도와 작성시간(10초 가량 소요)이 상당부분 개선되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.121-128
• /
• 2009

The King George Island, where the King Sejong Station is located, represents one of the gateways to the Antarctica from the point of its geographical aspect. It also serves as an advanced post, and plays an important role in the extending for Korea's Antarctic research activities. The existence of maps is not only a basic element for the constructing geographic informations supporting these activities, but also an implied way of announcing the sovereignty over the KingSejong Station in global world. However, the precise surveying for the geographic information has not been carried out, and thus topographical maps as well as geographic information assuring enough accuracy are still missed in this area. This fact had forced Korea to rely on using maps produced by foreign countries. Therefore, this study aims to generate digital topographical maps of 1: 5,000 scale for the constructing geographic information using lightweight aerial photogrammetry system first. And further, it will contribute to offer practical base data for the future research related to the Antarctic environment through the analysis of glacier retreat and change using this new digital map comparing with existing one.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.527-537
• /
• 2014

In 2013, NGII(National Geographic Information Institute) has developed and provided the KNGeoid13(Korean National Geoid Model 2013) to support the fundamental computation of GNSS-derived orthometric height. In this study, the adjusted ellipsoidal height, the sum of geoidal height and height by the leveling, is applied to calculate the GNSS-derived orthometric height without the local bias, based on GNSS static surveying and KNGeoid13. The mean of errors in GNSS-derived orthometric heights could be verified with the leveling data, which was actually less than 0.5 cm with using the adjusted ellipsoidal heights, but 3 cm by calculating differences between ellipsoidal heights and geoidal heights. By analyze the accuracy of GNSS-derived orthometric height depending on the duration of observation, we could realized 95% of data shows less than 4 cm accuracy, when the GNSS survey conducting for 4 hours spread over two days, but while the case of GNSS survey conducting for 4 hours and 2 hours respectively, resulted in 95% of data less than 5cm level of accuracy. Also, if the ambiguity is fixed, less than 10cm of accuracy could be obtained at 95% of data for only 30 minutes GNSS survey over a day. Following the study, we expected that the height determination by GNSS and geoid models can be used in the public benchmark surveying.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.146-151
• /
• 2006

현재 국가지리정보유통망을 통해 유통되고 있는 수치지도(Digital map)는 대부분 항공 측량사진(Air survey Photographs)이나 위성영상(Satellite images)을 통해 취득된 토지 피복의 형상을 기반으로 제작된 지도들이다. 정사사진으로부터 취득된 지형정보를 기호화, 단순화한 수치지도는 실제 사물의 형태와 많은 차이가 있어 지형과 시설물의 변이를 사실대로 반영하지 못한다. 특히 최근 들어 지하시설물이나 건축기술의 발달로 층별 구조가 다양해진 건축물의 형태 등은 정사사진으로는 식별이 불가능하고 건물의 경우 지붕의 형태로 묘사되는 등 표현에 한계가 있다. 도심지역을 대상으로 제작된 1/1,000수치지형도나 일부 지자체나 공공기관 등에서 제작된 $1/500{\sim}1/2,500$ 수치지형도는 상세한 지형정보를 포함하고 있는 높은 정밀도의 수치지도이지만, 도시지역의 변이가 빠르게 일어나고 있기 때문에 자료 신뢰성과 최신성을 유지하는데 한계가 있다. 따라서 본 연구는 현지조사나 측량에 의존하고 있는 정사사진으로부터 취득이 불가능한 지형자료의 취득이나 수년단위인 갱신주기의 한계를 극복하고 실시간으로 수치지도를 수정갱신 할 수 있는 대안으로 일반측량성과도의 활용방안을 제시하고자 한다. 일반측량업에서 생산되는 일반측량성과도는 임시 도근점에 의해 측량을 실시하고 지적경계점과 현황기지점을 도해법에 의해 지적도와 중첩시켜 제작한 측량도로서, 일반측량 성과도에 절대좌표체계를 부여하고 수치지도와 매칭 기법을 제시함으로서 경제적이고 신속한 실시간 수치지도 수정갱신체계를 확립할 수 있고, 자료의 공유함으로써 중복측량을 방지할 수 있다.보 등)를 활용, 구축된다. 교통분석용 네트워크는 구축시점에 따라 현재 및 장래 네트워크로 구분되며 장래 네트워크는 기준년도부터 2031년까지 5년 단위로 계획된 장래도로를 반영하여 구축된다. 교통주제도 및 교통분석용 네트워크는 국가교통DB구축사업을 통해 구축된 자료로서 교통체계효율화법 제9조의4에 따라 공공기관이 교통정책 및 계획수립 등에 활용할 수 있도록 제공하고 있다. 건설교통부의 승인절차를 거쳐 제공하며 활용 후에는 갱신자료 및 활용결과를 통보하는 과정을 거치도록 되어있다. 교통주제도는 국가의 교통정책결정과 관련분야의 기초자료로서 다양하게 활용되고 있으며, 특히 ITS 노드/링크 기본지도로 활용되는 등 교통 분야의 중요한 지리정보로서 구축되고 있다..20{\pm}0.37L$, 72시간에 $1.33{\pm}0.33L$로 유의한 차이를 보였으므로(F=6.153, P=0.004), 술 후 폐환기능 회복에 효과가 있다. 4) 실험군과 대조군의 수술 후 노력성 폐활량은 수술 후 72시간에서 실험군이 $1.90{\pm}0.61L$, 대조군이 $1.51{\pm}0.38L$로 유의한 차이를 보였다(t=2.620, P=0.013). 5) 실험군과 대조군의 수술 후 일초 노력성 호기량은 수술 후 24시간에서 $1.33{\pm}0.56L,\;1.00{\ge}0.28L$로 유의한 차이를 보였고(t=2.530, P=0.017), 술 후 72시간에서 $1.72{\pm}0.65L,\;1.33{\pm}0.3L$로 유의한 차이를 보였다(t=2.540, P=0.016). 6) 대상자의

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.87-95
• /
• 2002

Real-time Kinematic GPS enables high accuracy Positioning by real time. If ambiguity use an integer solution, can obtain accuracy of several 'mm', and can obtain accuracy of tens 'em' if use real solution. In this study, We accomplish surveying by existent traditional surveying techniques (Total Station), Static GPS techniques and RTK-GPS techniques by Field Calibration about uniformity measuring point and then compared and ana1yzed each techniques positioning accuracy etc.. Result that achieve by Static-GPS in Plane area, about all measuring points, expressed error fewer than 3cm. Result that achieve RTK-GPS Surveying by Field Calibration in Plane area, could know that RTK-GPS techniques by Field Calibration is available in Plane area because expressing errors fewer than all 6cm, except case that do not get fixed solution of ambiguity Field Calibration RTK-GPS could know economically than existent conventional type measurement and existent GPS's measurement techniques that efficiency is very high.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.561-568
• /
• 2011

The purpose of this study is to measure displacements that occurs on a surface and interior of slope model and the shape when the slope is destroyed at vibration experiment of the slope model using close range photogrammetry. The circle targets and sphere targets are installed on a chamber and a slope model, while the earthquake wave are applied in regular time interval. The close range photogrammetric images are acquired in each displacements step until the slope model is destroyed. Those photos are processed by image processing method and the center points of targets are automatically extracted. Furthermore, the three-dimensional coordinates of targets are calculated by image orientation and bundle adjustment processing. As a result, amount of displacement at each level is precisely measured and provided the basic information for assessing the slope stability using three-dimensional measurement of the target movement and slope destruction.

• Journal of the Korean Geophysical Society
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2007

There are many risks in constructing tunnel-structure. To prevent these risks from occurring and secure safety, the precise and rapid survey of inside displacement of the tunnel is required. But nowadays the measurement of the crown settlement, convergency, and surface settlement depends on general kinds of method which use total station or level. In the way to provide data about maintaining structure according to recent improvement and progress of measuring technology, 3D laser scanning is used. It solves the problem of reliability in measuring displacement of existing structure, provides material that enables to estimate shape change of structure visually, and makes it possible to deliberate speedy countermeasure. By this three dimensioning it is possible to make efficient use of structure maintenance and field measurement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.525-531
• /
• 2021

The importance and utilization of underground spatial is increasing due to urban concentration. And so underground spatial information is being built. Because underground spatial information is an important NSDI (National Spatial Data Infrastructure), the accuracy and performance of underground spatial exploration devices used for construction are managed separately. In accordance with the laws and regulations related to spatial information, the government is conducting performance tests for underground facilities surveying equipment. The current performance test site mainly targets metal pipelines, and there is no absolute position surveying inspection system. In this study, test bed model for performance inspection of underground space exploration equipment was presented. The test bed presented in this study can be used as a test site to supplement the limitations of the existing domestic test bed and to verify the performance of the latest equipment.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.59-65
• /
• 2008

Digital close-range photogrammetric technique can measure and describe 3D geometric farm from 2D image. This technique is increasingly applied in the field of sciences. In the fields of civil and mechanical engineering, which need precise measurements for design, expensive measuring equipments are widely used. In occasions where visual inspection is required in addition to other forms of measurements, appropriate measuring equipments have not been yet available. This study utilizes digital close-range photogrammetric technique to quantitatively analyze behavior patterns before and after destruction from test model of reinforced-soil wall. Then the results are compared with the measurements obtained using digital theodolite to verify the reliability of the proposed method.