• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.145-151
• /
• 1998

In this study, the experimental and analytic investigation with cold air system has been performed for improving the working environment of the conventional grinding fluid. Very simple cold air system was developed which could replace by the conventional grinding fluid system. The identification of heat of grinding Bone is very important for precision grinding. The experimental data was analysed to investigate the heat which was transferred to the workpiece. It was found that 45∼55％ of the total energy for dry grinding, 22∼28％ for wet grinding, and 32∼35％ for cold air system are conducted to the workpiece in grinding with cubic boron nitride wheel. Cubic boron nitride wheel could reduce the residual stress and thermal demage comparing with aluminium oxide wheel, because cubic boron nitride wheel has very high extreme thermal conductivity.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.99-105
• /
• 1995

This paper provides a highly efficient grinding for ferrous materials using ELID-grinding method. The grinding efficiency using ELID gring method with CIFB-cBN wheel and CB-cBN wheel is compared with general grinding method with V-cBN wheel. This paper measured grinding ratio for plunge grinding and grinding resistance for traverse grinding in order to investigate grinding ability. The results show that ELID grinding methods is useful for the high efficient grinding of ferrous materials.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.58-64
• /
• 2002

In these days, according to increasing the technical development, the dimension of a product goes up for ultra-precision. For the net shape manufacturing, grinding is a important process that influences directly the accuracy and the integrity of produced products. In this study, an experimental evaluation was carried out. Workpiece materials were used STD11, SUS304, and STB2 in accordance with varing condition of feedrate and depth of cut. From measuring the grinding force and the surface roughness, material characteristics of grinding by using CBN wheel were examined.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.7-12
• /
• 2003

각광을 받고 있는 광통신 분야의 핵심부품인 페룰은 일본이 전 세계의 95%를 장악하고 있다. 국내에서도 일부 업체에서 양산을 하고 있으나, 핵심 연삭공정에 사용되는 연삭 가공장비는 전량 수입되고 있는 실정이다. 페룰은 0.1∼0.3$\mu\textrm{m}$의 동심도, ${\pm}$ 0.2$\mu\textrm{m}$의 외경치수, 0.1$\mu\textrm{m}$대의 진원도와 원통도, 10nm의 표면 거칠기를 구현해야 세계적 경쟁력을 갖출 수 있는 초미세, 초정밀 기계가공 부품이다.(중략)

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.219-229
• /
• 1994

This paper describes an expert system on the cylindrical grinding operations in order to establish the optimum grinding conditions, which satisfy the maximum removal rates, considering the several constraints of grinding power, workpiece burn, chatter vibration and surface roughness. Specialized knowledge of the grinding operations are acquired from the actual operation database. Coefficientis in the experimental equations are obtaines through the fuzzy regression model based on the fuzzy set theory, and are stored in the actual operation database. The developed system is capable of determining the optimum grinding conditions taking into account some problems, and practical examples of implementaion are described.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.165-170
• /
• 2001

In normal grinding abrasive particles of a grinding wheel rotate on planes parallel to the direction of workpiece fred. which may induce continued scratch lines on ground surface as the workpiece feeds. Instead in helical scan grinding the planes make an angle, called a helical angle, with the feeding direction. Thus scratch lines produced by abrasive particles per one revolution are discontinued which implies that the generation of scratch lines are suppressed by the helical scan grinding. In this study some experimental works have been done on the helical scan grinding of glass to find the effects of grinding conditions on the surface roughness and estimate the optimal grinding conditions. The helical angle, fred rate, material removal rate and the wheel speed are taken as factors for three kinds of grinding wheels i.e., coarse(#140 mesh), medium(#400) and fine(#800) diamond wheels. The experiments are scheduled by Taguchi technique and ANOVA has been carried out for the interpretation of the results. As a result of this study effects of the factors are verified quantitatively showing that the major factors are changed according to the wheel's mesh size and the helical angle is one of the influencing factors on the surface quality.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.20-25
• /
• 2003

21세기 초고속 통신시스템 구축의 핵심 부품인 고정밀도의 광페룰(Fig. 1)의 수요는 획기적으로 증가할 것으로 전망된다. 전 세계 광페룰 생산량의 90% 정도를 일본에서 생산하고 있으며, 현재 국내 업체들도 일본산 가공설비를 대부분 도입하여 광페룰을 생산하고 있으나 품질 수준이나 생산량에서 아직 미미한 형편이다. 광페룰의 품질수준은 통신 품질의 향상 욕구에 따라 점점 높은 정밀도와 동심도가 요구되고 있으며 정밀도에 따른 가격의 차는 수배에 달하고 있다.(중략)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.623-624
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.747-748
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 춘계학술대회 논문집
• /
• pp.458-461
• /
• 1994

최근에 상품의 국제경쟁력 강화를 위해서 생산공정 시간의 단축과전문 기능인력의 부족에 대응하는 중소로 트의 다품종 생산 합리화가 기계 제조업 전체에 확산되어 가고 있다. 본 연구에서는 연삭기용 유정압 주 축의 일반적인 형태인 전부, 후부 유정압 베어링의 장착구조 대신에 기존의 정, 동특성을 유지하면서 저가의 전부 유정압베어링과 후부 Angular Contact Ball Bearing의 복합배열 구조를 제시하고 이때의 정적, 동적 성능을 이론적으로 비교, 평가하였다.