• 제목/요약/키워드: 정면밀링

검색결과 60건 처리시간 0.024초

전단유동응력에 의한 정면밀링의 절삭력 해석 (Force Analysis of the Face Milling Process by Shear Flow Stress Model)

  • 이우영;신효철
    • 대한기계학회논문집
    • /
    • 제13권6호
    • /
    • pp.1170-1182
    • /
    • 1989
  • 본 연구에서는 해석 기하학적인 접근 방법으로서 전단응력으로 표현되는 3차원 절삭이론을 유도하고 이것을 정면밀링의 해석에 적용하여 기본적인 파라메트 들은 실험이 비교적 용이한 선삭에서 결정하고 그들을 이용하여 밀링절삭력을 유효 하게 예측할 수 있도록 하는 방법을 제시하였다.

Al2024의 고속 정면밀링 가공에서 표면 거칠기에 관한 연구 (A Study on Surface roughness in High speed face milling machining of Al2024)

  • 장성민
    • 한국산학기술학회논문지
    • /
    • 제15권2호
    • /
    • pp.603-608
    • /
    • 2014
  • 항공기와 자동차 부품과 관련된 많은 제조업에서, 낮은 비중과 높은 강도에서 뛰어난 알루미늄 합금(Al2024)은 효과적으로 사용되었다. 가공소재의 표면거칠기 품위를 위한 정면밀링 가공기술은 이들 분야에서 적용되어 왔다. 챔퍼된 드로우 어웨이 타입의 인서트를 갖는 정면밀링 가공은 단지 이론적으로 완전한 평면을 생산할 수 있다. 그러나 그것은 절삭온도, 소성변형, 동적효과 등으로 인하여 불가능하다. 본 논문에서 실험적 연구는 검증된 고속가공이 가능한 정면밀링커터 바디를 사용하여 Al2024의 고속가공 후 표면거칠기를 개선하기 위하여 수행되었다.

2차원 절삭이론을 이용한 정면밀링 절삭력 예측 (Predicting Cutting Forces in Face Milling with the Orthogonal Machining Theory)

  • 김국원
    • 한국정밀공학회지
    • /
    • 제19권12호
    • /
    • pp.150-157
    • /
    • 2002
  • This paper presents an effective cutting force model that enable us to predict the instantaneous cutting force in face milling from a knowledge of the work material properties and cutting conditions. The development of the model is based on the orthogonal machining theory with the effective rake angle which is defined in the plane containing the cutting velocity and chip flow vectors. Face milling testes are performed at different feeds and, a fairly good agreement is shown between the predicted cutting forces and test results.

정면밀링작업에서 가공면의 형상예측에 관한 연구

  • 백대균;김희술
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 춘계학술대회 논문집
    • /
    • pp.131-136
    • /
    • 1995
  • 최근 기계가공이 CAD/CAM화되고 가공기술이 고정밀화, 고능률화 되어감에 따라 절삭공정에 대한 정확한 모델이 필요하다. 절삭공정에서 공작물의 정밀도나 가공능률에가장 큰 영향을 미치는 것이 절삭력과 표면거칠기로서 이의 해석을 위해서 절삭력 모델과 표면거칠기 모델이 사용되고 있다. 본 연구에서는 정면밀링가공에서 인서 트 초기오차와 날의 형상을 고려하여보다 쉬운 표면조도 모델을 세우고, 절삭과정을 진동계로 모델링하여 3차 원 동적 표면형상을 예측하고자 한다. 도한 본 모델을 이용하여 정면밀링작업에서 최적의 절삭조건을 찾고자 한다. 밀링가공에서 표면조도는 날딩 이송과 함께 인서트 초기위치오차에 의하여크게 좌우 되기 때문에 최적 의 이송을 찾아서 알맞은 표면조도를 얻고 절삭효율을 높이기는 힘들다. 따라서 본 연구에서 개발한 표면조도 모델을 이용하여 최적의 이송을 찾아서 목적에 합당한 표면조도를 얻고, 또한 절삭효율도 높일 수 있는 방법을 제시하고자 한다.

  • PDF

최적 설계된 정면밀링용 공구의 절삭성에 대한 연구

  • 김정현;백대균;김희술
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 춘계학술대회 논문집
    • /
    • pp.81-85
    • /
    • 1993
  • 정면밀링은 급속 가공을 매우 효율적으로수행할 수 있기 때문에 널리 사용되고 있다. 그러나 밀링커트는 단속 절삭 공구로서 절삭날의 단속절삭작용에 의한 변동적삭력과 여러날의 동시가공에의한 절삭력의 교란 때문에 절삭성이 기계가공에 문제가 되어 왔다. 이러한 문제점들을 해결하기 위하여 기계설계자들은 절삭 력의 교란에 의하여 일어나는 진동을 줄이기 위하여 기계구조의 강성을 증가시켰으나 이것은 비용이 많이 들게 되므로 공구 형상을 개선하여 안정된 절삭을 시도하였다. 본 연구에서는 절삭력 모델을 이용하여 변위 발생의 원인인 절삭력변동을 최소로 하는 커터의 형상을 3차원으로 최적 설계하였다. 최적 설계 제작된 공 구와 재래식 공구를 사용하여 절삭력, 공구수명, 표면조도를 측정하였다. 최적 설계 제작된 공구와 재래식 공구에 의하여 측정된 결과들을 비교 검토하여개발된 공구의 절삭특성을 규명하였다.

정면밀링 절삭력 예측을 위한 이론적 모델링 (Theoretical Modeling for the Prediction of Face Milling Forces)

  • 김국원;이우영;최성주
    • 한국기계가공학회지
    • /
    • 제7권3호
    • /
    • pp.96-102
    • /
    • 2008
  • In order to design establish automation or optimization of the machining process, predictions of the forces in machining are often needed. In this paper, a theoretical model in face milling is presented based on Oxley's predictive machining theory, where the cutting forces are predicted from input data of fundamental work material properties, tool geometry and cutting conditions without any preliminary cutting experiment. A simulation system for the cutting forces in face milling is developed using the model. Milling experimental tests are conducted to verify the model and the predictive results are compared and discussed with the experimental results.

  • PDF

정면밀링에서 공구경사각에 따른 비절삭저항 변화 (Variation of Specific Cutting Pressure with Different Tool Rake Angles in Face Milling)

  • 류시형
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 춘계학술대회 논문집
    • /
    • pp.63-68
    • /
    • 1996
  • In this study, the effect of tool rake angles and the change of cutting conditions on specific cutting pressure in face milling is investigated. The cutting force in face milling is predicted from the double cutting edge model in 3-dimensional cutting. Conventional specific cutting pressure model is modified by considering the variation of tool rake angles. Effectiveness of the modified cutting force model is verified by the experiments using special face milling cutters with different cutter pockets and various rake angles. From the comparison of the pressented model and the specific cutting pressure, it is shown that the axial force can be predicted by the tangential and redial forces without the knowledge of friction angle and shear angle. Also, the relation between specific cutting pressure and cutting cindition including feedrate, cutting velocity and depth of cut is studied.

  • PDF

최소 절삭력형 정면밀링 커터의 동적거동에 관한 연구 (A Study about Dynamic Behavior of the Face Milling Cutter to Minimize Resultant Cutting Force)

  • Kim, J.H.
    • 한국정밀공학회지
    • /
    • 제13권4호
    • /
    • pp.87-96
    • /
    • 1996
  • On face milling operation a newly optimal tool, which can minimize the resultant cutting forces resulted from the cutting force model, was designed and manufactrued. Cutting experiments using the new and conventional tools were carried out and the cutting forces resulted from those tools were analyzed in time and frequency domains. The performance of the optimized cutter was tested through the dynamic cutting forces resulted form the newly designed tool are much reduced in comparision with those from the conventional tool. By reducing the dynamic cutting force fluctuations, machine tool vibrations can be reduced, and stable cutting operation can be carried out.

  • PDF

정면밀링작업에서의 최적절삭조건 선정

  • 소환철;김희술
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 춘계학술대회 논문집
    • /
    • pp.61-65
    • /
    • 1993
  • 절삭작업에 있어서 생산기술자가 제품을 경제적으로 생산하기 위해서는 기계의 사양이나 요구되는 제품의 정밀도 등 을 고려하여 목적에 맞는 절삭조건을 선택하여야 한다. 특히 임금이 과거에비해 크게 오르고 기계의 가격이 자동화로 인하여 고가가 됨에 따라서 기계의 효율적 운용이 점점 더 중요하게 되었다. 따라서 목적에 맞는 절삭조건의 선정은 기업의 경쟁력 향상에 있어서 중요한 문제로 부상되고 있다. 본 논문에서는 정면밀링작업시, 인서트 초기위치오차( Runout)를 고려한 표면조도와 절삭력 시뮬레이션 프로그램을 이용하여 구한 허용동력을 제한조건으로 고려하여 보다 실제에 가까운 상황에서 최소비용과 최대 생산율을 얻도록 프로그램을 개발하였다.

정면 밀링 가공에서의 절삭력 예측을 위한 비절삭 저항 모델링 (Modeling of the Specific Cutting Pressure to Predict the Cutting Force in Face Milling)

  • 주정훈;김국원
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2008년도 춘계학술발표논문집
    • /
    • pp.306-308
    • /
    • 2008
  • 본 논문은 정면 밀링 가공에서의 절삭력 예측을 위한 수학적 모델을 설정하고 컴퓨터 시뮬레이션을 수행하였다. 실험으로 얻은 절삭력 데이터를 이용하여 비절삭 저항을 모델링하였고 컴퓨터 시뮬레이션을 통해 절삭력을 예측하였다. 예측된 절삭력은 실제 실험을 통해 얻은 절삭력과 비교하여 본 모델의 타당성을 검증하였다.

  • PDF