• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.586-589
• /
• 2012

표절과 관련된 이슈가 주목받고 있는 상황에서 표절을 검출하는 방법에 대한 연구가 활발히 진행되고 있다. 일반적으로 표절구간 검출을 위해 복잡한 자연어처리와 같은 의미론적 접근방법이 아닌 비교적 단순한 어휘기반의 문자열 처리 방법을 사용한다. 대표적인 방법으로는 지문법 (Fingerprinting)과 서열정렬 (Sequence alignment) 등이 있다. 하지만 이 방법들을 이용하여 대용량 문서에 대한 표절검사를 수행하기에는 시공간적 복잡도의 문제가 발생한다. 본 논문에서는 이러한 단점을 극복하기 위해 NGS (Next Generation Sequencing)에서 사용하는 BWT (Burrows-Wheeler Transform)[1]를 이용한 탐색방법을 응용한다. 또한 부분표절구간을 검출하고 정확도를 향상시키기 위해 질의문서를 분할하여 작은 조각으로 만든 뒤, 조각들에 대한 질의탐색을 수행한다. 본 논문에서는 질의문서를 분할하는 두 가지 방법을 소개한다. 두 가지 방법은 k-mer analysis를 이용한 방법과 random-split analysis를 이용한 방법으로, 각 방법의 장단점을 실험을 통해 분석하고 실제 부분표절구간의 검출 정확도를 측정하였다.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.1
• /
• pp.1-15
• /
• 2021

Objective: The aim of this study was to investigate 1) the difference in static lower extremity alignment (SLEA) according to a history of lateral ankle sprain (LAS), 2) to identify SLEA factors affecting LAS, and 3) to present the cut-off value and 4) the usefulness and limitations of the SLEA measurement. Method: This case-control study recruited 88 men (age: 27.78±4.69 yrs) and 39 women (age: 24.62±4.20 yrs) subjects with and without LAS. SLEA measurement protocol included Q angle, tibiofemoral angle, genu recurvatum, rear foot (RF) angle, tibal varum and torsion, navicular drop, ankle dorsiflexion range of motion (DF ROM). Independent t-test, logistic regression and receiver operating characteristic (ROC) curve were used for statistical analysis. Results: Men with a history of LAS had significantly smaller Q angles both in standing and in supine position, while women with a history of LAS had significantly greater DF ROM in non-weight bearing (NWB; p < 0.05). Logistic regression model suggests tibial varum (OR = 0.779, p = 0.021) and WB DF ROM (OR = 1.067, p = 0.045) were associated with LAS in men. In case of women, there were no significant SLEA factors for LAS, however, ROC curve analysis revealed standing RF angle (AUC = 0.647, p = 0.028) and NWB DF ROM (AUC = 0.648, p = 0.026) could be affecting factors for LAS. Conclusion: There are differences in SLEA according to the history of LAS, furthermore, the identified items were different by sex. In case of men, tibial varum and WB DF ROM affect LAS occurrence. Standing RF angle and NWB DF ROM of women could be a predictor for LAS. However, since the sensitivity and specificity in most of the SLEA measurements are low, kinematic in dynamic tasks should be considered together for a more accurate evaluation of LAS risk.

• Journal of the Korean Society of Radiology
• /
• v.6 no.4
• /
• pp.281-290
• /
• 2012

The difference of radiation dose of MDCT due to different protocols between hospitals was analyzed by CTDI, DLP, the number of Slice and the number of DLP/Slice in 30 cases of the head, the abdomen and the chest that have 10 cases each from MDCT examination of the department of diagnostic imaging of three general hospitals in Gyeongsangbuk-do. The difference of image quality, CTDI, DLP, radiation dose in the eye and radiation dose in thyroid was analyzed after both helical scan and normal scan for head CT were performed because a protocol of head CT is relatively simple and head CT is the most frequent case. Head CT was significantly higher in two-thirds of hospitals compared to A hospital that does not exceed a CTDI diagnostic reference level (IAEA 50mGy, Korea 60mGy) (p<0.001). DLP was higher in one-third of hospitals than a diagnostic reference level of IAEA 1,050mGy.cm and Korea 1,000mGy.cm and two-thirds exceeded the recommendation of Korea and those were significantly higher than A hospital that does not exceed a diagnostic reference level (p<0.001). Abdomen CT showed 119mGy that was higher than a diagnostic reference level of IAEA 25mGy and Korea 20mGy in one-third. DLP in all hospitals was higher that Korea recommendation of 700mGy.cm. Among target hospitals, C hospital showed high radiation dose in all tests because MPR and 3D were of great importance due to low pitch and high Tube Curren. To analyze the difference of radiation dose by scan methods, normal scan and helical scan for head CT of the same patient were performed. In the result, CTDI and DLP of helical CT were higher 63.4% and 93.7% than normal scan (p<0.05, p<0.01). However, normal scan of radiation dose in thyroid was higher 87.26% (p<0.01). Beam of helical CT looked like a bell in the deep part and the marginal part so thyroid was exposed with low radiation dose deviated from central beam. In addition, helical scan used Gantry angle perpendicularly and normal scan used it parallel to the orbitomeatal line. Therefore, radiation dose in thyroid decreased in helical scan. However, a protocol in this study showed higher radiation dose than diagnostic reference level of KFDA. To obey the recommendation of KFDA, low Tube Curren and high pitch were demanded. In this study, the difference of image quality between normal scan and helical scan was not significant. Therefore, a standardized protocol of normal scan was generally used and protective gear for thyroid was needed except a special case. We studied a part of CT cases in the local area. Therefore, the result could not represent the entire cases. However, we confirmed that patient's radiation dose in some cases exceeded the recommendation and the deviation between hospitals was observed. To improve this issue, doctors of diagnostic imaging or technologists of radiology should perform CT by the optimized protocol to decrease a level of CT radiation and also reveal radiation dose for the right to know of patients. However, they had little understanding of the situation. Therefore, the effort of relevant agencies with education program for CT radiation dose, release of radiation dose from CT examination and addition of radiation dose control and open CT contents into evaluation for hospital services and certification, and also the effort of health professionals with the best protocol to realize optimized CT examination.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.94-101
• /
• 2014

Recently, in order to reduce the time required to replace an optical jumper cord, many researchers are using a field-installable connector and applying the ferrule polishing method, ferrule mechanical contact method, or ferrule fusion contact method. However, the process of arranging the length of the optical fiber, i.e., inserting the optical fiber into the ferrule by hand and checking its cross section, takes 60% of the time required for the entire process, which increases the overall cost. Therefore, in order to make this task more cost-effective, we will develop an automated inspection system with automatic cross-sectional arrangement of a field-installable connector. This system will be able to decrease the failure rate from 10% to 2% compared with the conventional method when cutting the optical fiber inserted into the ferrule. It will also improve the productivity by decreasing the test time by 28% compared with the conventional method. Our studies showed that it was possible to reduce the production costs and improve the quality of a field-installable connector, and we expect it to dominate the market.

• The Journal of the Korean bone and joint tumor society
• /
• v.10 no.1
• /
• pp.56-60
• /
• 2004

A bone island represents a focus of mature compact bone within the cancellous bone. It can be diagnosed based on characteristic clinical and radiologic features. The lesion is typically asymptomatic with a preference for the pelvis, femur, and other long bones. On the radiologic study, the lesion appears as an ovoid, round, or oblong homogeneously dense and sclerotic focus in the cancellous bone. Characteristic feature of this lesion is radiating bony streaks, known as "thorny radiations" or "pseudopodia". Most bone islands are small, and majority of the lesions measure from 0.1 to 2.0 cm. Giant bone island, defined as a diameter greater than 2 cm, has been rarely reported in the literature. We report a case of giant bone island measured by 10${\times}$1.7${\times}$1 cm in the diaphysis of right tibia in 31-year-old man.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.449-449
• /
• 2013

최근 반도체 소자의 집적회로는 점점 복잡해지고 있는 반면, 소자의 크기는 작아지고 있으며 그로 인해 패드의 크기가 작아지고 패드사이의 간격 또한 협소해지고 있다. 따라서 웨이퍼 단계에서 제조된 집적회로의 불량여부를 판단하기위한 검사 장비인 프로브카드(Probe Card)의 높은 집적도가 요구되고 있다. 하지만 기존의 MEMS 공법으로 제작되는 프로브 빔은 복잡한 제조 공정과 높은 생산비용, 낮은 집적도의 문제점을 가지고 있다. 본 연구에서는 이러한 문제점을 해결하기 위하여 간단한 제조 공정과 낮은 생산비용, 높은 집적도를 가지는 프로브 빔을 개발하기 위하여 절연절단 방식으로 BeCu (Beryllium-Copper) 프로브 빔을 제작하였다. 낮은 소비 전력으로 우수한 프로브 빔 어레이를 제작하기 위해서 가장 고려해야할 대상은 프로브 빔의 재료와 구조(형상)이다. 절연전단 방식으로 프로브 빔을 형성할 때 요구되는 Fusing current는 프로브 빔의 구조(형상)에 크게 영향을 받는다. 낮은 Fusing current는 소비 전력을 줄여주고, 절연절단으로 형성되는 프로브 빔의 단면(끝)을 날카롭게 하여 프로브 빔과 집적회로의 패드 간의 접촉 저항을 감소시킨다. 프로브 빔의 제작은 BeCu 박판을 빔 형태로 식각하여 제작하였으며, 실리콘 비아 홀(Via hole) 구조의 기판위에 정렬하여 soldering 공정을 통해 실리콘 기판과 BeCu 박판을 접합시켰다. 접합된 프로브 빔의 끝부분을 들어 올린 상태로 전류를 인가하여 stress free 상태로 만들어 내부 응력을 제거하였으며, BeCu 박판에 fusing current를 인가하여 BeCu 박판 프레임으로부터 제거를 하였다. 제작된 프로브 빔의 길이는 1.7 mm, 폭은 $50{\mu}m$, 두께는 $15{\mu}m$, 절단부의 단면적은 1$50{\mu}m^2$로 제작되었다. 그리고 프로브 빔의 절단부의 길이는 $50{\mu}m$ 부터 $90{\mu}m$까지 $10{\mu}m$ 증가시켜 제작되었다. 이후에 절연절단 공정에 요구되는 Fusing current를 측정하였고, 절연절단 후의 절단면의 형상을 SEM (Scanning Electron Microscope)장비를 통하여 확인하였다. 절단부의 길이가 $50{\mu}m$일 때 5.98A의 fusing current를 얻었으며, 절연절단 후 절단부 상태 또한 가장 우수했다. 본 연구에서 제안된 프로브 빔 제작 방법은 프로브카드 및 테스트 소켓(Test socket) 생산에 응용이 가능하리라 기대한다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.59-65
• /
• 2004

Root perforations that result in a communication of the root space with the periodontal tissues occasionally occur during endodontic procedures. They may be induced iatrogenically. Successful treatment depends mainly on immediate sealing of the perforation and prevention of infection. Several factors affect the achievement of these goals, most important of which are time of occurrence, size and location of the perforation. Identification of root perforations is possible by direct observation of bleeding, radiography and an apex locator. Perforation defects may be repaired by nonsurgical or surgical techniques. We report two cases of root perforation. One was treated by glass ionomer, other was treated by composite resin with calcium hydroxide.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.583-590
• /
• 2004

The autofocus is one of the important processes in the automated vision inspection or measurements using optical microscopes, because it influences the measuring accuracy. In this paper, we used the confocal microscope configuration based on not a pinhole but a single-mode optical fiber. A single mode fiber has the functions of source and detector by applying the reciprocal scheme. As a result, we acquired a simple system configuration and easy alignment of the optical axis. Also, we embodied a fast autofocus system by acquiring the focus error signal through a source modulation technique. The source modulation technique can effectively reduce physical disturbances compared with objective lens modulation, and it is easily applicable to general optical microscopes. The focus error signal was measured with respect to the modulation amplitude, reflectance of the specimen and inclination angle of the measuring surface. The performance of the proposed autofocus system was verified through autofocusing flat mirror surface. In addition, we confirmed that source modulation rarely degrades the depth resolution by the comparison between the FWHMs of axial response curves.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.293-300
• /
• 2011

This study was to find out the effect of cervical and thoracic stretching and strengthening exercise program on forward head posture. 32 adults had forward head posture were selected as the subjects for the study. The training program of the exercise group(n=16) consist of postural education with exercise program, subjects in the control group(n=16) participated in a postural education only. Postural measurements of Craniovertebral Angle(CVA) and Cranial Rotation Angle(CRA) were obtained from the using x-ray and PACS(Picture Archiving and Communications System) ${\pi}view^{TM}$. The results were compared with change of CVA and CRA exercise group were significant(p<.05) compared to the control group. However CRA of contol group was significant(P<.05). Also, there were no significant difference(p>.05) between groups on any pre-test measure. however there were significant difference(p<.05) between groups on CVA and CRA post-test measure. This study showed that cervical and thoracic stretching and strengthening exercise program can improve spinal posture alignment for decreasing forward head posture in subjects. These results can be fundamental data for further development of exercise program in interventions of postural improvement.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.1
• /
• pp.7-15
• /
• 2010

Anterior knee pain syndrome would best be defined as a painful condition that arises in or around the patellofemoral joint and is insidious in onset and bilateral, with an enigmatic entity with multiple causes. Although its etiology is uncertain, the cause is often considered to be abnormal lower limb biomechanics, pathology of extensor mechanism, disorder of patellofemoral joint, malalignment or lateral tracking of the patella, soft tissue tightness, muscle weakness. The measurement of patellar alignment has come to be accepted as an integral part of the examination of anterior knee pain syndrome. Various measurement techniques exist, both clinical and radiological, and these have been frequently used in the diagnosis and treatment of the condition.?Treatment depends on the underlying cause of anterior knee pain and should be directed to the cause rather than to the results. Most often, this involves non-surgical measures, such as anti-inflammatory medications, quadriceps exercises, and hamstring stretching. Shin splint, or medial tibial stress syndrome refers a syndrome of pain running along the inner distal 2/3 of tibia shaft. Shin splint is a common problem for athletes whose sport involves a repeated, jarring impact to the leg. A major factor determining the efficacy of the treatment is that correct diagnosis be made of the problem. The varied etiology has led to the development of several theories as to the cause, treatment, rehabilitation and prevention of shin splint. The management is rest, ice massages, pain relief by medication, and muscle strengthening exercise. Proper rehabilitation and preventative measures can ensure that there is no further recurrence.