• Title/Summary/Keyword: 정기 자동차검사

Search Result 8, Processing Time 0.023 seconds

A Study on Increasing Reliability of Braking Force Inspection During Regular Inspection of Vehicles (자동차 정기검사에서 제동력 검사의 신뢰성 향상에 관한 연구)

  • Oh, Sang Yeob
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.40 no.8
    • /
    • pp.725-729
    • /
    • 2016
  • The regular inspection of vehicles that are in service in domestic country, i.e., vehicle safety and emission gas inspection have been forced by the korea transportation safety authority and a private servicing enterprise according to the vehicle administration law (1995). In the safety inspection process, which is developed by a compatible inspection system and method, every effort is made to increase the reliability of vehicle safety and the service quality, and to protecting national health. In this study, the reliability of the braking force inspection method in the current regular vehicle inspection was studied statistically by comparing the dynamic braking force inspection method with the static braking force inspection method. Further, the problems and characteristics of the current braking force inspection methods were analyzed. Form the results for the dynamic braking force inspection equipment (H), a mean correction factor (y=18.61+2.18x) was obtained for the axle braking force ratio according to vehicle entering velocity.

Development of Inspection Elements for the Periodic Inspection of Large Buses with AEBS and LDWS Installed (AEBS와 LDWS가 장착된 대형버스의 정기검사를 위한 검사요소 개발)

  • Park, Sanghyeop;Han, Jongho;Yoon, Yoonki;Lee, Taehee;Lee, Hosang;Kang, Byungdo
    • Journal of Auto-vehicle Safety Association
    • /
    • v.13 no.2
    • /
    • pp.42-49
    • /
    • 2021
  • In this paper, we proposes a study on the derivation of inspection factors for the periodic inspection of large buses equipped with AEBS and LDWS. we investigate the safety evaluation (NCAP) of domestic and foreign vehicles and safety standards for the two functions currently in operation and analyze the evaluation factors, measurement methods and evaluation scenarios and so on. In addition, the test scenario was derived by analyzing the vehicle safety evaluation data already held, Therefore, we use an real large bus and the inspection elements for the periodic inspection were derived.

A Consideration on the Inspection Frequency of the Periodic Technical Vehicle Inspection (자동차 정기검사 주기에 관한 고찰)

  • Lim, J.M.;Jung, Y.D.;Yeo, U.S.;Kang, B.D.;Youn, Y.H.
    • Journal of Auto-vehicle Safety Association
    • /
    • v.4 no.2
    • /
    • pp.17-21
    • /
    • 2012
  • The periodic technical vehicle inspection is to prevent the accident through the finding and fixing the defects of the vehicle. The periodic technical vehicle inspection in Korea was studied for assessing the adequacy of the inspection frequency. The inspection frequencies of many countries including EU, USA and Japan were compared. The average mileages by the vehicle usage and type were represented. The warranty period and recommended replacement period of parts of the domestic auto makers was studied. Currently, the inspection frequency for the periodic technical vehicle inspection in Korea is appropriate. The pass-fail rate and the cost-benefit analysis for the periodic technical inspection in Korea will be needed in the decision making process for the inspection frequency.

Automated Inspection System Using Image Processing Technology for Automotive Components (영상처리 기법을 이용한 자동차부품의 자동검사시스템 개발)

  • Park, Jung-Kee;Jung, Won
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.4 no.3
    • /
    • pp.71-78
    • /
    • 1999
  • This paper presents an integrated and automated inspection system using image processing technology for the automotive engine assembly process. The system make it possible for the inspected data to be entered directly from the machine vision into the statistical process control system. Such direct entry enables the prompt preparation of corrective actions against process problems. An IVP-150 machine vision board is installed within the PC for image processing, and a template matching technology is implemented to precisely verify quality factors. The developed system showed robustness to the problems of noise, distortion, and orientation.

  • PDF

Effects of Regular Inspection Facility Standards Improvement on Particulate Matter (PM10) Emissions (정기검사 시설기준 개선이 입자상물질(PM10) 배출에 미치는 영향)

  • Choi, Soungkyu;Kim, Yongdal;Lee, Jaeyoung;Kim, Hogyeong;Noh, Kiseong;Park, Jungsoo
    • Journal of Auto-vehicle Safety Association
    • /
    • v.11 no.1
    • /
    • pp.36-39
    • /
    • 2019
  • The particulate matter that was emitted always come up by atmospheric environmental problem. Running on the road vehicles must have regular inspection at regular period and make sure the emissions of exhaust gases exceed the legal standards. Emission test for the atmospheric environment, but it is not free from the particulate matter. Currently, emission test of vehicle inspection is divided into regular inspection and close inspection. Regular inspection and close inspection differ not only the method of emission test, but also the facility standards that must have for this inspection. According to the "Regulations on the Implementation of Comprehensive vehicle Inspection, etc.", close inspection must have trapping device that is trap particulate matter by emission test to vehicle. However, regular inspection is different. Regular inspection do not specify any criteria for trapping facilities. Therefore, this study is confirm how to prevent the emission of particulate matter to the atmosphere during the year when mandatory trapping facilities are required to trapped particulate matter in the regular inspection.

Suggestion for Safety Improvement of Compressed Natural Gas Vehicle (압축천연가스 자동차의 안전성 향상을 위한 제언)

  • Kim, Young-Seob;Park, Kyo-Shik;Kim, Tae-Ok
    • Journal of the Korean Institute of Gas
    • /
    • v.16 no.4
    • /
    • pp.1-7
    • /
    • 2012
  • Systematic safety research by Korea Government has been made to enhance the safety of CNG (compressed natural gas) vehicles since the burst of compressed cylinder of an urban bus in August 9, 2010. This article summarizes some major activities to ensure the safety of CNG vehicles, which covers review of regulation, safety management system including standard of inspection and certification, and training program of inspectors and car mechanics. Specifically, the followings were reviewed; type of CNG cylinder, location of CNG cylinder, material and type of fuel line and vent line, modification of pipeline connection, installation of gas detector, installation of emergency shutdown valve, installation of protecting cover for cylinder, obligations for CNG vehicle filling station. improving periodical inspection, routine test on gas vehicles, training program for engaged in gas vehicles, and designation of safety manager for CNG bus company. This paper suggests how to improve safety of CNG vehicles as a result of review of above mentioned check items.

Forecasting of Inspection Demand for Pressure Vessels in Hydrogen Fuel Cell Electric Vehicle using Bass Diffusion Model (Bass 확산모델을 이용한 수소전기차 내압용기 검사수요 예측)

  • Kim, Ji-Yu;Kim, Eui-Soo
    • Journal of the Korean Institute of Gas
    • /
    • v.25 no.3
    • /
    • pp.16-26
    • /
    • 2021
  • The global warming problem has arose, the supply eco-friendly vehicles such as HFCEVs is increasing around world and Korea is fully supporting subsidies, tax cut to form an initial market for HFCEVs. The key to the safety of HFCEVs is pressure vessels stored hydrogen, and although these pressure vessels must be inspection regularly, the existing inspection stations are insufficient to meet the demand for inspection. Therefore, it is important to establishment of pressure vessels inspection station for safety management of HFCEVs. In this study, it estimates innovation coefficient, imitation coefficient in Bass model by using electric vehicle sales data, and foretasted the supply of HFCEVs by region & the demand for inspection by region using the Bass diffusion model. As a result, the inspection demand for pressure vessels in HFCEVs in 2040 was 690,759 units, and it was confirmed 191 new inspection stations and 1,124 inspectors were needed to prepare for this.

Test Case Generation for Simulink/Stateflow Model Based on a Modified Rapidly Exploring Random Tree Algorithm (변형된 RRT 알고리즘 기반 Simulink/Stateflow 모델 테스트 케이스 생성)

  • Park, Han Gon;Chung, Ki Hyun;Choi, Kyung Hee
    • KIPS Transactions on Software and Data Engineering
    • /
    • v.5 no.12
    • /
    • pp.653-662
    • /
    • 2016
  • This paper describes a test case generation algorithm for Simulink/Stateflow models based on the Rapidly exploring Random Tree (RRT) algorithm that has been successfully applied to path finding. An important factor influencing the performance of the RRT algorithm is the metric used for calculating the distance between the nodes in the RRT space. Since a test case for a Simulink/Stateflow (SL/SF) model is an input sequence to check a specific condition (called a test target in this paper) at a specific status of the model, it is necessary to drive the model to the status before checking the condition. A status maps to a node of the RRT. It is usually necessary to check various conditions at a specific status. For example, when the specific status represents an SL/SF model state from which multiple transitions are made, we must check multiple conditions to measure the transition coverage. We propose a unique distance calculation metric, based on the observation that the test targets are gathered around some specific status such as an SL/SF state, named key nodes in this paper. The proposed metric increases the probability that an RRT is extended from key nodes by imposing penalties to non-key nodes. A test case generation algorithm utilizing the proposed metric is proposed. Three models of Electrical Control Units (ECUs) embedded in a commercial vehicle are used for the performance evaluation. The performances are evaluated in terms of penalties and compared with those of the algorithm using a typical RRT algorithm.