Park, Hyo-Derk;Lee, Jae-Suk;Kim, Kun-Nyun;Park, Jong-Wan;Shin, Sang-Mo
Journal of Sensor Science and Technology
/
v.3
no.3
/
pp.9-15
/
1994
Catalytic combustible gas sensors were fabricated by using ${\gamma}-Al_{2}O_{3}$ with large surface area and noble metal catalysts. The optimum conditions for ${\gamma}-Al_{2}O_{3}$ fabrication were investigated by DT/TGA and XRD analyses and it was found that fabricated ${\gamma}-Al_{2}O_{3}$ had superior value as surface area of $215.5m^{2}/g$. Gas sensors were manufactured and tested to inflammable gases by using Pt coil as a heater and temperature sensing part, fine ${\gamma}-Al_{2}O_{3}$ powder as a bead material and Pt, Pd noble metal powder as a catalyst. From the results, fabricated sensor showed good sensitivity to LPG and LNG of 20mV/l000ppm, 6.5mV/l000ppm respectively.
최근에는 통신기술과 인터넷의 발달로 원격의 사람과 전화, 이메일, 메신저 또는 화상회의 시스템 등을 통해서 쉽게 의사소통 할 수 있다. 이 시스템들은 주로 음성, 그림, 동영상 또는 문자 기반의 시청각 정보를 서로 주고 받으며 자신의 의사 및 감정을 전달하는 통로를 제공한다. 그러나 일상 생활에서 시청각 정보 외에 촉감 정보도 서로 의사소통 하는데 중요한 역할을 한다. 악수, 포옹 등의 촉감 상호작용은 사람 사이에서 친근감을 표시하는데 가장 직접적인 방법으로 자신의 감정을 전달하거나 느낌을 표현하는데 사용된다. 그럼에도 불구하고 촉감 상호작용을 가능케 하는 의사소통 시스템의 연구는 아직 폭넓게 진행되고 있지 않다. 본 논문에서는 일상에서와 같이 원격에서도 상대를 바라 볼 수 있고 자연스럽게 접촉할 수 있는 원격 촉감 커뮤니케이션 시스템을 제안한다. 이 시스템에서는 로컬 사용자가 손가락으로 상대의 몸 특정 부위를 만질 수 있고 서로 그 촉감을 실시간으로 느낄 수 있다. 이 시스템은 크게 AR 시스템, 그래픽 시스템, 햅틱 시스템, 택타일 시스템의 부시스템들로 나눌 수 있다. AR 시스템에서는 몸의 한 부위에 사각형의 AR 마커를 부착한 원격 사용자를 웹카메라로 촬영하고 ARToolKit 을 사용하여 마커의 위치를 측정한다. AR 마커의 바로 밑에는 택타일 장치가 장착되어 있으며 이 부위를 통하여 원격의 사용자는 로컬사용자가 자신의 팔을 만지는 느낌을 받게된다. 그래픽 시스템은 로컬사용자에게 촬영된 원격 사용자와 측정된 마커의 위치가 대표하는 원격 사용자의 가상 피부, 그리고 자신의 가상 손가락을 보여준다. 햅틱 시스템에서는 촉감 장치를 사용하여 로컬 사용자의 손가락 위치를 구하여 원격 사용자의 가상 피부와 접촉했을 때 그 충돌을 감지하고 접촉력을 계산하여 촉감 장치에 반영함으로써 그 접촉력을 느낄 수 있도록 한다. 택타일 시스템에서는 원격 사용자의 AR 마커 밑에 장착된 배열 타입의 진동 촉감 장치에 접촉 정보를 주어 로컬 사용자와 접촉 했을 때 접촉 부위에 진동을 줌으로써 촉감을 느끼도록 한다.
Park, Joung-Man;Jang, Jung-Hoon;Wang, Zuo-Jia;Kwon, Dong-Jun;Park, Jong-Kyu;Lee, Woo-Il
Journal of the Korean Society for Nondestructive Testing
/
v.30
no.5
/
pp.411-422
/
2010
Self-sensing on micro-failure, dispersion degree and relating properties, of carbon nanotube(CNT)/epoxy composites, were investigated using wettability, electro-micromechanical technique with acoustic emission(AE). Specimens were prepared from neat epoxy as well as composites with untreated and acid-treated CNT. Degree of dispersion was evaluated comparatively by measuring volumetric electrical resistivity and its standard deviation. Apparent modulus containing the stress transfer was higher for acid-treated CNT composite than for the untreated case. Applied cyclic loading responded well for a single carbon fiber/CNT-epoxy composite by the change in contact resistivity. The interfacial shear strength between a single carbon fiber and CNT-epoxy, determined in a fiber pullout test, was lower than that between a single carbon fiber and neat epoxy. Regarding on micro-damage sensing using electrical resistivity measurement with AE, the stepwise increment in electrical resistivity was observed for a single carbon fiber/CNT -epoxy composite. On the other hand, electrical resistivity increased infinitely right after the first carbon fiber breaks for a single carbon fiber/neat epoxy composite. The occurrence of AE events of added CNT composites was much higher than the neat epoxy case, due to micro failure at the interfaces by added CNTs.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.20
no.6
/
pp.175-182
/
2020
The non-contact eye tracking is a nonintrusive human-computer interface providing hands-free communications for people with severe disabilities. Recently. it is expected to do an important role in non-contact systems due to the recent coronavirus COVID-19, etc. This paper proposes a novel approach for an eye mouse using an eye tracking method based on a context-aware based AdaBoost multi-region classifier and ASSL algorithm. The conventional AdaBoost algorithm, however, cannot provide sufficiently reliable performance in face tracking for eye cursor pointing estimation, because it cannot take advantage of the spatial context relations among facial features. Therefore, we propose the eye-region context based AdaBoost multiple classifier for the efficient non-contact gaze tracking and mouse implementation. The proposed method detects, tracks, and aggregates various eye features to evaluate the gaze and adjusts active and semi-supervised learning based on the on-screen cursor. The proposed system has been successfully employed in eye location, and it can also be used to detect and track eye features. This system controls the computer cursor along the user's gaze and it was postprocessing by applying Gaussian modeling to prevent shaking during the real-time tracking using Kalman filter. In this system, target objects were randomly generated and the eye tracking performance was analyzed according to the Fits law in real time. It is expected that the utilization of non-contact interfaces.
1980년대 초, IBM의 과학자들에 의해 양자역학 현상에 기초한 새로운 현미경이 발명되었다. 뾰족한 금속 팁에 전압을 걸고 전도성 시료의 표면에 접근시키면, 팁이 표면에 접촉하기 직전에 터널링에 의한 전류가 흐르게 된다. 이 전류는 거리에 매우 민감해서 고체 표면에 배열된 원자들에 의해 형성되는 표면 굴곡 (surface corrugation)이 분간 가능하였다. 이 기계가 바로 STM (Scanning Tunneling Microscope)이다 (그럼 1). 이 발명이 있기까지의 약 2세기 가량의 시간 동안 "누구에 의해서도 결코 감지된 적 없는" (H. J. Robinson, Physics Today, March, 24, 1984.) 원자와 분자는 과학자들의 논리 속에 이론상으로 존재할 뿐이었다. STM의 발명으로 인해 인류는 바야흐로 개개의 원자와 분자를 직접적으로 감지할 수 있게 되었던 것이다. 처음으로 STM을 이용하여 원자해상도로 본 표면은 실리콘의 안정한 표면인 Si (111)-7${\times}$7 표면이었는데, 이러한 실리콘 표면의 STM 사진의 예를 그림 2에 나타내었다. (중략)타내었다. (중략)
Proceedings of the Korean Geotechical Society Conference
/
2007.09a
/
pp.115-123
/
2007
설계 하중이 큰 대형 구조물의 기초로 많이 사용되는 현장타설말뚝은 현장에서 지반을 굴착하여 조립된 철근망을 삽입한 후, 콘크리트를 타설하여 제작되므로 복잡한 시공 과정과 현장의 특수한 지하수 및 지반 조건으로 인하여 현장타설말뚝의 내부에는 결함이 포함될 수 있다. 발생 가능한 대표적인 결함으로 연약한 말뚝 선단, 말뚝체 콘크리트의 품질 저하, 말뚝과 지반의 접촉 불량, 주 철근의 부식 등이 있으며, 이들 결함을 감지하기 위한 건전도 시험법으로 공대공초음파 검층, 충격반향시험, 충격응답시험, 감마-감마 검층법 등이 있다. 결함은 말뚝의 수평지지력을 감소시키며, 일반적으로 발생하는 비대칭단면 결함에 의한 응력 집중현상과 수평 하중에 의한 휨모멘트는 연직지지거동에 영향을 준다. 따라서 결함을 감지하고 평가하는 것이 현장타설말뚝의 품질관리에 있어 매우 중요하다.
Transactions of the Korean Society of Automotive Engineers
/
v.21
no.5
/
pp.1-7
/
2013
The present paper relates to a development of the Gear Detection Sensor for automotive manual transmission. To detect air gap from control finger to detecting zone of sensor based on non-contacted method, permanent magnet and linear type Hall IC are mounted in this sensor. Control finger is machined to 3 step heights to detect 3 gear stages such as In-Gear, Normal and Rear. After conducting actual experimentation based on exclusive Jig and FEM, it is described to consider possibility for automotive application of Gear Detection Sensor.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2017.05a
/
pp.229-232
/
2017
기존의 이동방향 인식 시스템은 개인의 스마트폰 내부에 있는 센서 중 자이로/가속도 센서를 이용하여 측정하였다. 자이로/가속도 센서는 외부의 영향을 거의 받지 않아 정확도가 높다고 볼 수 있지만, 스마트폰의 위치에 따라 정확도가 변한다. 따라서, 기존의 이동방향 인식 시스템은 개인의 이동방향을 감지하기에는 적합하나 다수의 보행자에 대한 이동방향을 시스템에서 인식하기에는 부적합하다. 본 논문에서는 다수의 보행자에 대한 이동방향을 인식하기 위해 압전센서 어레이를 이용하여 특정 구역의 바닥에 설치하고 보행자와 압전센서 사이의 접촉형태와 개수를 파악하고, 시간을 측정하여 보행자의 이동방향을 계산한다.
Journal of the Korea Institute of Information and Communication Engineering
/
v.23
no.1
/
pp.70-76
/
2019
Ultra Wideband (UWB) Radar is a high-resolution radar for short distance detection which uses signals transmitted and received by each antennas in order to detect a target. It is possible to detect the respiration and heartbeat of a person without contact It is getting more and more often utilized since it is not affected by physical environment. In this paper, we implement an algorithm to detect human respiration and heartbeat rate using UWB radar signal. We process radar signals reflected from human body using Median filter, Kalman filter, Band Pass filter and so on. We also use CZT to extract breathing and heart rate. ECG (Electrocardiogram) was used for comparison of heartbeat data and we confirm that each data of ECG and UWB Radar were more than 98% identical each other.
Proceedings of the Korean Society of Computer Information Conference
/
2012.07a
/
pp.407-408
/
2012
본 논문에서는 코일을 이용한 비접촉 방식의 맥박 측정 시스템의 효율적인 설계 방안을 제시한다. 인덕턴스와 커패시턴스의 값에 따라 발진 주파수가 변동되는 콜피츠 발진기를 사용함으로써 혈류의 흐름에 따른 인덕턴스의 변화를 측정하였다. 실험은 2가지로 구성되며 첫 번째는 코일 위에 손가락을 올려놓은 상태로 측정하는 방식이며 두 번째는 반지 형식으로 감겨진 코일을 손가락 끝에 착용하였을 때이다. 코일 내부에서 가장 높은 자력선 밀도를 가지므로 첫 번째 방식보다 두 번째 방식에서 더 높은 투자율의 변화를 감지할 수 있다. 결과적으로 광용적맥파 신호와의 비교 실험을 통하여 맥파로서의 유의성을 검증하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.