Journal of the Korean Society for Precision Engineering
/
v.10
no.1
/
pp.22-27
/
1993
산업기술의 발달에 따라 각 분야마다 정밀한 부품을 요구하고 있다. 이는 이들 부품이 시스템의 성능에 영향을 미치고 있기 때문이다. 부품의 정도는 길이정도와 표면의 정도를 모두 의미한다. 길이정도는 부품의 상대적 크기정도를, 표면정도는 3차원 형상정도를 나타낸다. 이들 부품의 정도를 평가하기 위해서는 반드시 측정이라는 방법이 수행되어야 하며, 측정은 요구되는 측정정도에 따라 이에 상용되는 방법으로 행해지게 된다. 요구되는 측정정도는 시간이 지남에 따라 점차 증가되고 있다. 이 러한 경향은 그림1의 시대에 따른 측정정도를 보면 확인할 수 있다. 시대에 따라 측정정도는 급격히 증가하고 있고 현재의 측정은 초정밀측정이라 말하는 약 0.1nm의 정밀도를 갖고 있다. 측정정도에 따라 표면측정기술도 여러가지 방법이 행해지고 있는데 이들 측정방법은 크게 접촉식 측정방법과 비접촉 측정 방법으로 나눌 수 있다. 대표적인 접촉식 측정방법으로는 촉침식 측정방법을 들 수 있다. 이 방법은 다이아몬드 촉침을 표면상에 접촉하여 주사이동하게 하고 이때 표면의 요철에 따른 촉침의 상하운동을 고성능 변위센서를 이용하여 표면형상을 측정하는 것이다. 이는1nm의 수직분해능을 갖고 측정이 가능 하다. 이 방법은 표면에 접촉함으로 인해 신뢰성이 높지만, 표면의 접촉압력으로 인해 표면의 손상 우려가 있다. 이런 이유로 현재 비접촉 측정방법이 주목받고 있다. 표면측정을 실현하는 데에는 광학 기술이 적극적으로 활용되고 있으며, 최근에는 물리학의 원리들이 도입되고 있다. 본 글에서는 이러한 측정기술의 기본원리를 소개하고 각 기술이 응용되는 예를 소개하고자 한다.
Artificial acid rain(pH 3.0, 4.0 and 5.0) and ground water(pH 6.5) were treated on the potted seedlings of Pinus rigida and Pinus koraiensis to examine its effects on the contact angles on needle surface. Artificial acid rain was prepared by diluting sulfuric acid with ground water and ground water(pH 6.5) was used as control. Artificial acid rain was sprayed to the pots two times per week for growing season, one time per week for winter seasons. About 5mm of artificial acid rain was treated each time from late April, 1992 to early October, 1993. Contact angles on the needle surface were measured and compared among the treatments. The results were summarized as follows. Contact angles between needle surface and water droplet decreased with decrease of pH values of artificial acid rain. Measuring and comparing contact angles might be very effective criteria for early diagnosis of acid rain injury in the field.
저작은 교합과 악운동 뿐만 아리라 근신경계, 고위 중추까지 복합적으로 관여하는 기능적 행위이다. 교합 양상은 다양하게 저작 형태에 영향을 끼치며 저작 효율에도 관여한다. 저작 형태는 다양한 모양을 가지나 두가지 전형적인 군 즉, 전방에서 관찰시 그 양상이 수직적이며 chopping운동을 닮은 군과 저작 형태가 주로 측방으로 이루어지며 grinding을 하는 군으로 나눌 수 있다. 본 연구의 목적은 저작 형태의 치아가 교합접촉 및 저작 효율에 미치는 영향을 고찰해 보고자 하는 것이다. 하악운동궤적기록기를 이용하여 정상교합을 가진 치과대학생중 전형적인 2가지 저작형태를 보이는 각 10명씩을 피검자로 선택하였다. 3가지 하악위 즉, 중심위, 작업측 비작업측에서의 교합접촉을 고무형 교합인기재로 기록하여 천공부의 직경이 1mm이하면 1점, 1-2mm또는 직선상이면 2점, 2mm이상이면 3점으로 평가하여 각 점수의 합으로 좌우 소구치 및 대구치의 접촉 지수를 측정하였다. 저작 효율을 평가하기 위해 땅콩 3g(${\pm}0.01g$)을 20회 저작하게 한 후 3회 입을 헹구어 뱉게 하였다. 체눈 크기가 각 0.425, 0.60, 0.85, 2.0, 4.0인 체에 거른 후 $65^{\circ}C$로 오븐에서 세시간 말려 무게를 측정하고 중심 크기$(M_{50})$과 저작효율치(R)를 계산 비교하여 다음과 같은 결론을 얻었다. 1. Chopping형은 grinding형에 비해 중심위에서 더 넓은 교합접촉을 보였다(P<0.01). 2. Grinding형은 chopping형에 비해 측방위에서 더 넓은 교합접촉을 보였다(P<0.01). 3. Chopping형은 중심크기($(M_{50})$)과 저작효율치(R)로 비교하였을 때 더 좋은 저작 효율을 보였다(P<0.01).
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.264-264
/
2011
Poly [(N, N'-oxydiphenylene) pyromellitimide], polyimide (PI) film은 기계적 강도가 매우 우수하고 열적, 화학적 안정성이 뛰어난 재료로서 전자제품의 소형화, 경령화, 고성능화를 위한 차세대 flexible electronic device에 적용하기 위하여 많은 연구가 진행되고 있다. 그러나 PI의 특성상, 매우 낮은 표면에너지로 인해 금속과의 접촉력이 좋지 않은 단점을 가지고 있다. 본 연구에서는, 금속박막과 PI film 과의 접촉력을 증가시키기 위해 remote-type modified dielectric barrier discharge (DBD) module을 이용하여 대기압 플라즈마 표면처리를 하였다. 실험에 사용된 gas composition은 각각 $N_2$/ He/ $SF_6$, $N_2$/ He/ $O_2$, $N_2$/ He/ $SF_6$/ $O_2$, $N_2$/ He/ $SF_6$/ $O_2$ 이다. $N_2$/ He/ $SF_6$/ $O_2$ gas composition을 이용하여 PI 표면을 플라즈마 처리한 경우, C=O 결합이 PI film 위에 생성됨으로써, 접촉각이 매우 낮게 형성됨을 관찰할 수 있었다. 이와는 반대로 $N_2$/ He/ $SF_6$ gas composition 을 사용하였을 경우에는 C-Fx 화학적 결합이 생성되기 때문에 가장 높은 접촉각이 형성됨을 관찰할 수 있었다. 특히, $N_2$ (40 slm)/ He (1 slm)/ $SF_6$ (1.2 slm) gas composition에 $O_2$ gas를 0.2 slm부터 1.0 slm까지 변화시켜가며 PI film 표면을 처리한 결과, $O_2$ gas를 0.9 slm 첨가하였을 때, 가장 낮은 $9.3^{\circ}$의 접촉각을 얻을 수 있었다. 이는 0.9 slm의 $O_2$ gas를 첨가하였을 때, 가장 많은 양의 $O_2$ radical이 생성되기 때문에 많은 양의 C=O 결합이 생성되기 때문이다. 최적화된 $N_2$ (40 slm)/ He (1 slm)/ $SF_6$ (1.2 slm)/ $O_2$ (0.9 slm) gas composition 조건에서 Ag film과 PI film과의 접촉력을 관찰할 결과, 111 gf/mm를 얻을 수 있었다.
Journal of Dental Rehabilitation and Applied Science
/
v.24
no.1
/
pp.105-112
/
2008
The purpose of this study was to evaluate the contact angle made by 3 kinds of self etching primers (Clearfil SE Bond, AdheSE, and Tyrian) on dentin and to measure the microtensile bond strength of resin composite to dentin using these self-etching primers. Contact angle between each of 3 self etching primers and polished dentin surface was measured (n=30) by contact angle analyzer and the result was analyzed by One-way ANOVA. For the measurement of microtensile bond strength, polished dentin surface was treated with each of 3 self etching primers and dentin adhesives. Z-250 composite resin was built-up with a height of 5 mm on the adhesive-treated surface and light cured for 40s with a halogen light curing unit. Thereafter, each tooth was sectioned into slabs perpendicular to the bonded interface and trimmed (n=45). The microtensile bond strength was measured with universal testing machine and the result was analyzed with Kruskal-Wallis test. AdheSE group showed the highest contact angle followed by Clearfil SE group and Tyrian group (p<0.05). AdheSE group and Clearfil SE group showed significantly higher microtensile bond strength than Tyrian group (P<0.05).
Proceedings of the Korean Institute of Surface Engineering Conference
/
2012.05a
/
pp.335-335
/
2012
금속 박막과 PI film 과의 접촉력을 증가시키기 위하여 remote - type modified dielectric barrier discharge (DBD) module을 이용하여 대기압 플라즈마 표면 처리를 실시한 결과, 접촉각이 매우 낮게 형성됨을 관찰 할 수 있었다.
Surface of Polymethylmethacrylate (PMMA) was modified by ion assisted reaction in which ion beam of Ar or$ O_2$is irradiated on polymer in reaction gas environment. Ion beam energy was changed from 600 to 1000eV, and ion doses were varied from $5\times10^{14} ions/cm^2 to 1\times10^{17} ions/cm^2$. Contact angle and surface energy of modified PMMA were measured by contact angle micrometer using distilled water and formamide. In the case of $Ar^+$ ion irradiation only, the contact angle reduced from $68^{\circ} to $35^{\circ}$ and the surface energy was changed from 46 dyne/cm to 60 dyne/cm. The contact angle significantly decreased to $14^{\circ}$and the surface energy increased to 72 dyne/cm when the surface of PMMA was modified by oxygen ion irradiation in oxygen gas environment. Improvement of wettability results from the formation of new hydrophilic group which is identified as C-O chain by XPS analysis. Recovery of wettability in dry air and maintenance of it in water condition were explained in view of the formation of hydrophilic group.
Kim, Hyeon-Seung;Kim, Wang-Ryeol;Kim, Byeong-Cheol;Song, Seon-Gu;Han, Seon-Hong;Gwon, Min-Cheol
Proceedings of the Korean Institute of Surface Engineering Conference
/
2013.05a
/
pp.122-123
/
2013
각종 전자 제품 및 첨단 산업 장비에 TSP (Touch Screen Panel) 적용이 늘어나고 있다. TSP 표면에 기본적으로 적용되는 지문방지코팅 (Anti Fingerprint coating, AF coating)의 공정 조건 변화가 신뢰성에 어떠한 영향을 미치는지에 대하여 연구하였다. 본 연구에서는 전 코팅 공정에 포함되는 전처리, 중간층 공정의 유무에 따라 특성분석을 진행하였으며 이를 비교 분석하였다. 특성 분석은 최초접촉각과 내마모시험 후 접촉각을 측정하여 비교하였으며, 전처리와 중간층 공정이 모두 포함된 표준 지문방지코팅막이 내마모시험 3000 회를 거친 후에도 접촉각을 유지함으로서 가장 우수함을 알 수 있었다. 또한 TEM (Transmission Electron Microscope) 촬영을 통하여 각 층의 경계면에 결함이 발견되지 않았다. 이는 전처리 공정과 중간층 공정을 통하여 박막의 접합력과 내구성을 향상시켰다고 사료된다. 하지만 공정의 단순화와 TSP의 대형화 추세에 맞춰 새로운 방법의 지문방지코팅 공정개발이라는 과제도 남겼다.
Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
/
2008.10a
/
pp.265-268
/
2008
본 연구에서는 대기압 플라즈마의 처리 조건에 따른 Tri-acteyl-cellulose (TAC) 필름의 접착력 향상을 위한 접촉각 및 표면에너지의 변화를 관찰하였다. 대기압 플라즈마의 처리 변수로는 처리 속도, 방전 전력, 시료와 플라즈마 헤드 사이의 간격 및 $N_2$ 가스 유속이며, 각각의 처리 변수가 TAC 필름의 표면 특성 변화에 미치는 영향을 조사하였다. 실험결과 방전전력 및 $N_2$ 유량이 증가할수록 접촉각은 낮아지고 표면에너지는 증가하였다. 그리고 시료와 플라즈마 헤드 사이의 방전 간격은 2[mm]에서 접촉각이 낮고 표면에너지가 높게 나타나 TAC 필름의 접착력 향상을 위한 친수성 물질로 표면 개질됨을 확인할 수 있었다.
Journal of the Korean Society of Clothing and Textiles
/
v.27
no.5
/
pp.554-559
/
2003
A newly developed contact angle measurement instrument by laser beam projection allows for rapid and direct determination of contact angles. The instrument may have a possibility to characterize newly developed nano-fibers. When the laser beam impinges on an edge of an interface of liquid and solid, projected beam were split across and made two straight lines on a tangent screen. From the result, it could measure the contact angle directly by reading the angle between two split beams. The purpose of this study was to prove reliability and reproducibility of the contact angle measurement instrument by laser beam projection compare to the conventional one by microscope through the comparative experiment and questionnaire. Test samples were selected by consideration of hydrophilic and hydrophobic, such as nylon 6 and polypropylene, respectively. The laser contact angle measurement has accurate, fast and convenient method to measure contact angle, and it can be a unique method to characterize nano-fibers.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.