• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.148-149
• /
• 2000

황금배는 1967년에 신고에 이십세기를 교배하여 1977년 1차선발과 1982년 2차선발을 거 쳐 1984년 최종선발, 명명한 품종으로, 당도가 높고 육질이 부드러워서 최근 몇년 사이에 캐 나다, 미국, 호주, 그리고 유럽 지역에서의 수요가 급증하고 있는 수출전망이 매우 밝은 품 종 중의 하나이다(92년 재배면적 lOha 수출량 5. 8M/T, 95년 재배면적 150ha 수출량 2 200.6M/T), 황금배는 비교적 대과이고 과형은 원형에 가까운 편원형으로서 사과 골든처럼 과피가 황금색이고 과육은 연황백색으로 투명하며 보기에 극히 미려한 특징이 있다. 아울러 육질이 유연치밀하고 과즙이 극히 많으며 당도가 높아 13$^{\circ}$ Bx이상, 15도 Bx까지 측정되는 둥 감산이 적화되어 맛이 극히 우수하다. 그러나 이러한 황금배는 동녹, 흑반병 등 병충해로 인한 상품가치의 하락으로 현재 수요를 충족시키지 못하고 있는 실정이다. 1 16세기부터 씌워진 과실봉지는 초기 병해충을 방지할 목적만으로 사용되어 왔지만, 현 재는 방균과 방충의 효과와 함께 자연현상의 최적화를 위한 차광성, 발수성, 투기성을 조절 하며 과실의 외관까지 영향을 미치는 바, 과실봉지의 기능성 부여를 위해서는 고도의 기술 력이 요구되고 있다 하겠다. 상기한 배에 방균방충처리된 과설봉지를 씌워서 재배하면 농 약 살포횟수를 줄이고 배에 농약이 직접 묻지 않아 배의 농약오염을 예방할 수 있으며, 봉 지 안으로의 해충이나 균의 침투를 원천적으로 봉쇄할 수 있다. 그러나 기존의 황금배용 봉 지는 비록 기타 병충해 피해를 방지하는 효과는 있었으나, 동녹을 억제하는 효력이 다소 미 흡하였다. 과피의 비정상적인 코르크화로 인해 발생하는 동녹은 과피의 물리적 할렬과 생리적 장 해에 의해 발생하는 것으로 알려져 있다(永澤 1940). 과실이 비대해짐에 따라 과피의 기공 (과점)이 할렬하면서 코르크화가 진행되는데 그 발생정도나 시기는 배의 품종에 따라 다르 나 일반적으로 코르크화는 기상조건, 특히 습도와 밀접한 관련이 있다고 알려져 있다 황금 배의 재배에 봉지를 적용하면 일반적으로 과피의 코르크화가 억제되는데 그러한 이유는 다 음과 같이 설명할 수 있다. 과실은 하루를 주기로 하여 수축과 팽창을 반복하면서 비대화하 는데 이러한 현상은 과실 내의 수분 조건에 따르는 것으로, 봉지재배의 경우 무대재배보다 단기간에 변화되는 습도의 범위가 좁아 급변을 방지하기에 과점의 할렬이 완화될 수 있다. 즉, 봉지를 씌웅으로서 봉지 내의 대기 환경이 외기보다 안정적으로 유지되고 직사광선이나 농약 및 마찰로부터 과실을 보호해 주기에 동녹이 어느 정도 방지될 수 있는 것이다. 그러나 기존의 황금배봉지는 동녹의 정도를 완화시킬 뿐 완전히 방지할 수 없었으며, 봉지를 적 용한 재배조건에서의 동녹발생 기구를 정확히 이해하지 못했었기에 효과적으로 봉지의 기능 을 개선하는 것이 불가능하였다. 과설의 미려도는 과실의 맛과 함께 그 가치를 결정짓는 중요한 물성으로서 우리나라 황 금배 재배환경과 특성에 알맞은 배봉지의 제작이 선결될 때, 배 품질의 향상, 안정된 공급이 가능하게 될 것이며 아울러 농가의 수업증대와 수출 경쟁력 강화가 이루어질 수 있을 것으로 판단된다. 이러한 측면에서 황금배 재배농가가 당면한 동녹발생의 문제점을 신속한 해결 을 위한 새로운 기능성 국산 황금배 봉지의 개발이 절실히 요구되고 있다. 위와 같은 문제를 해결하기 위하여 본 연구에서는 과실봉지의 종류간에 동녹발생 정도 가 상이한 점에 예의 주시하여 다양한 봉지의 적용실험을 통해 다음과 같은 결과를 얻었다. 황금배의 동녹 발생 정도는 배봉지의 발수성과 투기 및 투습도에 의해 크게 영향받는다. 상기한 바와 같이 과점의 코르크화로 인해 동녹이 발생된다고 할 때, 봉지 내의 습기 및 웅결수의 양은 황금배의 동녹에 중대한 영향을 미친다. 태양광이 내려찍는 낮 시간동안 황 금배는 증산작용을 하며 습기를 배출하는데 봉지 내의 온도가 높은 낮 시간 동안 수분이 습기로 존재하지만 기온이 급격히 떨어지는 일몰 이후에는 상대습도가 높아짐에 따라 결로 현상으로 인해 응결수가 된다. 이때 응결수와 접촉한 과피는 건조한 상태보다 세균의 침입 이 용이할 뿐만 아니라 기공(과점)의 호홉에 지장이 초래됨에 따라 과점의 할렬이 더욱 조 장되어 코르크화를 유발하고 결과적으로 동녹이 발생한다고 판단된다. 따라서 만일에 봉지 의 투기, 투습도가 양호하여 봉지 내의 과다한 수분이 충분히 배출될 수 있었다면, 수분의 응결을 피하고 동녹을 완화시킬 수 있을 것이라 판단되었다.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.224-239
• /
• 2016

This article aims to review the major problems of the present Korean management system of archaeology and to seek desirable suggestions in order to pursue the sustainable harmony between the recovery of academic excavations and economic development. In order to continue the sustainable harmony between preserving the values of archaeological resources as limited pure public goods and economic development, the present system of developer's payment for archaeology must be replaced by the introduction of the development fee for archaeology. The excavation of archaeological resources have been done according to the market principle, that is, the lower price principle. But the principle has produced a lot of serious problems in the Korean management system of archaeology, which must result in the market failure. So the governmental intervention is urgently required. By introducing the development fee, the archaeological field units and the developers can avoid direct contact. Instead, the Heritage Management Office will operate the excavation fund raised by the development fee for archaeology in order to avoid low-price contracts, degrading excavation quality, and other related residents' complaints and social conflicts in advance. In addition, the budget for purchasing the preserved excavation sites, which are the source of the landowners' enormous complaints, must be allocated to the Heritage Management Office by the Ministry of Planning and Finance. More budget for small-sized excavations must be allocated as well in order to solve many residents' complaints. These budget increase will be the fundamentals to decrease the residents' big complaints and social conflicts in relation with the archaeological management, which will be a challenge of the Korean government. Along with the governmental efforts, the archaeological field units must do their all-out efforts to overcome many problems in excavation including low-price contracts. Finally, the wage system and working status system must be revised. Excellent young excavators must be recruited appropriately and continue to work in a safe psychological condition, which are the basis to guarantee high-quality excavation.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.82-100
• /
• 2022

With the crisis of the COVID-19 pandemic and the era of the 4th industrial revolution, archaeological heritage education has entered a new phase. This article responds to the trends in the post-COVID-19 era, seeking ways to develop archaeological heritage education and sustainable strategies necessary in the era of the 4th industrial revolution. The program of archaeological heritage education required in the era of the 4th industrial revolution must cultivate creative talent, solve problems, and improve self-efficacy. It should also draw attention to archaeological heritage maker education. Such maker education should be delivered based on constructivism and be designed by setting specific learning goals in consideration of various age-specific characteristics. Moreover, various ICT-based contents applying VR, AR, cloud, and drone imaging technologies should be developed and expanded, and, above all, ontact digital education(real-time virtual learning) should seek ways to revitalize communities capable of interactive communication in non-face-to-face situations. The development of such ancient heritage content needs to add AI functions that consider learners' interests, learning abilities, and learning purposes while producing various convergent contents from the standpoint of "cultural collage." Online archaeological heritage content education should be delivered following prior learning or with supplementary learning in consideration of motivation or field learning to access the real thing in the future. Ultimately, archaeological ontact education will be delivered using cutting-edge technologies that reflect the current trends. In conjunction with this, continuous efforts are needed for constructive learning that enables discovery and question-exploration.

• The Korean Society of Law and Medicine
• /
• v.23 no.3
• /
• pp.3-44
• /
• 2022

As a result of a close review focusing on the case of obstruction of epidemiological investigation by a religious group A in Daegu, which was a problem when the pandemic of Covid-19 infection began in Korea around February 2, 2020, when an epidemiological investigator requested a specific group to submit a list, While there have been cases where an act of not responding or submitting an edited omission list was sentenced to the effect that the act did not fall under an epidemiological investigation, in the case of non-submission of the visitor list for the B Center, even though a 'list of visitors' was requested. Regarding the fact of refusal without a justifiable reason, 'providing a list of persons entering the building is a key factual act that forms a link between epidemiological investigations accompanying an epidemiological investigation, and refusing to do so is also an act of refusal and obstruction of an epidemiological investigation. There are cases where it is possible to demand criminal punishment. Regardless of whether the request for submission of the membership list falls under the epidemiological investigation, there are cases in which the someones' actions correspond to the refusal or obstruction of the epidemiological investigation. A lower court ruling that if an epidemiological investigation is rejected or obstructed as a result of interfering with factual acts accompanying an epidemiological investigation, comprehensively considering whether or not the list has been diverted for purposes other than epidemiological investigation, the logic is persuasive. Epidemiological investigations such as surveys and human specimen collection and testing are conducted for each infectious disease patient or contact confirmed as a result of the epidemiological investigation, but epidemiological investigations conducted on individual individuals cannot exist independently of each other, and the This is because the process of identification and tracking is essential to an epidemiological investigation, and if someone intentionally interferes with or rejects the process of confirming this link, it will result in direct, realistic, and widespread interference with the epidemiological investigation. In this article, ① there are differences between an epidemiological investigation and a request for information provision under the Infectious Disease Control and Prevention Act, but there are areas that fall under the epidemiological investigation even in the case of a request for information, ② Considering the medical characteristics of COVID-19 and the continuity of the epidemiological investigation, the epidemiological investigator the fact that the act of requesting a list may fall under the epidemiological investigation, ③ that the offense of obstructing the epidemiological investigation in certain cases may constitute 'obstruction of Performance of Official Duties by Fraudulent Means', and ④ rejecting the request for information provision under the Infectious Disease Control and Prevention Act from September 29, 2020 In this case, it is intended to be helpful in the application of the Infectious Disease control and Prevention Act and the practical operation of epidemiological investigations in the future by pointing out the fact that a new punishment regulation of imprisonment or fine is being implemented.

• Journal of Popular Narrative
• /
• v.26 no.2
• /
• pp.251-276
• /
• 2020

The purpose of this article is to critically read Globalizing Borderlands Studies in Europe and North America to examine trends in border studies conducted so far in Europe and North America and to discuss the expandability and limitations of the narrative. It introduces a variety of case studies covering the borderlands of Europe and North America from ancient to modern times. It consists of a total of 10 chapters, in addition to the introduction chapter to clarify the purpose and definition of the collaboration and the short conclusion chapter on the prospects for the future of borderlands studies. This volume has some important implications for current borderland research in two main respects. First, it can introduce us we the areas and targets that the leading researchers from European and North American academia (usually the United States') have paid attention to. It also examines the current status of borderland research and predicts whether it will be possible to study various border areas where exist in other regions (especially in Asia) based on accumulating academic achievements, as well as the possibility of expansion of so-called 'globalization'. Second, it introduces the borderland as a conceptual space, beyond the border area as a physical space that is commonly thought of when it comes to 'border'. Cases of "conceptual borderlands" can be applied to a number of topics ranging from an individual's identities to the methods of governance, religions, economies, social institutions, families, labor issues, public health services and gender issues. There are, however, also some questions to be noted in the volume: the lack of consistent use of terminology, which can be considered general problems of collaboration studies; the fact that the authors still tend to understand borderlands within the imperialist discourse, perhaps because of their academic background is situated mainly in Europe and North America; the borderlands cases described here as the areas of conflict and struggle only. Nevertheless, the book is of significance in that it suggests a possibility of various borderlands studies and helps us to have better understanding of the current geopolitical situation imposed on the Korean Peninsula, which is located on the borderland between the continental and maritime powers.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.371-388
• /
• 2023

A stratum with a complex composition and a distributed low-permeability soil layer is difficult to remediate quickly because the soil remediation does not proceed easily. For efficient purification, the permeability should be improved and the soil remediation agent (H₂O₂) should be injected into the contaminated section to make sufficient contact with the TPH (Total petroleum hydrocarbons). This study analyzed a method for crack formation and effective delivery of the soil remediation agent based on pneumatic fracturing, plasma blasting, and vacuum suction (the PPV method) and compared its improvement effect relative to chemical oxidation. A demonstration test confirmed the effective delivery of the soil remediation agent to a site contaminated with TPH. The injection amount and injection time were monitored to calculate the delivery characteristics and the range of influence, and electrical resistivity surveying qualitatively confirmed changes in the underground environment. Permeability tests also evaluated and compared the permeability changes for each method. The amount of soil remediation agent injected was increased by about 4.74 to 7.48 times in the experimental group (PPV method) compared with the control group (chemical oxidation); the PPV method allowed injection rates per unit time (L/min) about 5.00 to 7.54 times quicker than the control method. Electrical resistivity measurements assessed that in the PPV method, the diffusion of H₂O₂2 and other fluids to the surface soil layer reduced the low resistivity change ratio: the horizontal change ratio between the injection well and the extraction well decreased the resistivity by about 1.12 to 2.38 times. Quantitative evaluation of hydraulic conductivity at the end of the test found that the control group had 21.1% of the original hydraulic conductivity and the experimental group retained 81.3% of the initial value, close to the initial permeability coefficient. Calculated radii of influence based on the survey results showed that the results of the PPV method were improved by 220% on average compared with those of the control group.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.247-258
• /
• 2023

This study aims to investigate the enhancement of water resistance and improvement in adhesion to the skin by combining dextrin palmitate and isopropyl titanium triisostearate coating materials with titanium dioxide. Due to the recent increase in consumers who enjoy outdoor activities, the demand for sunscreen with excellent water resistance is increasing. Prior research was conducted with O/W, Pickering, and W/O/W multiple formulations, but there was a limit to water resistance. The purpose of this study is to develop a complex inorganic powder that can improve water resistance and increase adhesion to the skin to solve this problem. First, we combined dextrin palmitate and isopropyl titanium triisostearate coating materials to form a composite with titanium dioxide. The coating of the inorganic powder was confirmed using FE-SEM and FT-IR analysis. The composite exhibited significantly higher in vitro water resistance compared to other formulations. The hydrophobicity of the coated inorganic powder was compared by measuring the contact angles. When the coated inorganic powder was applied to the W/O sunscreen formulation and the non-coated inorganic powder was applied to the W/O sunscreen formulation as a control, the SPF of the sunscreen containing the coated inorganic powder was higher. These results were the same when observed with a UV camera. Finally the adhesion of the coated inorganic powder to the skin was assessed by applying it to a foundation product. In vivo study, it was observed that the product formulated with the coated powder exhibited less smudging compared to the foundation product formulated with the non-coated powder. The developed inorganic powder in this study demonstrated excellent adhesion to the skin, providing a superior sensory experience, as well as enhanced hydrophobicity and remarkable water resistance effects. In the future, the result of this study is expected to help develop various sunscreen products to improve water resistance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.17-32
• /
• 2023

The entrepreneurial activities of college students play a significant role in modern economic and social development, particularly as a solution to the changing economic landscape and youth unemployment issues. Introducing innovative ideas and technologies into the market through entrepreneurship can contribute to sustainable economic growth and social value. Additionally, the entrepreneurial intentions of college students are shaped by various factors, making it crucial to deeply understand and appropriately support these elements. To this end, this study systematically explores the importance and impact of role models through a multiple serial mediation analysis. Through a survey of 300 college students, the study analyzed how two psychological variables, growth mindset and entrepreneurial self-efficacy, mediate the influence of role models on entrepreneurial intentions. The presence and success stories of role models were found to enhance the growth mindset of college students, which in turn boosts their entrepreneurial self-efficacy and ultimately strengthens their entrepreneurial intentions. The analysis revealed that exposure to role models significantly influences the formation of a growth mindset among college students. This mindset fosters a positive attitude towards viewing challenges and failures in entrepreneurship as learning opportunities. Such a mindset further enhances entrepreneurial self-efficacy, thereby strengthening the intention to engage in entrepreneurial activities. This research offers insights by integrating various theories, such as mindset theory and social learning theory, to deeply understand the complex process of forming entrepreneurial intentions. Practically, this study provides important guidelines for the design and implementation of college entrepreneurship education. Utilizing role models can significantly enhance students' entrepreneurial intentions, and educational programs can strengthen students' growth mindset and entrepreneurial self-efficacy by sharing entrepreneurial experiences and knowledge through role models. In conclusion, this study provides a systematic and empirical analysis of the various factors and their complex interactions that impact the entrepreneurial intentions of college students. It confirms that psychological factors like growth mindset and entrepreneurial self-efficacy play a significant role in shaping entrepreneurial intentions, beyond mere information or technical education. This research emphasizes that these psychological factors should be comprehensively considered when developing and implementing policies and programs related to college entrepreneurship education.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.69-76
• /
• 2013

The incidence of globally infectious and pathogenic diseases such as H1N1 (swine flu) and Avian Influenza (AI) has recently increased. An infectious disease is a pathogen-caused disease, which can be passed from the infected person to the susceptible host. Pathogens of infectious diseases, which are bacillus, spirochaeta, rickettsia, virus, fungus, and parasite, etc., cause various symptoms such as respiratory disease, gastrointestinal disease, liver disease, and acute febrile illness. They can be spread through various means such as food, water, insect, breathing and contact with other persons. Recently, most countries around the world use a mathematical model to predict and prepare for the spread of infectious diseases. In a modern society, however, infectious diseases are spread in a fast and complicated manner because of rapid development of transportation (both ground and underground). Therefore, we do not have enough time to predict the fast spreading and complicated infectious diseases. Therefore, new system, which can prevent the spread of infectious diseases by predicting its pathway, needs to be developed. In this study, to solve this kind of problem, an integrated monitoring system, which can track and predict the pathway of infectious diseases for its realtime monitoring and control, is developed. This system is implemented based on the conventional mathematical model called by 'Susceptible-Infectious-Recovered (SIR) Model.' The proposed model has characteristics that both inter- and intra-city modes of transportation to express interpersonal contact (i.e., migration flow) are considered. They include the means of transportation such as bus, train, car and airplane. Also, modified real data according to the geographical characteristics of Korea are employed to reflect realistic circumstances of possible disease spreading in Korea. We can predict where and when vaccination needs to be performed by parameters control in this model. The simulation includes several assumptions and scenarios. Using the data of Statistics Korea, five major cities, which are assumed to have the most population migration have been chosen; Seoul, Incheon (Incheon International Airport), Gangneung, Pyeongchang and Wonju. It was assumed that the cities were connected in one network, and infectious disease was spread through denoted transportation methods only. In terms of traffic volume, daily traffic volume was obtained from Korean Statistical Information Service (KOSIS). In addition, the population of each city was acquired from Statistics Korea. Moreover, data on H1N1 (swine flu) were provided by Korea Centers for Disease Control and Prevention, and air transport statistics were obtained from Aeronautical Information Portal System. As mentioned above, daily traffic volume, population statistics, H1N1 (swine flu) and air transport statistics data have been adjusted in consideration of the current conditions in Korea and several realistic assumptions and scenarios. Three scenarios (occurrence of H1N1 in Incheon International Airport, not-vaccinated in all cities and vaccinated in Seoul and Pyeongchang respectively) were simulated, and the number of days taken for the number of the infected to reach its peak and proportion of Infectious (I) were compared. According to the simulation, the number of days was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days when vaccination was not considered. In terms of the proportion of I, Seoul was the highest while Pyeongchang was the lowest. When they were vaccinated in Seoul, the number of days taken for the number of the infected to reach at its peak was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days. In terms of the proportion of I, Gangneung was the highest while Pyeongchang was the lowest. When they were vaccinated in Pyeongchang, the number of days was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days. In terms of the proportion of I, Gangneung was the highest while Pyeongchang was the lowest. Based on the results above, it has been confirmed that H1N1, upon the first occurrence, is proportionally spread by the traffic volume in each city. Because the infection pathway is different by the traffic volume in each city, therefore, it is possible to come up with a preventive measurement against infectious disease by tracking and predicting its pathway through the analysis of traffic volume.