• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.287-298
• /
• 2020

The purpose of this study was to identify the current situation of safety accident received by Korea Consumer Agency and to provide a basis for preparing measures to prevent safety accident. This study was a descriptive study that secondary analyzes 4934 safety accidents accident information received from Korea Consumer Agency from 2013 to 2017. In this study, safety accident occurred more frequently woman, between 50-59 years old, the cause of safety accident were adverse effect after medical procedure(42.4%), the place where safety accident occurred private hospital(28.6%), integumentary system(41.3%) where safety accident occurred, symptoms of safety accident caused other organ damage and pain(13.1%) occurred most frequently and characteristics of safety accident differed depending on place of safety accident. Based on the results of this study, it is suggested to established a surveillance system that can prevent safety accident in which medical problems occur.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.493-499
• /
• 2013

This paper presents are experimental investigation to figure out impact pressure and flow characteristics of a wedge type structure in free fall. The flow field has been obtained by 2-frame grey level cross correlation PIV(Particle Image Velocimetry) method, the impact pressure of free fall structure by a pressure acquisition system apply to Dewetron system. The angles between a model and the free surface are adapted $15^{\circ}$, $25^{\circ}$, $35^{\circ}$ and $45^{\circ}$ respectively. Velocity field of water exit has higher better than water entry. The impact pressure under the bottom of the model has been appeared higher values at $15^{\circ}$ than $45^{\circ}$, and also at P1.

• Korean Journal of Plant Resources
• /
• v.27 no.2
• /
• pp.183-187
• /
• 2014

Hovenia dulcis var. koreana Nakai, the oriental raisin tree, has been considered not only fruit but an herbal medicine in East Asia including Korea, Japan and east China. As honey plant, value of this species had been rising steadily. The aim of this study was conducted to develop the propagation technique by scion collection time, scion age and vinyl house on survival rate of H. dulcis. The survival rate by veneer grafting showed no significant differences among 3 new cultivars. The scion collection at the northern temperature zone was observed to be the most appropriate time before the spring equinox when the plants are fully dormant. Especially, the installation of vinyl house showed 86% survival rate by veneer grafting. The scion age was effective 1 year shoot than 2 years shoot for increase the grafting survival rate. In this case, the installation of vinyl house can contribute above 80%.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.4
• /
• pp.333-345
• /
• 2021

Due to the improved living standards and the expectation on higher-quality housing of tenements, complaints on the defects in the buildings are increasing every year. Also, the types of flaws are changing. We surveyed one hundred buildings(9,748 households) in 12 complexes across the country to investigate the shifted types. The number of defects received increased by about 1.6 times compared to 10 years ago, while the categories did not change. The report on the malfunctioning mechanical equipment has increased 1.4 times than ten years ago, and the types of the problem changed. The proportion of general parts(water supplement, drainage, water pressure) has decreased about 25% compared to 10 years ago. This is because the items related to the indoor environment become standardized in apartment housing. Therefore the problems related to those have been increased. As the specialized items applied to the tenement building are showing gradual expansion, the defect reports concerning those will also grow.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.20 no.4
• /
• pp.51-65
• /
• 2009

This study attempted to investigate users' information needs in an educational research library, which delivers web-based digital reference services to library users, by analyzing reference questions asked by remote users. A total of 242 questions from two electronic bulletin boards was examined in terms of 6 types of questions asked and 23 subareas of education. The study found that 56.1% of reference questions on the library bulletin board were pure reference questions in curriculum, textbooks and teaching & instruction. Suggestions for effective use of digital reference services were made: easy access to menu services, use of web forms, development of digital reference systems providing search functions and response functions.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.399-405
• /
• 2020

Recently, it is difficult to produce uniform scions and rootstocks with high quality in a greenhouse due to weather extremes. The closed transplant production system is useful for producing scions and rootstocks with desirable morphological characteristics by environment control regardless of weather outside. In this study, we investigated transpiration rates and growth of cucumber and tomato scions and rootstocks grown under different light intensity conditions for precise irrigation control in a closed transplant production system. Hanging system to measure continuously the weight of plug tray consisting of seedlings and substrate with load-cell was installed in each growing bed. Using this system, we confirmed initial wilting point of cucumber and tomato seedlings, and conducted subirrigation when moisture content of substrate was not below 50%. The irrigation time of cucumber scions and rootstocks were 7 and 6 days after sowing, respectively. In tomato scions and rootstocks grown under PPF (photosynthetic photon flux) 300 μmol·m^-2·s^-1, the irrigation time were 5, 8, 11, and 13 days after sowing. Increasing light intensity increased transpiration rates and differences of transpiration rates by light intensity was higher in tomato seedlings. The growth of cucumber and tomato seedlings was promoted by increasing light intensity, especially, hypocotyl elongation and stem thickening was affected by light intensity. Cumulative transpiration rate of plug tray in cucumber and tomato seedlings was increased by increasing light intensity, and daily transpiration rate per seedling was regressed by 1st-order linear equation with high correlation coefficient. Estimation of transpiration rates by weighing continuously plug tray of vegetable seedlings can be useful to control more accurately irrigation schedule in a closed transplant production system.

• Research in Plant Disease
• /
• v.23 no.3
• /
• pp.228-233
• /
• 2017

Six commercial rootstock varieties were tested for resistance to bacterial wilt (Ralstonia solanacearum) by dipping the roots of seedlings in the bacterial suspension at seedling stage. 'Shincheonggang' and 'B-Blocking' ranked top and second in resistance to bacterial wilt, respectively. For disease index of the grafted plants, 'Dotaerang' grafted onto 'Shincheonggang' was the least, followed by 'Ultra', 'Fighting', 'B-Blocking', 'Special', and 'Connection' grafts. Thus, disease development on the grafted plants was correlated with resistance of rootstocks. The effect of rootstocks on horticultural characteristics including days to flower of scion was minimum or negligible. In correlation between horticultural characteristics of rootstocks and scions grafted thereon, statistically significant negative correlation was observed in days to flower and fruit height but no significant correlation was observed in yield per plant, fruit diameter and soluble solid content in the fruits. Thus, selection of resistant rootstock varieties that support the growth and yield of scion well is necessary for effective control of the disease and yield increase.

• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.232-236
• /
• 2001

Four air temperature levels of 23, 25, 27 and 29$^{\circ}C$, three humidity levels of 85, 90 and 95% R.H. at photosynthetic photon flux (PPF) of 50 $\mu$mol.m$^{-2}$ .s$^{-1}$ were provided to investigate the effect of vapor pressure deficit on the evapotranspiration rate (EVTR) and graft-taking of watermelon grafted seed-increase. Thus EVTR of grafted seedlings increased with increasing air temperature at high humidity of 95%R.H. At relatively low humidity of 85% R.H., grafted seedlings showed a high EVTR and some wilting of scions was observed at this condition. This result would be ascribed to the low supply of water to vascular bundles according to the insufficient joining of scions and rootstocks. Differences in EVTR between 90% R.H. and 95% R.H. were not observed. Grafted seedlings showed high graft-taking at high relative humidity. Relative humidity had highly influenced to the graft-taking as compared to the air temperature. Graft-taking increased with decreasing vapor pressure deficit. Graft-taking greater than 90% was found at vapor pressure deficit less than 0.4kPa which could be obtained at humidity higher than 90% R.H. Therefore it is required to control the humidity higher than 90% R.H. for suppressing EVTR of grafted seedlings and preventing some wilting of scoins and thus enhancing the graft-taking of grafted seedlings.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.10
• /
• pp.317-322
• /
• 2020

Due to the development of artificial intelligence, it is used as a disaster response support system in the field of disaster. Disasters can occur anywhere, anytime. In the event of a disaster, there are four types of reports: fire, rescue, emergency, and other call. Disaster response according to the 119 call also responds differently depending on the type and situation. In this paper, 1280 data set of 119 calls were tested with 3 classes of SVM, NB, k-NN, DT, SGD, and RF situation classification algorithms using a training data set. Classification performance showed the highest performance of 92% and minimum of 77%. In the future, it is necessary to secure an effective data set by disaster in various fields to study disaster response.

• Proceedings of the CALSEC Conference
• /
• 1999.11a
• /
• pp.529-534
• /
• 1999

전자상거래는 구매자와 판매자 모두에게 많은 이점을 제공할 수 있어 최근 이에 관한 연구들이 많이 진행되고 있다. 특히 중소제조업체의 경우, 전자상거래라는 경영환경의 변화는 새로운 기회로 다가오고 있어, 상대적으로 기술력이 취약한 중소제조업체의 전자상거래를 지원하기 위한 요소 기술들의 개발 필요성이 점차 부각되고 있다. 이에 본 연구에서는 중소 금형제조업체의 판매과정을 사이버 공간에서 수행할 수 있는 전자상거래 기술을 개발하였다. 일반적으로 변화하는 경영환경에서는 생산과 관련된 계획과 통제가 보다 더 신속하고 정확하게 이루어져야 한다. 즉 전자상거래 환경에서의 제조업체는 구매자가 요구한 제품의 생산과 납기일을 맞추어 줄 수 있는지의 여부를 실시간으로 응답할 수 있어야 한다. 나아가서 인터넷을 통해 접수된 주문들은 해당 제조업체의 생산능력을 초과할 수 있는데 이 때에는 접수된 주문들 중에서 자사의 이익을 극대화할 수 있는 주문집합을 선별하여 접수여부를 결정해야 한다. 이와 같이 전자상거래 환경하에서의 제조업체는 생산과 관련된 정보를 신속하게 전달 받아 주문접수여부에 관한 의사결정을 올바르게 수행하는 것이 중요한데 본 연구에서는 중소 금형제조업체의 일정계획 및 주문처리를 위한 일정계획 기반의 선정 에이전트의 구조와 방법론을 제시하였다. 지금까지 일정계획에 관한 연구들은 대부분 납기일의 만족과 비용의 최소화 측면을 위주로 다루었다. 그러나 본 연구에서의 문제는 비용의 최소화보다는 납기일을 준수하면서 가장 많은 이익을 가져다 줄 수 있는 최적주문집합을 선정하는 문제를 다루고있다.자료를 수집하고, 통계분석 패키지를 이용하여 자료를 분석하였다. 방식을 결합한 하이브리드 형태이다.인터넷으로 주문처리하고, 신속 안전한 배달을 기대한다. 더불어 고객은 현재 자신의 물건이 배달되는 경로를 알고싶어 한다. 웹을 통해 물건을 주문한 고객이 자신이 물건의 배달 상황을 웹에서 모니터링 한다면 기업은 고객으로 공간적인 제약으로 인한 불신을 불식시키는 신뢰감을 주게 된다. 이러한 고객서비스 향상과 물류비용 절감은 사이버 쇼핑몰이 전국 어디서나 우리의 안방에서 자연스럽게 점할 수 있는 상황을 만들 것이다.SP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and b