• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.17-26
• /
• 2005

Both numerical analysis and cold tests for the swirl coaxial type injector were performed to obtain the influence of spray angle, velocity ratio and liquid film thickness for pressure drop and recess. The basic experimental and numerical data obtained in this study can be applicable to the performance design of swirl coaxial type injector. Spray angle was not affected by the applied test pressure drop, but spray angle was affected by tangential velocity ratio and shape factors. Feasibility of numerical analysis for the liquid film thickness and spray angle was confirmed, and the change of liquid film thickness by tangential velocity ratio affected more seriously than pressure drop, and liquid film thickness was decreased with increasing tangential velocity ratio.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.806-815
• /
• 2010

Gear trains are combined with the planetary gear units and helical gear units. It is known that the combination type is decisive to the system performances of the transmissions. In this paper, within the commonly used range of the design requirements for medium and large scaled (1~8 MW) wind turbines, the transmission characteristics of the typical layouts of the gear train are investigated. According to the international standard by ANSI/AGMA/AWEA 6006-A03, the gear boxes are basically designed and compared with respect to the system lifes of 99% reliability, total weight, the power densities, overall diameter/length and the maximum stresses of the gear teeth. With these comparison works, the characteristics of the layouts of gear trains are discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.7-18
• /
• 1991

목재(木材)의 액체침투성(液體浸透性)을 연구(硏究)하기 위하여 국내(國內)에 있는 침엽수재(針葉樹材)와 활엽수재(闊葉樹材)의 주요수종(主要樹種)을 대상으로 축방향(軸方向), 방사방향(放射方向), 접선방향(接線方向)의 침투(浸透)를 각각 조사(調査)하였다. 또한 방사(放射) 및 접선방향(接線方向)의 주요(主要) 침투경로(浸透經路)를 광학현미경(光學顯微鏡)으로 관찰(觀察)하였다. 실험결과(實驗結果)는 다음과 같다. 1. 종침투(縱浸透)는 침(針) 활엽수재(闊葉樹材)모두 1% $NH_4OH$ 처리(處理)시 침투성(浸透性)이 가장 컸으며 수종(樹種)에 따른 침투성(浸透性)의 차이(差異)는 침엽수재(針葉樹材)인 잣나무가 활엽수재(闊葉樹材)인 물푸레나무와 현사시나무 보다는 더 컸으며 관엽수재내(關葉樹材內)에서는 물푸레나무가 현사시나무보다 침투성(浸透性)이 더 큰 것으로 나타났다. 2. 횡침투(橫浸透)는 침엽수재(針葉樹材)에 있어서 침투면별(浸透面別) 침투량(浸透量)은 접선단면(接線斷面)이 방사단면(放射斷面)보다 훨씬 컸으며, 활엽수재(闊葉樹材)의 경우는 환공재(環孔材)에서는 접선단면(接線斷面)이 방사단면(放射斷面)보다 침투량(浸透量)이 컸으나, 산공재(散孔材)에서는 수종간(樹種間)의 변이(變異)가 컸다. 활엽수재(闊葉樹材)의 환공재(環孔材) 모두 방사조직(放射組織)이 횡침투(橫浸透)에 미치는 영향(影響)은 침엽수재(針葉樹材)만큼 크지 않았다. 침투(浸透)깊이도 침엽수재(針葉樹材)가 활엽수재(闊葉樹材)보다 컸으며, 활엽수재(闊葉樹材)는 수종간(樹種間)의 차이(差異)가 심했다. 3. 침투경로(浸透經路)를 보면 침엽수재(針葉樹材)는 방사유세포(放射柔細胞), 만재부(晩材部)의 소가도관(小假導管)이 주도적(主導的)인 역할을 하였으며, 활엽수재(闊葉葉材)도 역시 방사조직(放射組織)을 통해서 침투(浸透)가 이루어지지만 수종간(樹種間)에 방사조직(放射組織)의 침투양식(浸透樣式)과 침투속도(浸透速度)가 달랐다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1033-1036
• /
• 2002

본 연구에서는 Newton 기법과 모멘트에 기초를 둔 fixed point 알고리즘의 신경망 기반 독립성분분석기법을 제안하였다. 여기서 Newton 기법은 함수의 접선에 기초를 둔 해를 구하는 방법으로 역혼합행렬의 빠른 경신을 위함이고, 모멘트는 접선을 구하는 과정에서 함수의 기울기변화 계산으로 발생하는 발진을 줄여 좀 더 빠른 학습을 위함이다. 제안된 기법을 $256{\times}256$ 픽셀(pixel)의 12개 지문영상으로부터 임의의 혼합행렬에 따라 발생되는 영상들을 각각 대상으로 시뮬레이션 한 결과, 기존의 Fixed point 알고리즘에 의한 결과보다 우수한 분리성능과 빠른 학습속도가 있음을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.20-27
• /
• 2017

The aim of this paper is to present the modulus of elasticity of $E_L$, $E_R$, $E_T$ along three principal axis of softwood dimension lumber by nondestructive method. Ultrasonic measurement was carried out on defect free wood samples taken by the Japanese Larch, SPF (spruce-pine-fir) and Hem-fir $2{\times}4s$. The ultrasound velocities were measured to calculate young's moduli and it was derived elastic constants for each wood samples using the ultrasound velocities and densities of wood. From the test, $E_L$ was much greater than $E_R$ and $E_T$. $E_R/E_T$ ratios were about 1.3. The high density wood had high young's moduli in three principal axis and the difference in young's moduli between species was greater in transverse direction than longitudinal direction. The anisotropy of the lumber was presented through the calculated elastic moduli and compliances matrix in diagonal term were determined by inverting the stiffness matrix.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.655-662
• /
• 1985

화염스트레치와 확산선호도가 예혼합화염에 미치는 영향을 몇가지 모델에 대해 현상적으로 고 찰하였다. 즉, 정상상태의 구형화염, 구형으로 전파되는 화염, 균일유동장내의 곡면화염, 일차원 평면화염, 그리고 확대유동장내에서 스트레치된 평면화염등을 고찰하였으며, 이 해석의 결과는 화염면의 면적 변화율로 정의된 화염스트레치의 제인자들 즉, 비균일 접선속도장과 전파화염의 곡률에 의한 영향들이 공통적 특성을 나타냄을 보여주고 있다. 화염스트레치와 확산선호도가 화염전파속도에 미치는 복합효과는 세가지로 나타나는데 이는 화염온도의 변화에 따른 화학반 응강도의 변동, 열 및 물질확산의 강도차이, 그리고 대류 및 확산전달의 방향의 상이함에 기인 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.6-7
• /
• 2002

동축형 인젝터는 이미 여러 발사체에서 널리 쓰이고 있는 인젝터의 한 형태로서 또 다른 인젝터 방식인 충돌형과 비교하여 구조가 복잡한 단점이 있는 반면에 연소 현상의 불안정성에 대해 덜 민감하며 미립화와 혼합의 특성도 우수하다. 이런 동축형 인젝터는 크게 스월 방식과 shear 방식으로 나누어진다. 이중에서 스월 인젝터는 산화제와 연료의 유입구에 접선 방향의 속도를 줌으로써 conical sheet 형태의 분무장을 형성하여 미립화와 혼합을 꾀하는 방식이다. 이와 같은 스월 인젝터에서 중요한 변수 중에 하나인 recess의 변화에 대해 분무 형상과 미립화 혼합특성까지 파악해보았다.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3215-3220
• /
• 2007

Gas-liquid separator has been designed for the sake of reducing expenses associated with production operations. To date, a number of gas-liquid separators have been installed and put to use for various applications. Despite the advantages of simple and compact configuration of separator with no moving part, its efficient operation is limited in terms of total pressure losses, separation performance and flow-induced noise and vibration, which are closely associated with the very complicated flow phenomena involved. In the present study, a gas-liquid centrifugal separator with a swirl vane is investigated for the purpose of water separation from compressed moisture air. The 3D Navier-Stokes equations are numerically solved using a fully implicit finite volume scheme. Based upon the obtained solutions, tangential velocities, centrifugal forces, vortices and total pressure losses are analyzed to find out the best design parameters. From the present study, several attempts are made to improve the performance of conventional separators of centrifugal type.

• School Mathematics
• /
• v.8 no.4
• /
• pp.417-439
• /
• 2006

Many studies indicate the emerging crisis of education of calculus even though the emphasis of calculus have been widely recognized. In our classrooms, the education of calculus also has been faced with its bounds. Most instructions of calculus is too much emphasis on the algebraic approach, thus students solve mathematical problems without truly understanding the underlying concept. The purpose of this study is to develop mathematization teaching and learning materials and methods in caculus based on the mathematization teaching and learning theories by Freudenthal and the variability principles of conceptual learning by Dienes, In order to this purpose, first, we analyzed the high school mathematics II textbook of 7th curriculum in Korea. Second, we developed mathematization teaching and learning materials and methods in highschool calculus. Consequently, the following conclusions have been drawn: we have reorganized and reconstructed the context problem in calculus based on concepts of tangent line and instantaneous rate of change.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.2
• /
• pp.97-107
• /
• 2017

This study is the second investigation on the steady flow characteristics of an SI engine with a semi-edge combustion chamber as a function of the port shape with varying evaluation positions. For this purpose, the planar velocity profiles were measured from 1.75B, 1.75 times of bore position apart from the bottom of head, to 6.00B positions using particle - image velocimetry. The flow patterns were examined with both a straight and a helical port. The velocity profiles, streamlines, and centers of swirl were almost the same at the same valve lift regardless of the measuring position, which is quite different from the case of the pent-roof combustion chamber. All the eccentricity values of the straight port were out of distortion criterion 0.15 through the lifts and the position. However, the values of the helical port exceeded the distortion criterion by up to 4 mm lift, but decreased rapidly above the 3.00B position and the 5 mm lift. There always existed a relative offset effect in the evaluation of the swirl coefficient using the PIV method due to the difference of the ideal impulse swirl meter velocity profile assumption, except for the cylinder-center-base estimation that was below 4 mm of the straight port. Finally, it was concluded that taking the center as an evaluation basis and the assumption about the axial velocity profile did not have any qualitative effect on swirl evaluation, but affected the value owing to the detailed profile.