• The korean journal of orthodontics
• /
• v.35 no.6 s.113
• /
• pp.459-474
• /
• 2005

Making a precise and ideal set-up model is an essential part in the indirect bonding procedure for lingual orthodontic treatment. To evaluate the accuracy of the making a set-up model, 22 adult patients who received lingual orthodontic treatment with 4 bicuspid extractions were selected, and 3 sets of dental models (before, set-up, and after treatment) were measured using the set-up model gauge, an instrument for measuring the inclination and angulation of the clinical crowns on the dental model. Two sets of lateral cephalograms (before and after) from each patient were also evaluated. The mean difference between the before treatment model and the set-up model was $-3.93{\pm}6.98^{\circ}$ for the inclination and $1.87{\pm}5.79^{\circ}$ for the angulation. And the mean difference between the set-up model and the after treatment model was $-4.31{\pm}5.91^{\circ}$ labiolingually and $-2.16{\pm}3.27^{\circ}$ mesiodistally, The after treatment model differed from the before treatment model about $-8.24{\pm}5.39^{\circ}$ in inclination. There were no significant difference between the measured gauge that measured from the dental model using the set-up model gauge and the calculated gauge angle measured from the lateral cephalogram using constructed points and lines. Using the set-up model gauge, it is possible to evaluate the study model 3-dimensionally in relation with the patient's lateral cephalogram and establish whether the doctor's prescription or overcorrection is built in the set-up model precisely.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.362-368
• /
• 2016

In the recent International Maritime Organization's (IMOs) Maritime Safety Committee's 93rd session, the International Chamber of Shipping and International Parcel Tankers Association addressed marine fuel oil quality problems: increasing diluents in marine fuel oil, ignition in engine rooms due to the low flash point of fuel oil, and marine fuel oils that can damage marine engines. To deal with these marine fuel oil quality problems, the International Maritime Organization secretariat appointed the worlds marine fuel oil monitoring institute and constituted a correspondence group to determine the fuel oil quality required by MARPOL Annex VI regulation 14.8 (sulfur content less than 0.5%). In this study, basic research that can help with responding to marine fuel quality issues and the IMO's work is conducted. In order to perform this basic research, the off-spec ratio related to the fuel oil quality standard (ISO 8217:2012), density distribution tendency, gross specific energy, and correlation between components in the fuel oil are analyzed through actual marine fuel oil (residual marine fuel) data from the Port of Singapore.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.240-248
• /
• 2016

The objective of this study was to determine the effect of exogenous abscisic acid (ABA) on the red coloration and endogenous ABA contents of apple fruit skins. ABA and fluridone (an ABA synthetic inhibitor, FD) was sprayed on 'Hongro' apple fruit skins at 107 days after full bloom (DAFB). Visual coloration and hunter's color values were not affected by the ABA and FD treatments. Anthocyanin contents in fruit skins increased similarly to hunter $a^*$ values of fruit skins, but ABA and FD did not affect its accumulations. Liquid chromatography analysis revealed that endogenous ABA contents in control fruit increased at first and then decreased from 12 hours after the treatment. ABA treatment increased ABA contents in fruit skins from 2 hour after the treatment and it lasted until the end of the treatments. FD decreased ABA contents in fruit skins from 6 hours after the treatment. ABA treatment increased MdNCED2 (an ABA biosynthetic gene), MdACO1 (an ethylene biosynthetic gene), and MdCHS and MdDFR expressions. However, MdUFGT expressions were not affected by ABA treatment.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.69-76
• /
• 2008

Three failure cases of CNG composite vessels were reported since after January 2005. The 1st and 2nd accidents were indebted to vessel defect and installation mistake. The 3rd was caused by gas leak at pipe connections. In this paper various aspects were studied based on information of the three failure analysis, which must be improved for better safety of the CNG bus system. Overpressure region caused by vessel explosion was theoretically predicted and also assessed by PHAST program. Explosion of 120 l vessel under 20 MPa is equivalent to 1.2 kg TNT explosion. The predicted value by PHAST was more serious than theoretical one. However, actual consequence of explosion was much less than both of the predicted consequences. Since the CNG vessel was designed by the performance based design methodology, it is difficult to verify whether the required process and tests were properly conducted or not after production. If material toughness is not enough, the vessel should be weak in brittle fracture at early in the morning of winter season since the metal temperature can be lower than the transition temperature. If autofrettage pressure is not correct, fatigue failure due to tensile stress during repeated charging is possible. One positive aspect is that fire did not ocurred after vessel failure. This may be indebted to fast diffusion of natural gas which hindered starting fire.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.22-26
• /
• 1986

This study was conducted to investigate weed population dynamic in orchard and to establish an appropriate application time for oxyfluorfen. 28 weed species including Persicaria hydropiper was observed to be problem weeds in orchard. P. hydropiper was on single dominant species which increased importance value of 13.7 on May 15 to 60.79 on August 10, followed by Calystegia hederacea, Alopecurus aequalis, Capsella bursa-pastoris, Roripa islandica, Echinochloa crus-galli, Potulaca olearcea, Elusin indica. Simpson's index increase from 0.11 on May 1 to 0.40 of August 10, indicating the dominance of specific weed species. The effective herbicide to control these weeds was oxyfluorfen at 5kg prod./ha applied at pereemergence treatment on March 25, showing more than 90% control for 120 days after application. Preemergence application of oxyfluorfen at 3kg prod./ha on March 25 followed by paraquat 3kg prod./ha applied on June 25 as the foliar application can maintain the clean orchard for a year, showing on of the promising and applicable control system. The most appropriate rate and time for oxyfluorfen seemed to be 5kg prod./ha applied on March 25.

• Korean Journal of Weed Science
• /
• v.16 no.4
• /
• pp.264-281
• /
• 1996

As a consequence of wide use of herbicides, Eleocharis kuroguwai Ohwi became a dorminant problem weed for rice cultivation in Korea. To understand the establishment of the weed, experiments on physio-ecological characteristics were carried out sprouting and occurrence, the results could be summarized as follows: Sprouting percentage remained 68 to 73% until the time of field emergence, indicating many of the them are still dormant. The proportion of the dormant tubers were greater for the smaller than the bigger tubers. Apical dominance was apparent in sprouting, with 84% of tuber sprouted from only one of the apical buds. Tubers sprouted from 2 or 3 buds were less than 20%, and were mostly from the bigger tubers. When the shoot growth was compared, by controlling the others, ones from apical and the next 3 buds showed similar vigorous growth, but the later ones showed poorer growth. For the longevity of tubers, deep soil storage appeared to be better than storage in temperature controlled room to 2~$3^{\circ}C$. Emergence of E. kuroguwai was better in clay soil than in sand, and the possible depth for emergence in clay soil appeared to be up to 21cm, but was 15cm in sand. When tubers were exposed to salt solutions before emergence tests, E. kuroguwai appeared to be much sensitive to salts than S.planiculmis. Among the tubers formed in previous year, 12.7% remained still viable until the end of next crop season, but with relatively strong dormancy. The first emergence was about 10 days after planting at ordinary cropping seasons, and the days to the maximum shoot number stage were 60~90 from planting. The duration was extended at early transplanting, and shoot number, leaves per shoot, and tubers developed per plant were also greater at early plantings. The 6th order offshoots were developing when E. kuroguwai was planted at early season. When planted at later seasons, generation and the number of offshoots was reduced planted at early season. When planted at later seasons, generation and the number of offshoots was reduced and the number of tubers, runner and rhizome lengths was also reduced.

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.202-209
• /
• 2015

In this study, we investigated the cumulative effect of low temperature on bud dormancy release and bud break characteristics in 'Campbell Early' grapevine (Vitis labruscana B.) cuttings grown in water culture. Additionally, we observed the development of buds while exposed to low temperatures in an attempt to improve our understanding of dormancy and bud break. The shoots were collected 120 days after full bloom (DAFB; leaf abscission period), and the accumulated chill unit (CU) value was calculated by reducing the temperature to $7.2^{\circ}C$ at 125 DAFB. The rate of bud break was 100% in shoots collected at 150 DAFB, The period until the first bud break was two times longer than in the shoots collected 165 DAFB, and bud break speed was significantly reduced. These results indicate that buds are released from endodormancy after 165 DAFB, because at this point the bud break was complete (bud break rate 100%) and it occurred in a very short time period. During this period, when the low-temperature accumulated value was 321h and 442CU according to the CH and Utah models, respectively. Furthermore, the survival rate of main buds decreased rapidly after 165 DAFB, and survival rate of accessory buds was maintained at more than 90% without seasonal differences. The rate of flower bud formation of main buds was much higher than in accessory buds (1:0.23) before the release from endodormancy at 150 DAFB. The final ratio of accessory buds to main buds was high, 1:1.54, at 255 DAFB. Correlation analysis of each investigated factor revealed that bud survival rate and bud formation rate were related only for the main buds, and there was a close relationship between the survival rate of main bud and time. In addition, the survival rate of main buds was positively correlated to the rate of flower bud formation.

• Korean journal of applied entomology
• /
• v.44 no.2
• /
• pp.115-123
• /
• 2005

Historical changes of population abundances of European red mite (ERM), Panonychus ulmi (Koch), and two-spotted spider mite (TSSM), Tetranychus urticae (Koch) (Acari: Tetranychidae), were described in selected apple orchards in the National Horticultural Research Institute (NHRI, Suwon, Korea), based on research reports of the NHRI from 1958 to 1998. ERM was an abundant species up to 1970, and TSSM became a dominant species after 1980. The change occurred around mid 1970. Three hypotheses were made to explain the change: TSSM competitively replaces ERM, ground cover weeds are a major influencing factor on movement of TSSM (TSSM movement into trees is accelerated by destroying weeds), and ERM and TSSM populations are regulated by natural enemy complexes when the orchard system is not disrupted. And long-term results of the interaction between two species were projected according to the combination of different orchard management strategies: pesticide sprays (non-selective toxic pesticide spray : heavy pesticide pressure (HPP), and selective soft pesticide spray = low pesticide pressure (LPP)) and weed control methods (grass planting, and clean culture system with herbicides). In the HPP and grass planting system, ERMs are abundant because ERM can avoid competition with TSSM as movement of TSSM to trees are restricted, and natural enemy complexes are destroyed by toxic pesticides. In the HPP and clean culture system, TSSMs are abundant because TSSM moves to trees from early season and competitively replaces ERM. In the LPP and grass planting system, ERMs are abundant because movement of TSSM to trees is reduced, but they do not build up a high population density since their densities are regulated by natural enemy complexes. In the LPP and clean culture system, TSSM moves to trees and competes with ERM, but the competition pressure is reduced because population densities of mites are regulated in a lower level by natural enemy complexes. So, ERM can occurs in late season. Thus, two species can coexist temporarily with more ERM in early season and more TSSM in late season. TSSM abundant phenomenon presented in this study can be partially explained as a result of long-term interaction between ERM and TSSM under the HPP and clean culture system.

• Korean Journal of Weed Science
• /
• v.12 no.2
• /
• pp.144-157
• /
• 1992

The study was conducted to compare the interprete methods and examine the feasibility of mixture use of oxyfluorfen and bensulfuron in controlling principal Paddy weeds, annuals and perennials. Application ratio of both chemicals were obtained from the combinations of 5 levels(0, 5, 10, 15, 20 g ai/ha) of each chemicals, respectively. All the treatments were applied at 5 days after transplanting and water was maintained at 3.0cm in depth. Shoot fresh-weight of weeds was assessed at 35 days after treatments. Data obtained was analysed by Colby, Isobole, Calculus, Regression and EQM method, respectively. The results from the analysis of variance on the principal weeds treated with oxyfluorfen and bensulfuron showed significant interactions at 1% level on both Echinochloa crus-galli and Eleocharis Kuroguwai, and total species at 0.5% level on both Potamogeton distinctus and Cyperus serotinus, but non significant on Scirpus juncoides and Sagittaria pygmaea. Thereafter, the results of the models applied to Echinochloa crus-galli, Eleocharis kuroguwai and total species were as follows ; 1. The Colby method gave values nearly identical to regression estimate method (both multiplicative models) as provided by Akobundu et al. The Colby method and Regression method indicated synergistic toward Echinochloa curs-galli, and total species, but antagonistic toward Eleocharis kuroguwai. 2. The Isobole method shows synergism on Echinochloa crus-galli at $ID_{50}$, and total species at $ID_{60}$ on Eleochari kuroguwai. 3. The Calculus method gave positive signs for the first differentiation and negative signs for the second differentiation except for some rates on Echinochloa crus-galli and total species, but reverse on Eleocharis kuroguwai. These result does not agree with the observed values. 4. ${\theta}$ value from the EQM method was greater than one at all combinations. This result was quite different from those of other methods. 5. The various models did not show the same results, but mixture of oxyfluorfen and bensulfuron tend to have synergistic effect. Weeding effect also was high. Treatment in terms of two chemical combination was expected to reduce rates, and to enhence weeding efficacy compared with single treatment.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.