• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.98-111
• /
• 1993

Two-dimensional nonlinear free-surface wave problems are analyzed with consideration of viscosity. Navier-Stokes equation and continuity equation are solved by the application of Finite Analytic Method, and MAC scheme is used far the treatment of free surface. Surface tension effect is also considered and laminar flow is assumed. The free-surface waves in shallow water, the flows around a vortex-pair with free surface and the wave ahead of a rectangular body are simulated to test the present numerical scheme. In the shallow water problem, viscous effect due to the friction on the bottom is observed. In the second problem, the approach of a vortex-pair to the free surface is simulated to examine the interaction of vortex-pair with the free surface. In the third problem, the wave ahead of a semi-infinite floating body is simulated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.1
• /
• pp.22-28
• /
• 2010

Approximate analysis for a building installed with a friction damper is performed to get insight of its dynamic behavior. Energy balance equation is used to have a closed analytical form solution of dynamic magnification factor(DMF). It is found out that DMF is dependent on friction force ratio and resonance frequency. Approximation of DMF and equivalent damping ratio of a friction damper is proposed with such assumption that the building with a friction damper shows harmonic steady-state response and narrow banded response behavior near resonance frequency. Linear transfer function from input external force to output building displacement is suggested from the simplified DMF equation. Root mean square of a building displacement is derived under earthquake-like random excitation. Finally, design procedure of a friction damper is proposed by finding friction force corresponding to target control ratio. Numerical analysis is carried out to verify the proposed design procedure.

• Journal of the Korean Institute of Gas
• /
• v.12 no.4
• /
• pp.46-51
• /
• 2008

The damping of a shock absorption device composed of nonlinear disk spring stacks and rubber rings was investigated. Friction forces of rubber rings and hysteresis of disk springs were obtained experimentally. The hysteresis curves of several types of disk spring stacks were approximated, from which the energy dissipated was estimated. Based upon the friction force and the energy dissipated, 4 damping models were presented and shock responses of the damping models were investigated. The hysteresis of disk spring is more meaningful than the friction of the rubber ring for the damping. For practical use, equivalent viscous damping model for total energy dissipated per cycle was suggested.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.438-443
• /
• 2007

개수로 흐름에 대한 연구는 1700년대 중엽 Chezy에 의해 이론적인 기초를 다졌으며, 광범위하고 조직적인 관측연구는 Darcy(1803-1858)에 의해 약 150년 전에 폭 2m, 길이 600m에 이르는 수로에서 실험관측을 수행하고자 시도하였다. Darcy의 동료이자 후계자인 Bazin은 제한된 조건의 현장관측뿐 아니라 다양한 조건의 수로를 제작하여 실험관측을 수행하였으며 그의 실험자료는 Bazin 자신 뿐만 아니라 Manning이나 Ganguillet와 Kutter 등 여러 연구자들의 경험식 개발에도 이용되었다. Nikuradse(1933)의 균일조도 원형관수로 실험결과로부터 관로 흐름은 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯 종류의 흐름특성을 가지고 있음을 확인하였고 Bazin(1829-1917)과 varwick(1945)의 실험결과로부터 개수로 흐름에서도 관로 흐름과 마찬가지로 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯가지의 흐름특성이 존재함을 알 수 있다. 본 연구에서는 기존의 지수형 마찰계수 산정식에서 단순히 조고만의 함수였던 ${\alpha}$에 물의 기본적인 성질인 표면장력, 점성력, 밀도와 자연 하천의 경사, 수심, 수면, 폭, 조고의 영향을 고려한 수심에 관한 무차원수 $Y_h$, 수면 폭에 관한 무차원수 $Y_b$, 조고에 관한 무차원수 $Y_k$를 도입하였다. 따라서 개수로 흐름 해석에 있어서 기존의 마찰계수 산정치보다 여러 영향을 반영하여 정확한 값을 산정할 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.384-384
• /
• 2017

In this study, the numerical investigation of nonlinear flow in a porous medium was carried out. The applied numerical model is ANSYS CFX which is a three-dimensional fluid dynamic model, and the verification of this model was carried out by using the experimental data obtained from Mayer et al works(2011). The experimental and numerical results of velocity and Reynolds number-friction coefficient relationship show relatively a good agreement. Based on the experimental results, we analysed numerically the velocity and Reynolds number-friction coefficient relationship with the variation of permeability, dynamic viscosity and porosity and quantitatively the variation by applying the best curve fitting for each case.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.2
• /
• pp.29-37
• /
• 2017

As the behavior of the debris flow due to the torrential rains in mountain is affected by shear strength and rheological properties of the fine fraction in the ground, the evaluation of both properties is necessary to estimate the behavior of the debris flow. The objective of this study is to evaluate the shear strength and rheological properties using the direct shear apparatus. The direct shear tests are conducted for two kinds of fine-grained soil specimens, which are in dry state and liquid limit state. From the direct shear tests, shear strengths are measured according to the normal stresses applied on the specimens to evaluate the cohesion and internal friction angle. In addition, reversal shear tests are performed for the fine-grained soil specimens in liquid limit state according to the shear rate to evaluate the residual shear strength. The results of direct shear tests show that the specimen at the liquid limit state has lower internal friction angle and higher cohesion compared to the dry stated, and the residual friction angle and cohesion at the residual state are lower than those at the peak state. In the result of reversal shear test, the residual shear strength is directly proportional to the shear rate and viscosity is calculated as $73.60Pa{\cdot}s$. This study demonstrates that the direct shear apparatus can be effectively used for the evaluation of the shear strength and rheological properties of the fine-grained soils related with the debris flow.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.5
• /
• pp.459-467
• /
• 2012

In this work, the configuration of a haptic gripper featuring magnetorheological(MR) brakes is proposed and an optimal design of the MR brakes for the haptic griper is performed considering the required braking torque, the uncontrollable torque(zero-field friction torque) and mass of the brakes. Several configurations of MR brake is proposed such as disc-type, serpentine-type and hybrid-type. After the configurations of the MR brakes are proposed, braking torque of the brakes is analyzed based on Bingham rheological model of the MR fluid. The zero-field friction torque of the MR brakes is also analyzed. An optimization procedure based on finite element analysis integrated with an optimization toolbox is developed for the MR brakes. The purpose of the optimal design is to find optimal geometric dimensions of the MR brake structure that can produce the required braking torque and minimize the mass of the MR brakes. In addition, the uncontrollable torque of the MR brakes is constrained to be much smaller than the required braking torque. Based on the developed optimization procedure, optimal solution of the proposed MR brakes are achieved and the best MR brake is determined. The working performance of the optimized MR brake is then investigated.

• Journal of Korea Water Resources Association
• /
• v.51 no.11
• /
• pp.971-976
• /
• 2018

An accurate analysis of pipeline transient is important for proper management and operation of a water distribution systems. The computational accuracy and its cost are two distinct components for unsteady flow analysis model, which can be strength and weakness of three-dimensional model and one-dimensional model, respectively. In this study, we used two-dimensional unsteady flow model with Five-Region Turbulence model (FRTM) with the implementation of interaction between liquid and air Since FRTM has an empirical component to be determined, we explored the response feature of two-dimensional flow model. The relationship between friction behaviour and the variation of undetermined parameter was configured through the comparison between numerical simulations and experimental results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.1
• /
• pp.9-16
• /
• 2020

The objective of this study is to propose closed-form solutions to the free vibration response of single-degree-of-freedom (SDOF) systems, as part of fundamental research on dynamic systems with Coulomb friction. The motion of a dynamic system with Coulomb friction is described by a nonlinear differential equation, and, due to the variation in the sign of friction force term with the direction of motion, it is difficult to obtain the closed-form solution. To solve this problem, the nonlinear differential equation is directly computed by numerical integration, or an approximated solution is indirectly obtained using a linear differential equation wherein the damping effect due to Coulomb friction is replaced by an equivalent viscous damping term. However, these conventional methods do not provide a closed-form solution from a mathematical point of view. In this regard, closed-form solutions to the free vibration response of SDOF systems with Coulomb friction are derived herein by considering that the sign of the friction force term is reversed in each half-cycle of motion and by expanding it to the entire time history using the power series function. In addition, for a given initial condition, both the number of free vibration half-cycles and the response at the instant when free vibration motion stops are predicted under the condition that the motion of free vibration is stopped when the amplitude of the friction force is higher than that of the restoring force due to stiffness.

• Geotechnical Engineering
• /
• v.8 no.1
• /
• pp.41-58
• /
• 1992

In the present study, an analytical solution method is proposed for the seismic design of anchored sheet pile walls used in port. The proposed analytical method deals with the anchored sheet pile walls with free earth support in sands and c- U soils, including the effects of hydrodynamic pressures and a condition of steady seepage between the two water levels. Also, the effects of various parameters(differential in water levels, anchor position, wall friction angle, dredge line slope, cohesion, adhesion etc.) on embedment depth, anchor force, and maximum bending moment are analyzed using the proposed method. In addition, comparisons between different definitions of safety factor are made, and necessary considerations required in the design of anchored sheet pile walls are examined.