• Progress in Medical Physics
• /
• v.12 no.2
• /
• pp.113-124
• /
• 2001

For veterinary imaging diagnosis, we obtained MR images of the canine brain, spine, kidney and pelvis from 3T MRI system which was equipped with the world first 3T active shield magnet. Spin echo (SE) and fast Spin Echo (FSE) images were obtained from the canine brain, spine, kidney and pelvis of normal and sick dogs using a homemade birdcage and transverse electromagnetic (TEM) resonators operating in quadrature and tuned to 128 MHz. In addition, we employed a homemade saddle shaped RF coil. Typical common acquisition parameters were as follows: matrix=512$\times$512, field of view (FOV)=20cm, slice thickness=3 w, number of excitations (NEX)=1. For T1-weighted MR images, we used TR=500 ms, TE=10 or 17.4 ms. For T2-weighted MR images, we used TR=4000 ms, TE=108 ms. Signal to noise ratio (SNR) of 3T system was measured 2.7 times greater than that of prevalent 1.57 system. The high resolution images acquired in this study represent more than a 4-fold increase in in-plane resolution relative to conventional images obtained with a 20 cm field of view and a 5 mm slice thickness. MR images obtained from 3T system revealed numerous small venous structures throughout the image plane and provided reasonable delineation between gray and white matter The present results demonstrate that the MR images from 3T system could provide better diagnostic quality of resolution and sensitivity than those of 1.5T system. The elevated SNR observed in the 3T high field magnetic resonance imaging can be utilized to acquire images with a level of resolution approaching the microscopic structural level under in vivo conditions. These images represent a significant advance in our ability to examine small anatomical features with noninvasive imaging methods. Moreover, MRI technique could begin to apply for veterinary medicine in Korea.

• Applied Microscopy
• /
• v.33 no.2
• /
• pp.145-154
• /
• 2003

The present study was designed to demonstrate ionic zinc in the rat nasal mucosa by means of zinc selenium autometallography ($ZnSe^{AMG}$). Rats were given sodium selenide either intraperitoneally (i.p) or intranasally (i.n). Prior to the i.n. administration the rats were anesthetized with pentobarbital sodium (30 mg/kg, i.p.). A thin plastic tube coupled to a Hamilton syringe was then inserted into the right nostril and $10{\mu}l$ of the solution was instilled. For the i.p. administration non-anesthetized rats were given $100{\mu}l$ of the sodium selenide solution (10 mg/kg). Control rats were instilled with saline. After 2 hrs survival, the rats were anaesthetized and transcardially perfused with 3% glutaraldehyde. The olfactory area was removed and put into same fixative. The nose was then sectioned ($30{\mu}m$) horizontally, autometallography (AMG) was performed according to Danscher et al. (1997). After silver enhancement, fine AMG grains were scattered in the whole length of the olfactory epithelium containing olfactory receptor neurons, sustentacular and basal cells. However, much higher concentration of the AMG grains occupied near the surface and in the basal region of the olfactory epithelium. Both groups of i.p. and i.n. administration showed almost same level in the concentration of the AMG grains. In i.n. group, few AMG grains were also found in olfactory nerves of the lamina propria, suggesting zinc transport into the olfactory bulb via olfactory axons. At the electron microscopic level, the AMG grains were most entirely found in the supporting cells of the olfactory epithelium, and they were mostly localized in lysosome-like organelles. The i.n. group showed various signs of tissue damage of the olfactory mucosa, where dense concentration of AMG grains were localized at crystalloid structures. The present study demonstrated dense population of ionic zinc in the rat olfactory epithelium. zinc may play a role in the olfactory functioin and in the pathogenesis of the neurodegerative disorders affecting nose.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.325-332
• /
• 2020

In the safety diagnosis of fire-damaged concrete structures, it is difficult to evaluate the strength and changes in materials due to high temperatures with the existing durability analysis method. In particular, the compressive strength of specimen with different damage levels by thickness is used as a representative value for reducing the compressive strength of the structural member. In this study, a heating experiment was performed with only top face heating and fully heating conditions at 400℃ to 800℃. After heating, splitting tensile test and color analysis were performed to sliced specimens with a thickness of 20mm accompanied by the compressive test of a fully heated specimen. As a result of the experiment, the compressive strength reduction rate calculated from the splitting tensile strength of every sliced specimen appeared to be within 10% of the fully heated specimen on aver age, and the hue value analysis showed consistent color values were observed by red at 400℃-600℃ and gray at 700℃ or above. It follows that the techniques proposed in this study are reasonably assessable to estimate heated temperature and residual compressive strength and damage depth of concrete.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.29-34
• /
• 2009

The Chrysanthemum zawadskii complex is demarcated from other species by having the white and pink ligulate flowers. Its morphological characters are greatly diversified, so that various classification systems have been suggested. The character of leaf thickness has been mentioned as the characteristic for recognizing some of infra-specific taxa within this complex. In this study, we used longitudinal leaf sections to investigate the leaf thickness and cell number of leaf blades of 13 populations including those of the members of the C. zawadskii complex, as well as 4 populations of the related species of C. boreale and C. indicum. From the result, it was clear that the leaves were thicker in populations of C. boreale, C. indicum and C. zawadskii complex (diminishing in that order), and that the leaves were composed of about 9 cell layers in all populations. Within the C. zawadskii complex, leaf shape and thickness varied among the populations. It was very interesting that the taxa with restricted distribution, like C. zawadskii var. tenuisectum, C. zawadskii var. alpinum, C. zawadskii var. lucidum, and C. zawadskii subsp. coreanum had a thicker leaves than found among widely occurring taxa. From this, leaf thickness is supposed to be an adaptation to the unique habitat of each population.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.4
• /
• pp.358-365
• /
• 2006

To study simultaneous water and solute transport kinetics during soaking in concentrated solution, the influence of the concentration and molecular weight of the solute(polyethylene glycol(PEG) and NaCl) in the soaking solution and the temperature on the water loss and solute gain rates were observed by using a model vegetable tissue(potato). When potato slices$(4cm{\times}4cm{\times}0.1cm)$ soaked in 60% PEG solutions, the water loss rate of the early phase decreased with increasing of the molecular weight of PEG from 200 to 6,000, while the final water loss increased with increasing the molecular weight of PEG and it reached to 80%. The cell wall of potato tissue was permeable to NaCl and PEGs of which average molecular weight is smaller than 400 but it was not permeable to PEG 600 and larger molecules. PEG which has average molecular weight below 600 induced plasmolysis and those above 600 induced cytorrhysis. The water loss rate of potato sample soaked in smaller molecular weight PEG solution was faster than those soaked in higher molecular weight PEG solution before cytorrhysis happened. The water loss rate was reversed after cytorrhysis happened. The volume change of potato within the first 60 minutes was larger in low molecular PEG solution but the final ratio of decreasing volume was larger in high molecular PEG solutions. In PEG 200 solution, the potato tissue was slightly shrinked without shape change. However, in PEG 4,000 solution, volume of potato was reduced significantly and potato tissue was twisted.

• Korean Journal Plant Pathology
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1986

Negatively stained dip preparations from Euonymus showing vein clear symptoms revealed bacilliform particles. The particles tentatively referred to as the Euonymus vein clear virus(EVCV) have a relatively complex structure, measuring 230-280nm in length and 70-80nm in diameter. They have an envelope, 8-10nm thick, provided with evenly spaced beadlike projection about 5-6nm long. The inner tubular core which had no envelope showed helical structures, 200-220nm long, and 50-55nm in diameter. This inner tubular core is interpreted as the virus nucleocapsid. A striking association of virus particles with the nuclei of infected cells was apparent from sections which showed numberous virus particles at the nuclear periphery and in what appeared to be intranuclear virus particle inclusions. Careful examination of these apparent inclusions revealed the presence of the nuclear envelope surrounding them, in addition to cytoplasmic organelles within them. Such profiles were interpreted as having arisen when the sections passed through invaginations of the cytoplasm into the nucleus. In all the sections showing virus particles associated with the nucleus, large number of virus particles were found to be present in expanded areas between the two lamellae of the nuclear envelope. This location is suggested as a possible site of virus assembly. Serveal micrographs of particles found in this location suggested incorporation of the inner lamella of the nuclear envelope into the viral envelope. Various micrographs indicated a possible helical arrangement of certain components present in the virus core.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.103-112
• /
• 2009

The purpose of this study was to compare the effect of curing methods of adhesive resins and resin cements in the root canal. Crown portions of 32 single-rooted mandibular premolars were removed. Routine endodontic treatment was done, and 9 mm deep post spaces were prepared within root canals. No.3 FRC Postec posts (Ivoclar-Vivadent AG, Liechtensteih) were cemented in the post spaces by self-(SC) or light-curing (LC) using two dual-cured adhesives (Adper Scotchbond multi-purpose plus and Exite DSC )and resin cements (RelyX ARC and Variolink II). They were assigned to 4 groups (n=8): R-SC, R-LC, V-SC, V-LC group. After stored in distilled water for 24 hours, each root was transversally sectioned with 1.5 mm thick and made three slices. The specimens were subjected to push-out test in a universal testing machine (EZ Test, Shimadzu Co., Japan) with a crosshead speed of 1 mm/min. The data were analyzed with repeated ANOVA and one-way ANOVA. Also the interface of post-resin cement and resin cement-canal wall of each group was observed under FE-SEM. When fiber posts were cemented into the root canal using total-etch adhesives, the bond strength and adaptation between post and root canal dentin was affected by curing method. Self-cure of adhesives and resin cements showed higher bond strength and closer adaptation than light-cure of them.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.62-72
• /
• 2001

To elucidate the behaviors of alkali swelllng of woods. the dimensional change in cross section of cell elements of four major Korean woods during alkali swelling were examined by an optical microscory, an imaging analysis method and an X-ray diffrartion During alkali swelling, tracheid diameter of Larix kaempferi wood showed greater swelling property than that of Pinus koraiensis wood, and the cell wall swelled highly over 10% sodium hydroxide solution treatment. The radial diameter of vessel elements in earlywood shrunk, but it swelled slightly in tangential direction. When treated with 5% NaOH, the wall thickness of wood fiber increased about three times over the original one. The thickness of cell wall in all elements and the diameter of wood fiber and tracheid showed almost isotropic shrinkage. The diameter of cell elements during the mercerization process decreased, but cell wall thickness Increased. Crystal transformation of cellulose in wood was not occurred by alkali treatments. but relative crystallinity and crystallite width of the woods increased slightly. Consequently, it was demonstrated that the swelling properties of woods were dependant on wood species, cell elements and alkali concentration.

• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.13-18
• /
• 2004

Purpose : This study was to evaluate the influence of slice thickness of computed tomography (CT) and rapid protyping (RP) type on the accuracy of 3-dimensional medical model. Materials and Methods: Transaxial CT data of human dry skull were taken from multi-detector spiral CT. Slice thickness were 1, 2, 3 and 4 mm respectively. Three-dimensional image model reconstruction using 3-D visualization medical software (V-works /sup TM/ 3.0) and RP model fabrications were followed. 2-RP models were 3D printing (Z402, Z Corp., Burlington, USA) and Stereolithographic Apparatus model. Linear measurements of anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared according to slice thickness and RP model type. Results: There were relative error percentage in absolute value of 0.97, 1.98,3.83 between linear measurements of dry skull and image models of 1, 2, 3 mm slice thickness respectively. There was relative error percentage in absolute value of 0.79 between linear measurements of dry skull and SLA model. There was relative error difference in absolute value of 2.52 between linear measurements of dry skull and 3D printing model. Conclusion: These results indicated that 3-dimensional image model of thin slice thickness and stereolithographic RP model showed relative high accuracy.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.116-128
• /
• 1999

치근흡수 연구에서 치아재식을 위한 적당한 동물모델을 찾는일은 대단히 중요하다. 본 실험에서는 쥐 대구치의 발치 및 재식을 통해서 치근흡수가 발현되는 모양을 관찰했다. 모두 20마리의 쥐(30일생)에게 0.4% ${\beta}$-APN(aminoproprionitrile)가 포함된 분말용쥐사료를 5일간 먹인후 케타민 마취후 상악좌우측 제일대구치를 손상을 최소화하여 발치 하였다. 발거된 쥐치아는 0.02M Tris-HCl로 표면처리하여 부착치근막을 제거한후 파라핀팍스로 치근단을 밀폐 하여 재식하였다. 재식후 1, 2, 4, 6, 8 및 12일이 경과된 후 심장관혈을 통하여 쥐를 희생시킨후 3% glutaraldehyde가 포함된 EDTA에서 탈회한후 Epon 포매 하였다. 모든 시편은 유리칼을 사용하여 1미크론 두께로 절편한후 veronal acetate buffer에 녹인 1% toluidine blue로 염색하였다. 파치세포양 세포에 의한 치근흡수는 재식 5-7일후 처음 관찰되었다. 재식 12일후에는 치근 전체에 걸친 광범위한 치근흡수가 관찰되었다. 이상의 결과 ${\beta}$-APN을 포함한 쥐사료 식이요법은 쥐 상악제일대구치의 발치와 재식을 용이하게 하여 일정한 치근흡수를 발현시키는데 많은 도움이 된 것으로 판단되었다.