• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.4
• /
• pp.43-53
• /
• 2016

In this paper, monitoring method of tool fracture using motor current was proposed for turning process. In order to take more reliable current signal, cutting force signal was compared as reference signal because cutting force signal is reliable, and analysis of signal correlation between cutting force and motor current was performed. The static components of the cutting force and motor current signals were correlated very well for different cutting conditions, and it was proven to use the motor current as an proper sensor for monitoring of tool fracture. To understand the characteristics of motor current, various kinds of cutting experiment were performed including tool fracture experiments. As a result, a new method to detect tool fracture using motor current in turing was proposed, and a large number of fracture experiments were carried out to evaluate the reliability of the proposed method. Finally, it can be possible to detect the tool fracture reliably.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.64-68
• /
• 1995

미세드릴가공은 최근의 공업제품의 소형 경량화 추세로 인해 수요가 급증하고 있으나 가공시에 있어서 많은 난 점이 존재 하기 때문에 강도 높은 가공기와 숙련된 가공전문가를 필요로 한다. 본 연구에서는 미세드릴가공을 수행하기 위해 우선 절삭상태 검출방법으로써 실용적이고 가공상황에 간섭을 일으키지 않는 주축용 모터의 전류 값을 이용하며 제어기 설계를 위해 퍼지추론과 유전알고리즘 이론을 도입한다. 이러한 지능형 가공방법을 미세 드릴가공에 구현하기 위해서 오프라인으로 안정한 가공조건을 초기화한 다음 퍼지제어기를 이용하여 일정한 절삭력을 유지할 수 있도록 실시간으로 이송속도를 제어하며 가공상황 변동에 따른 적절한 퍼지규칙을 자기 동조하는 최적화 알고리즘을 제안한 후 실제가공을 통하여 미세드릴가공의 특성과 제어기의 성능을 평가한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.32-37
• /
• 1991

최근 컴퓨터 및 제어 기술의 도움으로 기계 가공 분야에 있어 자동화, 정밀화, 그리고 무인화가 급속히 추진되고 있다. 이어 따라 대형화되고 복잡해지는 공작기계의 구조 해석과 정밀가공의 필요에 의해 동절삭 과정에 대한 관심이 더 한층 높아지게 되었다.(중략)

• Laser Solutions
• /
• v.18 no.3
• /
• pp.9-13
• /
• 2015

The development of a reliable, high-power source of mind-IR laser light gives process develop important tool with unique characteristics that will significantly impact a diverse range of applications.

• The Optical Journal
• /
• s.98
• /
• pp.68-74
• /
• 2005

최근 실리콘 웨이퍼 등 취성 재료에 있어 표면 거칠기나 마이크로 크랙 등 표면 품질과 함께 형상 정밀도에 대한 요구가 높아지고 있다. 본 고에서는 경취 재료의 초정밀 가공으로서 광학 유리재를 대상으로 하여 다이아몬드 절삭에 의한 임계 절입 깊이를 실험적으로 조사한 결과와 메탈 본드 다이아몬드 지석을 이용한 초정밀 경면 절삭 기술에 대해 소개한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.21-27
• /
• 2005

Recently researches for high speed machining have been actively performed. Few analytical studies, however, have been published. In this paper, a model of cutting forces is analytically studied to predict cutting characteristics in end mill process, especially considering both feed rate and spindle speed. The developed cutting model is based on Oxley's machining theory, which predicts the cutting forces from input data of workpiece material properties, tool geometry and cutting conditions. Experimental verification has been performed to verify the predictive cutting force model using tool dynamometer. It has been found that the simulation results substantially agree with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.895-898
• /
• 1997

These days, most of new materials, which is in use widely as cutting process materials have a characteristic in common. That is hard cutting. So, it happens that hardness by cutting temperature. And hardness on cutting process has an effect on tool wear or life shortness of tools. To solve these problems hot-machining is proposed. When a material is heated, organization of material is soften. So cutting process becomes easy. When such a hot-machining method applies on drilling process and then heated material is processed, cutting force is less than usual drilling process cutting force. In this paper, when a material is heated, cutting force on drilling process is measured. It is decided that the best suitable temperature area. And it suggest that the better hot-machining condition as surface accuracy is measured.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.878-881
• /
• 2000

Recently high speed machining is being studied actively to reduce machining time and to improve machining precision. To perform efficient high speed machining, evaluation of high speed machinability must be studied preferentially and it can be identified by investigation of cutting force, tool wear and surface roughness. In this study. the cutting force and tool wear and surface roughness are investigated in case of various cutting conditions for hardened die steel.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.1
• /
• pp.84-89
• /
• 2013

Titanium used in industry has been widely applied for aerospace engine, structures and spacecraft exterior, etc. because the titanium is higher in strength compared to the steel and light in weight compared to the steel. This study is to investigate the effect of cutting depth and cutting time on the spindle speed and feed rate of vertical machining center as a parameter to find the rough cutting time and cutting depth in the medium speed cutting machining of the titanium alloy. It is found that the cutting machining heat are increased as the cutting depth, feed rate, cutting time and spindle speed are raised.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.3
• /
• pp.74-81
• /
• 2009

At present, industries and researchers are looking for ways to reduce the use of lubricants because of ecological and economical reasons. Therefore, metal cutting is to move toward dry cutting or semi-dry cutting. One of the technologies is known as MQL machining. This paper presents an investigation into MQL machining with the objective of evaluating cylindricity and cooling effect for the turning process of SM45C. To reach this goal, cylindrical-outer-diameter turning experiments are carried out according to cutting conditions with fluid, MQL and dry machining methods. A cutting force, tool-shank temperature and cylindricity of workpiece are measured and analyzed. The correlation between cutting conditions and cylindricity are evaluated according to cooling lubricant environments.