• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.139-149
• /
• 2001

The effects of the cutting conditions on the surface roughness of workpiece in turning were studied in this paper. The workpieces made of carbon steel SM20C and SM45C were tamed without the support of the tailstock center. Cutting conditions were changed in three or flour steps in each parameter and cutting fluid was used. The surface roughness results of tests were measured and the effects of the cutting conditions were analyzed by the method of analysis of variance. The summary of the experimental research is as follows. The main parameters were cutting speed, fred-rate, depth of cut, and the interactions between speed and fled-rate, speed and depth of cut, and fred and depth of cut. As cutting speed increased, surface roughness showed lower value. The surface roughnesses of feed-rate 0.102 mm/rev and 0.147 mm/rev were better than those of feed-rate 0.05 mm/rev and 0.2 mm/rev.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.85-91
• /
• 2015

Current world aircraft industry studies on the precision of the product are in active progress. Particularly in terms of improving the quality of processed products in terms of the surface roughness of the dimensional accuracy, fatigue strength, and corrosion resistance, which affect a lot of research on surface roughness, has been investigated. In this study of aluminum alloy, 7075 aircraft aluminum is used in a cutting CNC lathe machine for the cutting speed and feed rate according to the cutting experiments that were conducted. Additionally, the machine tool of the cooling method soluble cutting oil, insoluble cutting oil by cooling, and cooling the workpiece by cutting surface roughness will be investigated. Through the method and soluble cutting oil coolant cooled by the cutting speed increases, the value of surface roughness showed a regular result. Tool nose radius of 0.8 mm than 0.4 mm picture of when approximately 50 of the surface roughness values were less.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.83-91
• /
• 2006

At present, industry and researchers are looking for ways to reduce the use of lubricants because of ecological and economical reasons. Therefore, metal cutting is to move toward dry cutting or semi-dry cutting. One of the technologies is known as MQL(Minimum Quantity Lubrication) machining. This research presents an investigation into MQL machining with the objective of deriving the optimum cutting conditions for the turning process of SM4SC. To reach these goals several finish turning experiments were carried out, varying cutting speed, feed rate, oil quantity and so on, with MQL and flood coolant. The surface roughness and cutting force results of tests were measured and the effects of cutting conditions were analyzed by the method of Analysis of Variance(ANOVA). From the experimental results and ANOVA, this research proposed optimal cutting conditions to improve the machinability in MQL turning process.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.61-69
• /
• 1988

Recently the automization of wood manufacturing and the development of CNC machine tools becomes the center of interest. Cutting mechanism, tool wear and the roughness of machined surface have been studied. In the studies about wood for special uses, concrete data of cutting is desired. While Pinus densiflora is characterized that heartwood develops as age increases, Chunyang District has the characteristic of strength, red color, relatively regular chap and high heartwood - percentage. But there is no data about cutting this wood, Chunyang District. In this study face milling by sintered carbide tool was excuted to Chunyang District. Cutting force, Surface roughness and states were investigated with regard to cutting speed. Example results were as follows; 1) Mean cutting resistance against lateral component force and longitudinal component force decreased rapidly up to cutting speed of 155 m/min, and remains constant above this speed. 2) The surface roughness of cutting surface lowered as cutting speed increased, regardless of fiber formation. Radial rougness of fiber is larger than lineal surface roughness. 3) Increase in Cutting speed made machining mark restrained. Down-milling showed larger marks than up-milling.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.11-20
• /
• 1989

마이크로 일렉트로닉스(Microelectronics)를 중심으로 하는 산업혁명이 진행되고 있는 시점에서 전자, 광학 또는 신소재 부품에 대한 형상과 치수 또는 표면거칠기에 대한 정확도와 정밀도가 엄격하게 요구되고 있다. 예를 들어 경취 재료인 반도체의 웨이화( w-afer), 수정진동자 자기헷트, 비구면렌즈 또는 연질 금속의 레이저빔(Laser Beam) 프린터 용 포리곤 밀러(Polygon Mirror), 자기디스크, 복사기용 드럼(drum), 레저기기용 반사밀러 등 가공정밀도를 향상시키기 위해서는 과거의 가공기술을 대치할 수 있는 새로운 초정밀가공 기술의 도입이 활발하게 진행되고 있다. 경취성 재료의 초정밀가공은 지금까지는 랩핑(lappi- ng), 폴리싱(polishing)의 가공기술이 주체였으나, 최근의 엄격한 부품정밀도에 대응하기 위하여 전가공을 초정밀 연삭가공으로 평면도,표면거칠기, 가공변질층을 향상시키고 다듬질 가공은 폴리싱으로 하여 표면거칠기를 향상시켜야 하는 가공기술이 보급되고 있다. 일반연질 금속의 다듬질가공은 유리지립을 이용하는 랩핑이나 폴리싱으로 다듬질 가공을 진행하고 있었 으나 형상정도와 표면정밀도를 동시에 얻는다는 것이 어렵고 또 가공시간이 너무 길어서 매우 고가인 것이 되고 말았다. 그러나 유리에서 연질금속으로 재료를 전환시키고 저가격화, 양산 화의 요구, 정밀도 향상과 부품의 안정화 등등 여러 이유로서 다아아몬드(Diamond) 공구로 mirror surface 를 만드는 초정밀 경면연삭 가공기술(precision turning with diamond)의 발달 로 이제는 완전히 새로운 가공기술로 대치되고 말았다. 다이아몬드에 의한 초정밀절삭은 공구 끝이 매우 예리하고 마모가 매우 적은 단결정 다이아몬드를 이용하고 절삭가공 기계는 운동정도 를 피가공물에 정확히 전사 시키는 방법이며 따라서 가공기계는 고도의 운동정밀도가 요구되며 그외에 강성, 진동, 열변이, 제어면에서 엄격한 검도가 있어야 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2216-2225
• /
• 1992

In recent years, machining turns to flexible manufacturing. Industry in machining requires to increase machining productivity and to reduce costs. To adapt this trend it is necessary to optimize machining condition. Even though many researches in this are introduced various way to set the optimal condition, still there are not enough. Therefore this research was done to select the optimal cutting condition for industry, and to develope the computer program to select the optimal cutting condition automatically. Also, this program was applied to many companies, and compare costs per minute. The results of this research will contribute to increase machining productivity of various companies with the automatic selection of optimal cutting condition.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.641-647
• /
• 1998

The machinability properties of P/M 2011 AI alloys extruded rapidly solidified by rotating disc atomization were investigated in this study. The Pb-Bi particles were very uniformly and finely dispersed in the P/M 2011 AI alloys extruded rapidly solidified. According to the increase of cutting speed, the short discontinuous chips were produceed and continuous chips were formed from the lower feed values of O.lmm/rev. The surface roughness is depend on the feed values, not cutting depth and cutting speed. The short discontinuous chips were formed due to dispersed $AI_20_3$ particles and Pb- Bi inclusion.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.7-13
• /
• 2006

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.112-118
• /
• 1999

Aluminum alloy, which is advantageous to machining and injection, makes a great contribution to shortening in delivery time, infection cycle time and reducing expense. This study presents machining conditions for mild materials and describes the difference between theoretical and practical machined surface roughnesses affected by various machining conditions. Machining results have been evaluated and analyzed under varying machining conditions. Special properties of the mild materials have been presented by the quantitative analysis and the optimal machining condition has been proposed for the mild materials.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.114-118
• /
• 1996

Evaluation of cutting condition is one of the most important aspect to improve productivity and quality. In this study, the wear and cutting characteristics(cutting force, acoustic emission signal and surface roughness) of ceramic cutting tool for hardened die material(SKD11) were investigated by experiment. Flank wear on relief face of tool was occurred more dominant than crater wear on rake face. Experiments were performed under the various cutting condition.