• 한국생산제조학회지
• /
• 제5권3호
• /
• pp.15-21
• /
• 1996

This study is focused on the prediction of appropriate tool life by clarifying the correlation between progressive tool wear and AE(Acoustic Emission) signals, while cutting stainless steel by end mill on the machining center. The results of this study were that RMSAE tends to increase linearly along with the increase of the cutting speed, and it was more sensitive to depth of cut than to the variation of feed rate at the same cutting conditions, and RMSAE increases around 0.21mm flank wear hereby AE-HIT also increases. AE signals depend upon tool wear and fracture from the above results. Therefore, the AE signals can be utilized in order to monitor the tool condition.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.116-123
• /
• 2000

This paper presents an NC code post-processor that adjusts feedrates to keep the variation of metal removal rate along the tool paths minimum. Metal removal rate is estimated by virtually machining the part, whose surface model is built from a series of NC codes defined in operation plan, with cutting-tool-assembly models, whose geometry are defined in a machining database. The NC code post-processor modifies the feedrates by the adjustment rules, which are based on the machining knowledge for effective machining. This paper illustrates a procedure fur grouping machining conditions and we also show how to determine an adjustment rule for a machining-condition group. An example part was machined and it shows that the variation of cutting force was dramatically reduced after applying the NC code post-processor. The NC code post-processor is expected to increase productivity while maintaining the quality of the machined part.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.142-148
• /
• 2008

This study aims to find the optimal cutting conditions, which are obtained by grinding condition, and the grinding characteristics and condition of constant velocity joint were investigated with respect to wheel velocity, depth of cut, feed speed. Grinding machine has been widely used in manufacturing optical reflects of metal. Such as steel are easy to be machined because of their proper material. As a result I obtained the data of grinding conditions makes good surface roughness and the optimal condition of grinding and get the mesh condition. The purpose of this study is to find the optimum grinding wheel characteristics for cutting constant velocity joint.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.497-500
• /
• 2000

절삭 작업과정에서 발생하는 버는 공구와 피삭재가 만나는 상태에 따라 그 형상이 결정되어진다. 공구와 피삭재 사이의 각, 공구의 회전속도, 이송속도, 피삭재의 종류등은 이러한 버의 형상을 결정하는데 결정적인 역할을 하므로, 실험에 의해서 생성된 단계별 자료를 CAD 및 CAM 데이터와 연관시켜 효율적인 알고리즘을 만들고자 한다. 특별히 공장자동화에 따른 작업의 자동화뿐 아니라 관리 체계의 정립을 위하여 전문가 시스템의 도입 역시 시급히 요구되고 있는 실정이다. 여기서 CAD 데이터는 피삭재에 대한 특징 형상의 정보를 포함하고 있기 때문에 피삭재의 형상에 대한 정보를 얻을 수 있다. 인식된 형상에 대하여 Exit 버 형성시 접점과 Exit Angle을 계산하기 위해 도형의 방향인식이 필요하며, 이를 통해 공구와 피삭재와의 관계를 산출하여 Exit 버의 판별을 수행할 수 있다. 본 논문에서는 이러한 과정을 수행하는 프로그램을 개발한다.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.24-29
• /
• 2017

This paper provides an experimental analysis on the breakage of the coated tool using the face-milling cutter of the machining center due to changes in the cutting speed and the feed rate. The experimental studies were conducted using STS 304 materials and the damage to the tool was analyzed according to the change in machining time. The experiments confirmed that the cutting speed and feed rate affected the tool damage and the mechanical impact and thermal shock were determined to severely damage the tool. From the production engineering point of view, it has been experimentally investigated that the increased feed rate significantly influences the material removal rate more than the increased cutting speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.144-149
• /
• 1994

반도체 산업계에 있어서 IC 등을 주류로 하는 마이크로칩의 생산성 및 성능이 현저히 성장하여 많은 경제효과를 가져오고 있다. 이와함께 전자부품에 사용되어지는 취성재료의 종류 및 그양도 점점 증가하는 추세이다. 이러한 취성재료의 절단에는 초극박의 다이야몬드 브레이드가 널리 사용되어지고 있다. 실리콘웨이퍼와 같은 취성재료의 다이싱가공에서 문제가 되고있는것은 칩핑과 사행현상의 발생이다. 사행현상의 원인으로서는 브레이드축면의 비대칭성,절삭날의 둔화,숫돌축과 이송방향의 위치결정오차,후렌지 단면의 흔들림등을 들수 있다. 그러나, 사행의 발생영역과 사행이 계속되는 이유에 대해서는 전혀 검토되어진바 없는것이 현실이다. 본 연구에서는 다이싱가공시의 사행현상에 주목해서 사행현상의 발생영역을 명확하게 함과 동시에 AE 센서를 이용하여 인프로세서로 사행현상의 검출방법을 개발하는 것을 목적으로 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.74-79
• /
• 1996

The wear of partially coated pinion cutters under several cutting conditions was studied. In the realm of this experiment, chipping was a dominant tool wear mechanism and flank wear was much larger than crater wear. Under the condition of relatively low rotary feed and low radial feed rate, the wear due to chipping was concentrated at the nose part of pinion cutter. Increasing of rotary feed and radial feed rate alleviated the concentration of chipping at nose and prolonged tool life.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.118-126
• /
• 2000

In this study, geometrical similarity conditions for drills of various diameters are discussed. The effect of geometrical similarity on the chip shape and forces of different sized conventional drills has been experimentally confirmed. Drilling tests are carried out for SM45C by using the conventional HSS drills. The torque and thrust forces are measured and compared with those chip forms. Chip shape in drilling are affected by three factors being flow angle, side and up curl of the chip. It is found that the feedrate and drill diameter are more affected than cutting speed on the chip form and cutting forces. The similarity conditions gives easily to estimate the chip shape, the thrust and the torque for drills of different diameters.

• 동력기계공학회지
• /
• 제6권1호
• /
• pp.82-87
• /
• 2002

Not only ferrous but also non-ferrous materials such as aluminum, brass, plastic and woods need cutting operation in recent manufacturing industry. Over the past few years a considerable number of studies have been made on non-ferrous metal cutting. But more study is required to meet various engineering needs. The purpose of this paper is to preform an experiment on the influence of feed-rate adjustment and side rake angle in turning operations from non-ferrous metals. As a result, the surface roughness was reduced when a side-rake angle increases and feed-rate decreases in the case of the plastic, brass, aluminum, and paulownia. Therefore, this papers develop a new type bite that be used to adjust side-rake angle.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.61-68
• /
• 1998

The form accuracy of parts has become an important parameter. Therefore, dimensional tolerance and geometric tolerance are used in the design stage to satisfy required quality and functions of parts. But the informations on the machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them. The results are as follows, The effects of work speed and depth of cut on workpiece shape are negligible compared with the effect of traverse speed. There is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increased.