• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.509-512
• /
• 2003

Our country is serious difference of precipitation seasonally and about 66% of yearly mean rainfall is happening in concentration rainfall form between September on June. It requires consideration because of a lot of natural disasters by this downpour are produced. Slope failure is happened by artificial factor of creation of slope according to the land development, fill slope etc. and natural factor of rainfall, topography, nature of soil, soil quality, rock floor. Usually, Direct factor of failure slope is downpour. In this study, the Slope about among 55 places happened failure by downpour investigated occurrence position, geological etc and executed and inquire into character of rainfall connected with failure slope. Among character of rainfall, executed analysis about Max. hourly rainfall and cumulative rainfall of place that failure slope is situated and grasped the geological character of failure slope. Through this, inquire to character of failure slope by rainfall and take advantage of basis study for Hazard map creation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.535-542
• /
• 2000

The investigated cut-slope is located in Odong-Ri, Hoebuk-Myun, Boeun-Gun and composed of quartzite and phyllitic rocks (approximately 80 meters in length and 25 meters in height). During the investigation, the groundwater which was inferred to the natural pipe of slope was continuously flowing in the upper part of slope. The investigation for discontinuity properties in this area was carried out to decide the rock mass rating and strength parameters. To analyze the stability of cut-slope, lower equal-area hemisphere projection method was used. And laboratory test was done to evaluate engineering properties of soil which was sampled in the non-failure and failure area The inferred causes of cut-slope failure are the geometric relationship between the orientation of cut-slope and geological structures such as joints, faults which is distributed in the slope. And direct cause of failure is the increase of water content due to the heavy rainfall.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.117-122
• /
• 2003

Every year in domestic slope failure caused by rainfall is happening frequently. Specially, causable failure accident by localized downpour accompanied when summer rainy season period and produces typhoon gets damage of large scale human life and property. Failure happened at slope of 121 places ranged whole country national highway by No.15 typhoon Rusa that strike whole country during 3 days from August 30, 2002. Slope failure that happen by typhoon are judged for major cause to effect of ground saturation and surface water by localized downpour. In this research, failure characteristic was analyzed to target 20 places attaining site investigation among failure slope. As a result, erosions by surface water was construed for major cause of failure and judged for direct relation in failure slope weathering and topography Also, result that analyze inclination of failure part, in the case of ripping rock, inclination of failure side is forming Incline of the lowest 40$^{\circ}$, because surface failure of depth 4m on or so scale happened, it is require that regulating plan gently design standard inclination of weathered rock and soil layer And it is considered that desirable preparation of design standard about measure that help smooth drainage of surface water and can restrain percolation in ground to reduce failure damage by rainfall.

• 지질공학
• /
• 제12권2호
• /
• pp.137-150
• /
• 2002

최근 경상분지 퇴적암 지대에서 절개사면 형성 시, 20$^{\circ}$ 저각 경사의 층리면을 따른 평면파괴 양상이 빈번하게 발생하고 있다. 부산시에서 1999년 발생한 황령산 산사태도 이 범부에 속한다. 현재 황령산사면은 사면구배가 1:2.0으로 재조정 되어 2000년도에 공사가 마무리되었다. 황령산 산사태의 사면파괴형태에 대한 분석을 하기위하여 현장 암반조사 및 시험, 시추, 실내 시험, 항공사진판독, X-선 회절분석, 평사투영법 및 한계평형법을 이용한 사면 안정성 분석등이 실시되었다. 그 결과, 산사태 발생 1년 전부터 인장균열들이 연장 발달하는 것이 확인 되었고, 인장균열은 여러방향의 절리들이 합쳐저 생성된 것으로 생각된다. 파괴암체도 각각 다른 층리면을 따라 붕괴된 것으로 분석되었다. 평사투영법 및 한계평형법을 이용한 안정성 검토결과 활동면으로 작용한 녹회색 응회질 셰일층이 풍화된 경우 평면파괴의 위험성이 있는 것이 확인되었다. 향후 이와 유사한 지역에서 절개사면 건설 시, 박층의 풍화에 약한 층에 대한 세밀한 조사가 필요하며 이에 대한 안정성 분석이 수행되어야 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.527-534
• /
• 2000

136 cut slopes which extends from Namyangju to Chunchon city along the 46th national highway were investigated to analyze the influence factors affecting slope instability. Geologic and geotechnical conditions were examined and the detailed investigation were carried out for fifty five failed slopes. failure mode (wedge failure, planar failure, circular failure, sheet eroison and rock falls) are examined with respect to slope inclination, rock type, weathering grade and discontinuity patterns. It is suggested that the failure modes and their dimensions have relations to the morphology and geologic conditions of the slopes. Wedge failure has highest is the most frequent failure mode and falls, sheet erosions, planar failures and circular in descending order of failure percentage. Wedge failure is most dominant failure type over all lithology except quartzite formation. In slopes of well foliated and banded gneiss, failure ratio of wedge is up to 50% ca. Failure ratio(number of rock fall/number of total failure) of rock fall increases with increase fo slope inclinations and decrease of weathering grade. Dimension analyses of failed slopes shows wedge and circular failure has higher value of D/L and D/H than planar failure and sheet erosion.

• 한국지반환경공학회 논문집
• /
• 제12권9호
• /
• pp.13-20
• /
• 2011

산지가 많은 우리나라는 도로 및 철도건설을 위해 사면을 형성하는 구간이 많고, 사계절의 뚜렷한 차이로 인해 해빙기에 암블록의 이완현상 발생과 연평균 강우량의 2/3 정도가 여름철에 집중 발생되는 기후특성이 있으며, 최근 기상이변에 따른 집중호우 등으로 낙석 및 산사태와 같은 도로절개면 붕괴사고가 잦은 편이며, 해마다 장마철이 되면 이와 관련된 사고소식을 매스컴을 통해 쉽게 접할 수 있다. 낙석 발생 시 인명과 재산 피해를 최소화하기 위하여 절개지에 대한 보강공법의 개발 및 현장 적용성에 대한 연구 등이 활발히 이루어지고 있지 않는 실정으로 이에 대한 연구의 필요성이 부각되고 있다. 특히 낙석방지망의 부분적 취약점(일체화가 되지 못함)으로 인해 낙석방지망이 충분한 지지능력을 발휘하지 못하는 문제가 발생됨에 따라 국내에서도 보다 높은 낙석에너지를 지지할 수 있는 낙석방지망에 대한 연구가 필요할 것으로 판단된다. 이에 본 연구에서는 낙석방지망의 대체재료로서 팽창메탈의 적용성을 실험적으로 검증하고, 그 특성에 관해 연구해 보고자 하였다. 시험결과 팽창메탈은 우수한 강도와 일체화된 재료특성으로 기존 PVC망에 비해 최대지지하중이 높게 나타났으며, 현장시험의 흡수가능에너지 또한 높게 나타나 낙석방지망의 대체재료로서 활용이 가능한 것으로 판단된다.