• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.677-682
• /
• 2009

According to the revised law of survey, all the geographic information data including 1/1,000 digital topographic maps have to be converted to world geodetic reference system by the end of 2009. National Geographic Information Institute (NGII) formulated the policy to promote the conversion from local geodetic reference system to world geodetic reference system. However, the current conversion rate is lower than planned due to some impeding factors. Therefore, in this paper, those impeding factors are investigated and then efficient conversion strategies are established and provided. The research involves the validation of affine transformation, the determination of critical value for outlier detection and optimal number of common control points for coordinate conversion, and the treatment of old and new control points.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1577-1585
• /
• 1999

In this paper, we propose detection methods for gradual scene changes such as dissolve, pan, and zoom. The proposal method to detect a dissolve region uses scene features based on spatial statistics of the image. The spatial statistics to define shot boundaries are derived from squared means within each local area. We also propose a method of the camera motion detection using four representative motion vectors in the background. Representative motion vectors are derived from macroblock motion vectors which are directly extracted from MPEG streams. To reduce the implementation time, we use DC sequences rather than fully decoded MPEG video. In addition, to detect the gradual scene change region precisely, we use all types of the MPEG frames(I, P, B frame). Simulation results show that the proposed detection methods perform better than existing methods.

• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.155-163
• /
• 1999

In this paper, we propose novel scene change detection and key frame selection techniques, which use two feature images, i.e., DC and edge images, extracted directly from MPEG compressed video. For fast edge image extraction. we suggest to utilize 5 lower AC coefficients of each DCT. Based on this scheme, we present another edge image extraction technique using AC prediction. Although the former is superior to the latter in terms of visual quality, both methods all can extract important edge features well. Simulation results indicate that scene changes such as cut. fades, and dissolves can be correctly detected by using the edge energy diagram obtained from edge images and histograms from DC images. In addition. we find that our edge images are comparable to those obtained in the spatial domain while keeping much lower computational cost. And based on HVS, a key frame of each scene can also be selected. In comparison with an existing method using optical flow. our scheme can select semantic key frames because we only use the above edge and DC images.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.45-50
• /
• 2004

Currently, structural design of wood structure has been based on ASD (Allowable Structural Design) in Korea. However, the results from this method was known as greater than real value because variations of materials and various conditions were not considered sufficiently. So the study about the design method with probabilistic approach is being performed to overcome this problem. And the standard design method of RBD (Reliability Based Design) has been established and applied. In this study, to apply this method on the domestic wood, the distribution property of the lumber and Glulam was analyzed from the previous report and the basis of the standardized design method was established as soft conversion method from allowable stress used in ASD into reference resistance used in RBD. And through the additional study about the sample size as a important factor to effect on soft conversion, condition to be required in more accurate conversion was evaluated.

• The Southeast Asian review
• /
• v.21 no.2
• /
• pp.125-153
• /
• 2011

본 논문에서는 아시아 경제위기(1997-2000)와 글로벌 경제위기(2007-2010)의 양대 경제위기 이후 진행된 동남아시아 지역의 달러화 현상에 대해 후발국이면서 체제전환국 성격이 강한 캄보디아, 라오스, 베트남을 중심으로 분석하였다. 이를 위해 로하스-수아레즈(Rojas-Suarez 1992) 모형을 활용하여 양대 경제위기의 위 3개국의 달러화 현상에 대한 영향을 비교 분석하였다. 동 모델에 의하면 경제위기는 자국화폐에 대한 신뢰를 떨어뜨려 자국 화폐가치에 대한 예상평가절하율(예상환율상승률)이 크면 클수록 자국화폐 대비 달러화에 대한 수요는 증가될 것으로 예상된다. 분석 결과 아시아 경제위기의 경우 모델의 예상대로 자국 화폐의 예상평가절하 시 달러화의 수요를 나타내는 탄력성 계수가 통계적으로 유의하였다. 국가별로는 캄보디아, 라오스, 베트남의 순서로 탄력성이 크게 나타났으며 이는 각 국의 달러화 수준과 비례하는 결과이다. 이에 비해 글로벌 경제위기의 경우에는 캄보디아를 제외하면 탄력성 계수가 유의하지 않은 것으로 나타났다. 또한 캄보디아의 경우에도 탄력성 계수가 아시아 경제위기의 경우에 비해 감소된 것으로 나타났다. 이러한 결과는 달러화 현상에 있어서 아시아 경제위기에 비해 글로벌 경제위기의 영향이 상대적으로 작다는 것을 의미한다. 이는 동남아시아에 대한 글로벌 경제위기의 부정적 영향이 상대적으로 작았다는 기존의 연구들의 주장과 일치한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6B
• /
• pp.373-378
• /
• 2012

In this study, a new empirical equation for the transverse dispersion coefficient has been developed based on the theoretical background in river bends. The nonlinear least-square method was applied to determine regression coefficients of the equation. The estimated dispersion coefficients derived by the new equation were compared with observed transverse dispersion coefficients acquired from natural rivers and coefficients calculated by the other existing empirical equations. From a comparison of the existing transverse dispersion equations and the new proposed equation, it appears that the behavior of the existing formula in a relative sense is very much dependent on the friction factor and the river geometry. However, the new proposed equation does not vary widely according to variation of friction factor. Also, it was revealed that the equation proposed in this study becomes an asymptotic curve as the curvature effect increases.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.111-121
• /
• 2010

DHV (Design-Hour Volume) for the estimation of number of lanes is determined by design-hour factor (K). The design-hour factor is defined as the proportion between the 30th highest hourly volume and AADT and determines the level of road planning. However, the K-factor estimated by an existing method has a problem because the hourly volumes on holiday and weekend appear in the relatively low rank in real world in spite of expected high volumes. To improve this problem, this study make use of the concept of traffic demand in estimating the design-hour factor. After the congested hourly volumes transfer to traffic hourly demand, the K-factors are estimated on urban expressways and are compared to the existing K-factors. It is perceived that the new K-factors have more realistic values due to utilizing the traffic demand. reflecting the congested flow.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1247-1257
• /
• 2015

The river water intake system composed of the filter block, without installation of weirs in a channel, was proposed. To apply it to rivers, analysis of hydraulic characteristics is needed. In this study, the hydraulic experiment on the characteristics of flowrate passing through the river water intake system was carried out. The filter block was produced using riprap and stainless steel bead at the channel bottom. The experiment was carried out under various flow conditions and the flowrate passing through the intake system was measured. As the water depth approaching the intake system became deeper, the flowrate diverting to the intake system increased. As the Froude number increased, the flowrate diverting to the intake system decreased. The same trend was shown regardless of the characteristics of a filter block in the intake system. A constant discharge coefficient was shown regardless of the Froude number but it changed according to the size of a riprap and a stainless steel bead in the filter block. It was found that the discharge coefficient increases with the 0.6 power of the material size.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1098-1101
• /
• 2006

최근 3대강특별법에 의하여 시행되고 있는 환경부의 수질오염총량관리를 위해 서낙동강 유역인 낙본N 단위유역에 대한 해당 지자체의 기본계획과 시행계획이 수립된 바 있다. 낙본N 단위유역은 서낙동강을 중심으로 좌측의 대부분이 경상남도 김해시이고, 우측과 하류부는 부산광역시 강서구이다. 서낙동강은 평상시에는 주요 농업용수 공급원과 철새도래지로서 홍수시에는 거대한 유수지 역할을 하고 있다. 서낙동강 유역내에는 분뇨처리장, 하수처리장, 농업 및 축산활동, 내수면 양식어업, 오염원 배출공장 등의 점, 비점오염원이 있으며 대저수문과 녹산수문에 의해 조절되는 정체수역으로서 오염부하강도가 높은 유입지천들로 인하여 상습적인 녹조 발생수역으로 수질개선의 필요성이 매우 높은 지역이다. 본 연구에서는 대표 유역으로 낙본N유역의 소유역 중 배출부하량이 가장 큰 지류에 해당하는 조만강 유역인 낙본N06 소유역의 오염원 조사결과를 이용하여 오염부하량 산정기법을 검토하였다. 장래 오염부하량 예측은 자연증가, 개발계획, 삭감계획에 의해 산정하는데, 이와 같은 과정에서 과거 오염원조사, 부하량산정, 폐수 배출부하량 모니터링 과정에서의 불확실성이 따르게 된다. 본 연구에서는 이와 같은 오염부하량산정 과정에서의 정확도를 높이고자 오염원 자료의 증감에 따른 오염부하량 산정결과의 민감도 분석을 통하여 신뢰도 평가를 수행하였다. 방대한 오염원자료를 이용한 오염부하량 산정은 한국환경정책평가연구원(KEI)에서 개발한 데이터베이스관리 프로그램(Access Program)을 이용하였으며, 각 오염원별 오염원 현황 및 전망 결과와 환경부의 수계오염총량관리기술지침에서 제시한 각 오염원별 오.폐수발생원단위, 배출원단위, 전환계수, 배출계수 등을 이용하여 각 오염원별 배출부하량을 산정하였다. 본 연구에서는 오염원 조사나 장래 오염원 예측에서 있을 수 있는 오차에 대한 전체 배출부하량의 변화를 살펴봄으로써 방대한 양의 오염원 조사시에 정확성 및 효율성을 높이고자 하였다. 본 연구의 결과를 통해 할당부하량을 개별 오염원별로 할당하고 적정한 개발계획과 실현가능한 삭감계획 및 이행방안을 수립하기 위한 오염원조사를 수행함에 있어 기초자료의 효율적인 관리를 통해 오염부하량 산정의 정확성을 높이고자 한다.

• Land and Housing Review
• /
• v.3 no.3
• /
• pp.279-286
• /
• 2012

The limit states design method is replacing the allowable stress design method worldwide, e.g. the design code of ISO and various construction codes of Korea are adopting the reliability based limit state method. This paper proposed LRFD design value which is one of limit states design method for the PHC bored pile used as building foundation. This paper analysed 81 load test results and the bearing design(Meyerhof method & SPT-CPT conversion method), and proposed LRFD value for each design reliability Index 2.33 and 3.0 for PHC bored pile. LRFD value of PHC bored pile represents 0.36~0.44 for Meyerhof method and 0.24~0.31 for SPT-CPT conversion method according to the deign reliability index.