• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.207-212
• /
• 1996

실증규모의 수지충전식 전기투석 재생조를 사용하여 농축음극액내 바나듐의 전기화학적 환원 방법에 의한 재생거동을 조사하였다. 전기투석 분리재생 종료후 남아있는 개미산용액을 전해액으로 사용한 농축음극액내 전기투석된 철 및 코발트는 음극액의 pH를 약 4.3내외로 조절하면 전해환원에 의해 전착.제거된다. 또한 농축음극액내 바나듐은 +2가로 전해환원 되어 착화물을 이루고 있는 Vanadous picolinate 형태로 존재하기 때문에 음극액은 농축된 LOMI 제염제로 재생된다. 이 전해환원에 의한 농축음극액의 재생방법은 제염폐액의 전기투석 분리재생 후 피콜리네이트 착화제만을 재사용하는 기존의 재생개념보다 더욱 효과적으로 제염폐액을 재생시켜 재활용할 순 있는 방사성폐기물의 감용효율이 큰 향상된 제염폐액 재생공정이다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.59-61
• /
• 2015

본고에서는 전해동박의 개발 연혁, 제조 공정 및 주요 적용 사례에 대해 소개한다. 전해동박이 전자 소재에 적용되는 대표적인 사례는 Li 이차전지의 음극 집전체 및 인쇄회로기판의 회로이다. Mobile Device의 슬림화 및 다기능화에 따라 Li 이차전지의 용량 증대 및 인쇄회로기판의 협피치화가 필요하다. 따라서 Li 이차전지의 단위 부피당 용량 증대를 위해서는 음극 집전체로 적용되는 동박은 극박화 및 고강도 특성이 요구되고 있다. 인쇄회로기판의 협피치화에 따라 이들 제품에 적용되고 있는 동박은 두께 및 조도를 저감시키는 방향으로 기술이 전개되고 있다. 본고에서는 전자 소재용으로 적용되고 있는 전해 동박의 최근 제품 및 기술 동향과 향후 제품 전개 방향에 대해 논의하고자 한다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1995.03a
• /
• pp.118-132
• /
• 1995

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.443-443
• /
• 2005

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.10a
• /
• pp.203-204
• /
• 2012

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.283-295
• /
• 2007

The technical feasibility of a pyroprocessing of PWR spent fuels to recover nuclear fuel materials, uranium and transuranic elements group(TRU), was examined in this study. Also its applicability as a new fuel cycle technology in terms of non-proliferation was investigated. First, various unit processes were combined to a pyroprocess. Then the flow aspects of such materials of issue as uranium, transuraniums, rare earth, noble metals and heat generating elements were examined on the flowsheet, which was obtained by the assumptions on the basis of various experimental results in this work or separation data collected from literatures. Consequently, the calculated results of the material balance for the whole process showed that uranium and TRU could be recovered as products by 98.0 % and 97.0 %, respectively, from a PWR spent fuel while removing the other elemental groups into radioactive wastes. On the one hand, the TRU product was found to emit a considerable amount of ${\gamma}$-ray as well as neutrons favorably contributing to the strategy of proliferation resistance.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1225-1230
• /
• 2010

본 연구는 군부대 사격장의 중금속 오염토양에 대하여 생물학적 용출기술(BT)과 전기동력학적 기술(ET)의 통합공정의 적용성 평가 연구에 대한 것이다. 사격장 오염 토양의 경우 사격에 의해 탄두가 피탄지에 박히면서 오염토양 내에 잔존하여 탄두를 구성하는 주성분인 납과 구리 등에 의해 지속적인 오염원으로 작용하는 특징을 가진다. 따라서 사격장 토양오염정화를 위해서는 이 탄두를 물리적으로 선별하는 물리적 선별공정을 전처리공정으로 수행한 후 인공적으로 조성된 셀에 통합공정 적용성 평가를 위한 현장실증시험을 수행하였다. 생물학적 용출을 통해 토양내 잔류하는 중금속을 이온화시켜 이동성을 크게 한후 전기동력학적 기술을 통해 토양내에서 전해질로 이동시켜 최종적으로 전해질을 처리하는 시스템으로써 공정 모니터링결과 납과 구리 모두 주목할 만한 제거효율을 얻을수 있었다. 오염물질별 공정 적용성 평가결과 납의 경우 황산화박테리아에 의해 이온화가 되지만 황산화박테리아의 생장 부산물인 황산염이온(${SO_4}^{2-}$)과 반응하여 안정성이 큰 Anglesite($PbSO_4 $)를 형성하므로 전체적인 제거효율이 저하되는 것을 확인하였고 기타 미생물을 이용한 생물학적 용출기술 연구의 필요성을 확인하였다. 구리의 경우 황산염박테리아를 이용한 생물학적 용출공정 및 전기동력학적 처리공정의 통합공정을 통해 주목할 만한 제거효율을 얻을수 있었으며 통합공정의 효율성을 확인할 수 있었다. 본 연구를 통하여 미생물학적 용출기술과 전기동력학적 기술의 통합공정은 현장특이성(Site-specific) 확인후 적용가능성이 있음을 확인하였다.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2006

The effects of electrolytes were investigated on the removal efficiency when several different electrolytes were used to change the electrode reaction in an electrokinetic (EK)-Fenton process to remediate phenanthrene-contaminated soil. Electrical potential gradient decreased initially due to the ion entrance into soil and then increased due to the ion extraction from soil under the electric field. Accumulated electroosmotic flow was $NaCl>KH_2PO_4>MgSO_4$ at the same concentration because the ionic strength of $MgSO_4$ was the highest and $Mg(OH)_2$ formed near the cathode reservoir plugged up soil pore to inhibit water flow. When hydrogen peroxide was contained in electrolyte solution, removal efficiency increased by Fenton reaction. When NaCl was used as an electrolyte compound, chlorine ($Cl_2$) was generated at the anode and dissolved to form hypochlorous acid (HClO), which increased phenanthrene removal. Therefore, the electrode reaction of electrolyte in the anode reservoir as well as its transport into soil should be considered to improve removal efficiency of EK-Fenton process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.12
• /
• pp.1743-1749
• /
• 2011

The microbial reduction and quality characteristics of salted Chinese cabbage using electrolyzed water were investigated. The electrolyzed water was used to control the microbes in the processes of primary washing, salting, and secondary washing. The total bacteria, lactic acid bacteria, coliform, pH, salinity, vitamin C, and total sugar were analyzed. After primary washing by electrolyzed water, the total bacteria populations were reduced to 2.78 log cfu/g, and the coliform populations were similarly reduced. After secondary washing by electrolyzed water, the total bacteria population of Chinese cabbage was reduced to a maximum of 1.5 log cfu/g. The salinity of Chinese cabbage and salting solutions increased rapidly over three hours, and then increased slowly. The sterilization effect of electrolyzed salting water could not last beyond 3 hours, because the OHCl concentration of electrolyzed water was reduced by over 90% at the third hours of the salting process. Vitamin C was reduced and total sugar did not change regardless of treatments during the salting process. Consequently, electrolyzed water was effective to remove microbes from salted Chinese cabbages.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.213-218
• /
• 2009

Electrowinning process recovers uranium with actinide elements from spent fuels and is a key step in the Pyroprocessing because of proliferation resistance. An analysis of heat transfer of the Electrowinning cell was conducted to develop basic tool for designing engineering-scale Electrowinner. For the calculation of the heat transfer, ANSYS CFX commercial code was adapted. As a result of the calculation, the vertical Heating Zone length had great effect upon temperature of LiCl-KCl eutectic salt. To maintain constant temperature in the salt, the Heating Zone length should be three times longer than the height of the salt. However, the argon and salt temperatures were barely affected by the Cooling Zone length. The temperature under the Cell cover was mainly influenced by the number of the cooling plates. When the cooling plates were installed more than the number of 5, temperature under the cover was maintained below $250^{\circ}C$. These temperature properties had similar tendency toward the temperature of the Cell which was measured from experiments, Simulated heat transfer information from this study could be used to design engineering-scale Electrowinner.